openldap-bugs

openldap-bugs@openldap.org

1 participants
20959 discussions

[Issue 10275] New: mdb_load could use a parameter to pass batch size
by openldap-its＠openldap.org 10 Dec '24

10 Dec '24

https://bugs.openldap.org/show_bug.cgi?id=10275 Issue ID: 10275 Summary: mdb_load could use a parameter to pass batch size Product: LMDB Version: 0.9.21 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: tools Assignee: bugs(a)openldap.org Reporter: gkwicker(a)amazon.com Target Milestone: --- Created attachment 1037 --> https://bugs.openldap.org/attachment.cgi?id=1037&action=edit Patch to mdb_load.c in version 0.9.21 mdb_load is very slow when ingesting a large db. The attached patch (0.9.21 but will apply to other versions with modification) allows the user to pass a batch size to be used instead of the default value of 100. Changing the batch size to a larger value improves ingestion speed. I, Gary Wicker, hereby place the following modifications to OpenLDAP Software (and only these modifications) into the public domain. Hence, these modifications may be freely used and/or redistributed for any purpose with or without attribution and/or other notice. -- You are receiving this mail because: You are on the CC list for the issue.

1 22

[Issue 10286] New: ldap_pvt_gettime may result in "not new enough csn" problems in multi-thread case.
by openldap-its＠openldap.org 02 Dec '24

02 Dec '24

https://bugs.openldap.org/show_bug.cgi?id=10286 Issue ID: 10286 Summary: ldap_pvt_gettime may result in "not new enough csn" problems in multi-thread case. Product: OpenLDAP Version: 2.6.6 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: libraries Assignee: bugs(a)openldap.org Reporter: 971748261(a)qq.com Target Milestone: --- Created attachment 1041 --> https://bugs.openldap.org/attachment.cgi?id=1041&action=edit the log of adding two entry which shows the time sequence. I used openldap as krb5's database, and openldap was deploymented in mirrormode. I tried to add kerberos principals via kadmin.local -q "addprinc -randkey principal. slapd log showed that the entry of kadmin/admin was added earlier than the entry of ossuser. But the csn of kadmin/admin was greater than ossuser. In this case, when the two entry began to sync to the other slapd server, ossuser was ignored because of "csn not new enough" -- You are receiving this mail because: You are on the CC list for the issue.

1 4

[Issue 7441] cn=config filters ignore {number}
by openldap-its＠openldap.org 27 Nov '24

27 Nov '24

https://bugs.openldap.org/show_bug.cgi?id=7441 --- Comment #3 from Ondřej Kuzník <ondra(a)mistotebe.net> --- https://git.openldap.org/openldap/openldap/-/merge_requests/662 -- You are receiving this mail because: You are on the CC list for the issue.

1 0

[Issue 10218] New: Disabling and re-enabling an asyncmeta database via cn=config leaks memory
by openldap-its＠openldap.org 26 Nov '24

26 Nov '24

https://bugs.openldap.org/show_bug.cgi?id=10218 Issue ID: 10218 Summary: Disabling and re-enabling an asyncmeta database via cn=config leaks memory Product: OpenLDAP Version: 2.6.7 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: backends Assignee: bugs(a)openldap.org Reporter: nivanova(a)symas.com Target Milestone: --- To reproduce - run OpenLDAP with valgrind, and set the olcDisabled attribute of an asyncmeta database to TRUE, then again to FALSE. The connection structures of the database are subsequently shown as leaked. -- You are receiving this mail because: You are on the CC list for the issue.

1 4

[Issue 10249] New: slapo-nestgroup leak with non-nested groups
by openldap-its＠openldap.org 26 Nov '24

26 Nov '24

https://bugs.openldap.org/show_bug.cgi?id=10249 Issue ID: 10249 Summary: slapo-nestgroup leak with non-nested groups Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: overlays Assignee: bugs(a)openldap.org Reporter: ondra(a)mistotebe.net Target Milestone: --- Searching for a member= of a group when no nesting is in place will leak memory. It seems to stem from a few `gi.gi_numDNs` tests that should most likely be against `gi.gi_DNs` instead. -- You are receiving this mail because: You are on the CC list for the issue.

