Re: Syncrepl and multipe values
by Quanah Gibson-Mount
--On Friday, January 06, 2017 6:50 PM +0000 Matheus Eduardo Bonifacio
Morais <matheus_morais(a)sicredi.com.br> wrote:
>
>
>
> Issue 8559 opened.
>
>
>
> I'm trying to work on a patch but I'm not sure if the best solution is to
> fix accesslog to avoid duplicated values or if the sample LDIF (in its
> description) should result in a constraint violation. What do you think?
The accesslog should never write an operation that can't be replicated. If
the MOD is a valid LDAP operation (which I think it is), then it should be
accepted at the frontend. The issue may be more in delta-syncrepl's
handling of the write op than anything else.
--Quanah
--
Quanah Gibson-Mount
Product Architect
Symas Corporation
Packaged, certified, and supported LDAP solutions powered by OpenLDAP:
<http://www.symas.com>
5 years, 6 months
How to enable memberOf overlay with posixGroup?
by MegaBrutal
Hi all,
I've spent days trying to figure out how could I enable the memberOf
overlay, and it doesn't seem to be easy for an LDAP-noob. I've read
like 50+ tutorials which didn't help me get it working.
Use case: I want to have 2 main groups which control access to
different services on my network. A "unixusers" which is a minimum to
log in to Linux servers (having a hostObject entry for the user is
another requirement, which is irrelevant to this question, as I
already solved that problem); and a "cloudusers" group which enables
log in to my ownCloud instance.
The groups should enforce the following rules:
– Only users in "cloudusers" should be allowed to log in to ownCloud.
– Users in "unixusers" are allowed to log in to a set of Linux servers
controlled by "host" (hostObject) entries.
– Users not in the "unixusers" group may not log in to any Linux
systems, even if they have "host" entries.
Problems:
– ownCloud complains that the memberOf overlay is not enabled, hence
it doesn't let me restrict access to the "cloudusers" group. It would
allow any users regardless of any group memberships, which is not
acceptable.
– I have a similar problem on Linux with PAM: I can't really get it to
consider "unixusers" membership for user logins, although I got the
"host" entries working correctly, so at least I can already restrict
access with that.
My guess is that it all boils down to the lack of memberOf overlay. I
also figured that memberOf would need groupOfNames groups, while I
need posixGroup type groups. I evaluated the possibility to use
groupOfNames, but it lacks the necessary gidNumber attribute which is
a requirement for Unix groups. But anyway, I can't enable memberOf
even for groupOfNames. I can't enable memberOf by any means.
My OpenLDAP uses the new configuration method and it completely
ignores slapd.conf, so the config must be injected with ldapadd to
cn=config.
Could you please help me with this?
Regards,
MegaBrutal
6 years, 1 month
Re: problem with syncrepl and STARTTLS
by Quanah Gibson-Mount
--On Friday, June 02, 2017 11:01 AM +0200 r0m5 <r0m5(a)r0m5.eu> wrote:
>
> Hello,
>
> I am facing an issue with syncrepl and STARTTLS on 389 port. The kind of
> problem happening only sometimes, and disappearing "by itself". I use
> Debian Jessie, OpenLDAP 2.4.40+dfsg-1+deb8u2.
2.4.40 is 2.5 years old, 5 point releases behind, and had significant known
replication issues. I believe there is a build of 2.4.44 in backports for
Jessie. I would advise using that instead.
As far as debug logging, you would need to use "-d -1" to slapd, rather
than attempting to set the loglevel to -1, as some debug logging is only
possible via the slapd daemon. But your first step is to move to a current
release.
--Quanah
--
Quanah Gibson-Mount
Product Architect
Symas Corporation
Packaged, certified, and supported LDAP solutions powered by OpenLDAP:
<http://www.symas.com>
6 years, 1 month
Re: mdb_dbi_open and threads
by Howard Chu
Hallvard Breien Furuseth wrote:
> On 22. mai 2017 14:00, Howard Chu wrote:
>> Muhammed Muneer wrote:
>>> Hallvard wrote
>>
>>> "With threads 1 and 2 coexisting? When thread 2 called mdb_dbi_open(),
>>> thread 1's prospect of using mdb_dbi_open() at all was lost."
>>>
>>> Yeah with both coexisting. Thats what I thought.
>
> Sorry, I should have said with _transactions_ #1 and #2 coexisting,
> _transaction_ #1's prospect of using mdb_dbi_open() at all was lost.
> Transaction #3 in thread #1 can use it if it stared after txn#2 ended.
>
> Anyway, just forget about being clever with DBIs. LMDB does not support
> DBI cleverness, that's one of its trade-offs for speed and simplicity.
Exactly.
>> If you want to use dbi_open in multiple threads then put it in your own
>> wrapper function, protected by a mutex.
>
> Wait, what? mdb_dbi_open() isn't coded to handle concurrent txns
> calling it, regardless of any mutexes the caller has. In particular,
> it does not use nor update the environment's numdbs, so the two
> transactions could end up creating the same DBI for different DBs.
Yes. This is only safe if you also close the dbi in the same txn that opened
it. Which you are probably doing, if you are opening and closing on the fly.
>
>> Naturally you will also have to wrap dbi_close the same way.
>
> If we did support this, txn_commit() of the txn which used dbi_open()
> would also need the mutex.
--
-- Howard Chu
CTO, Symas Corp. http://www.symas.com
Director, Highland Sun http://highlandsun.com/hyc/
Chief Architect, OpenLDAP http://www.openldap.org/project/
6 years, 1 month
Blacklists of simple values in LDAP attribute constraints overlay?
by Florian Best
Hello,
I am searching for a way to add an LDAP constraint on attributes which
prevents setting specific values.
