Леонид Юрьев wrote: > Hi, Howard. > > I would like to introduce the MDB_PICKUP flag for mdb_dpi_open(). > Please see > > https://github.com/ReOpen/ReOpenLDAP/commit/04f92c952e42ff4c843135c42fdb9... > > At least, this is required for mdb_chk tool, when a DBI should be opened > with flags that stored inside LMDB, which while a DBI was created. It is > particularly important for DBI_MAIN. > This flag is completely unnecessary. Opening an existing DBI with flags=0 accomplishes that task already. -- -- Howard Chu CTO, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

Леонид Юрьев wrote: > Hm, but how open dbi which some flags, ensure that are present? > > Same for main-dbi without change stored flags? > If you want to verify which flags are present, use mdb_dbi_flags() to retrieve them after opening. This is why most of your posts meet negative responses - you attempt to make changes before understanding how the existing system works. That's not a good or productive approach to software development. 30.04.2015 19:16 пользователь "Howard Chu" <hyc(a)symas.com > <mailto:hyc@symas.com>> написал: > > Леонид Юрьев wrote: > > Hi, Howard. > > I would like to introduce the MDB_PICKUP flag for mdb_dpi_open(). > Please see > > https://github.com/ReOpen/ReOpenLDAP/commit/04f92c952e42ff4c843135c42fdb9... > > At least, this is required for mdb_chk tool, when a DBI should > be opened > with flags that stored inside LMDB, which while a DBI was > created. It is > particularly important for DBI_MAIN. > > > This flag is completely unnecessary. Opening an existing DBI with > flags=0 accomplishes that task already. > > -- > -- Howard Chu > CTO, Symas Corp. http://www.symas.com > Director, Highland Sun http://highlandsun.com/hyc/ > Chief Architect, OpenLDAP http://www.openldap.org/project/ > > -- -- Howard Chu CTO, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/