For example, I want to prevent that the attribute "uid" is equal to
(case insensitive) "foo" or "bar".
Using the manpage from https://linux.die.net/man/5/slapo-constraint it
seems not possible, I tried a lot of things like:
constraint_attribute uid set "this/uid & ([foo])"
constraint_attribute uid set "this/uid & [foo]"
constraint_attribute uid uri
ldap:///dc=school,dc=local?forbidden?sub?(objectClass=forbiddenUsernames)
constraint_attribute uid regex ^[^f][^o][^o]*$
Even if they were working (they don't) I needed to reverse the whole
constraint because this would only allow me to add a whitelist while I
want to add a blacklist. (Best would be If I could just add a "!" before
the attribute contsraint.)
I hope there is something which could help me.
Best regards
Florian
--
Florian Best
Open Source Software Engineer
Univention GmbH
be open
Mary-Somerville-Str.1
28359 Bremen
Tel.: +49 421 22232-0
Fax : +49 421 22232-99
best(a)univention.de
http://www.univention.de
Geschäftsführer: Peter H. Ganten
HRB 20755 Amtsgericht Bremen
Steuer-Nr.: 71-597-02876
6 years, 1 month
Re: [Q] can I replicate several branches to the same slave from one master?
by Quanah Gibson-Mount
--On Friday, June 30, 2017 8:32 AM +0300 Zeus Panchenko <zeus(a)ibs.dn.ua>
wrote:
>> And what does the master say?
>>
>
> same thing:
>
> slapd[38004]: conn=30116 op=3 SEARCH RESULT tag=101 err=53 nentries=0
> text=consumer state is newer than provider!
It sounds like your replica was not configured correctly initially and
self-generated its own CSN that is newer than the one on the provider. It
would be interesting to make a modification on the provider so that its CSN
is updated (and thus has one newer than on the consumer).
--Quanah
--
Quanah Gibson-Mount
Product Architect
Symas Corporation
Packaged, certified, and supported LDAP solutions powered by OpenLDAP:
<http://www.symas.com>
6 years, 1 month
[Q] "selective" ACL
by Zeus Panchenko
hi,
I'm trying to configure a not complex (as I believe) ACL ... but have some
difficulties
I have two posixGroup groups
cn=admins,ou=group,dc=foo
cn=coadmins,ou=group,dc=foo
my users resides in ou=People,dc=foo
so, in subtree ou=People,dc=foo I need to allow anything to admins (and
it is not difficult of course)
for example this works for me:
access to dn.subtree="ou=People,dc=foo"
by set="[cn=admin,ou=group,dc=foo]/memberUid & user/uid" manage
by self write
by users read
by * break
but in addition I need to allow my coadmins to do the same things except
manipulations upon the objects which belong to admins (
...anyobject,uid=adminuser,ou=People,dc=foo )
so, the question is: how? (if it is possible at all) :(
please, advise
--
Zeus V. Panchenko jid:zeus@im.ibs.dn.ua
IT Dpt., I.B.S. LLC GMT+2 (EET)
6 years, 1 month
Sometimes openldap messages are logged in incorrect order
by Amit
Hello,
I find sometimes order of event in openldap logs as:
BIND
RESULT
ACCEPT
SRCH base
SRCH attr=
SEARCH RESULT
closed
Configured rsyslog as:
$template myTemplate,"%timegenerated:::date-rfc3339%
%timereported:::date-rfc3339% %msg%\n"
local4.*
/var/log/rsyslog.log;myTemplate
But I believe correct order should be:
Accept
Bind
result
srch base
unbind
closed
What cant be the reason, is it related to openldap logging mechanism or
Logger rsyslog.
--
Thanks
Amit
6 years, 1 month
Re: Antw: Re: Limiting Search Results By Group Membership
by Howard Chu
Ulrich Windl wrote:
>>>> Howard Chu <hyc(a)symas.com> schrieb am 25.07.2017 um 14:27 in Nachricht
> <48d74363-2f0a-739f-d719-515e1fe14997(a)symas.com>:
>> Ulrich Windl wrote:
>>> BTW: Is there an LDAP query to get the schema name for an object class?
>>> I can list objectclasses and schematas, but I miss the link between those.
>>
>> You can search under cn=schema,cn=config using filter
>> (olcObjectClasses=*<objectclass name>*)
>
> Hi!
>
> Thanks, but I don't quite get it: If I'm trying for "ipService" (which is known), I get an empty result:
>
> # ldapsearch -Y EXTERNAL -H ldapi:/// -b 'cn=schema,cn=config' -s one '(olcObjectClasses=ipService)' '* +'
> SASL/EXTERNAL authentication started
> SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth
> SASL SSF: 0
> # extended LDIF
> #
> # LDAPv3
> # base <cn=schema,cn=config> with scope oneLevel
> # filter: (olcObjectClasses=ipService)
> # requesting: * +
> #
>
> # search result
> search: 2
> result: 0 Success
>
> Can you give a concrete example, maybe?
Pay attention to details.
The filter I specified was ( * <objectclass name> * ) - a substring filter.
The filter you used was an exact match filter, which obviously doesn't match
anything.
--
-- Howard Chu
CTO, Symas Corp. http://www.symas.com
Director, Highland Sun http://highlandsun.com/hyc/
Chief Architect, OpenLDAP http://www.openldap.org/project/
6 years, 1 month