1 5

[Issue 10263] New: ldapmodify error messages should be more helpful when dealing with trailing whitespace
by openldap-its＠openldap.org 26 Nov '24

26 Nov '24

https://bugs.openldap.org/show_bug.cgi?id=10263 Issue ID: 10263 Summary: ldapmodify error messages should be more helpful when dealing with trailing whitespace Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: client tools Assignee: bugs(a)openldap.org Reporter: ondra(a)mistotebe.net Target Milestone: --- Often when copy-pasting, a trailing whitespace can sneak in to a modify LDIF (e.g. "delete: attribute \nattribute: ..."), ldapmodify should emit a different message than: "ldapmodify: wrong attributeType at line x" because that is just not helpful. First off, the line number refers to the one that's usually correct. Emitting an "expecting '%s'" would be a start. Maybe we should even warn/error when an attribute name in a change record contains whitespace, because it's not valid as RFC 2849 grammar only allows ALPHA/DIGIT/'-'/'.'/';' anyway. -- You are receiving this mail because: You are on the CC list for the issue.

1 5

[Issue 10234] New: syncrepl does not reset the retrynum
by openldap-its＠openldap.org 26 Nov '24

26 Nov '24

https://bugs.openldap.org/show_bug.cgi?id=10234 Issue ID: 10234 Summary: syncrepl does not reset the retrynum Product: OpenLDAP Version: 2.6.8 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: hamano(a)osstech.co.jp Target Milestone: --- ``` syncrepl retry="5 10 30 +" ``` When replication fails with the above settings, syncrepl retries "10 times at 5 second intervals". Then, the retry count should be reset on the next replication failure. In actual, it does not reset. The behavior is as follows: ``` (first time replication failure) do_syncrepl: rid=001 rc -1 retrying (9 retries left) do_syncrepl: rid=001 rc -1 retrying (8 retries left) (resume replication) (second time replication failure) do_syncrepl: rid=001 rc -1 retrying (7 retries left) do_syncrepl: rid=001 rc -1 retrying (6 retries left) ``` -- You are receiving this mail because: You are on the CC list for the issue.

1 6

[Issue 10235] New: Configure without --enable-nestgroup=no enables feature
by openldap-its＠openldap.org 26 Nov '24

26 Nov '24

https://bugs.openldap.org/show_bug.cgi?id=10235 Issue ID: 10235 Summary: Configure without --enable-nestgroup=no enables feature Product: OpenLDAP Version: 2.6.8 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: stacey.marshall(a)gmail.com Target Milestone: --- OpenLDAP 2.6.8 configured with --enable-overlays. Some openldap commands output a Duplicate attributeType notice, for example # /sbin/slapcat -b cn=config -H ldap:///???olcTLSCertificateKeyFile=\* | grep olcTLSCertificateKeyFile register_at: AttributeType "( 1.2.840.113556.1.2.102 NAME 'memberOf' DESC 'Group that the entry belongs to' SYNTAX '1.3.6.1.4.1.1466.115.121.1.12' EQUALITY distinguishedNameMatch USAGE dSAOperation NO-USER-MODIFICATION X-ORIGIN 'iPlanet Delegated Administrator' )": Duplicate attributeType, 1.2.840.113556.1.2.102 olcTLSCertificateKeyFile: /etc/certs/localhost/host.key Specifying configure option --enable-nestgroup=no prevents nestgroup feature and the message from being displayed. -- You are receiving this mail because: You are on the CC list for the issue.

1 6

[Issue 10256] New: Custom attribute disappears after slapd restart
by openldap-its＠openldap.org 26 Nov '24

26 Nov '24

https://bugs.openldap.org/show_bug.cgi?id=10256 Issue ID: 10256 Summary: Custom attribute disappears after slapd restart Product: OpenLDAP Version: 2.4.57 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: backends Assignee: bugs(a)openldap.org Reporter: heinrich.blatt(a)googlemail.com Target Milestone: --- Hi, i want to use a custom attribute in my schema. I use that ldif: dn: cn=schema,cn=config changetype: modify add: olcAttributeTypes olcAttributeTypes: ( 1.2.840.113556.1.4.7000 NAME 'rfidtoken' DESC 'RFID Token' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) This i inject via ldapmodify. For the session it works, but after restarting slapd the attribute disappears. If i add it again via ldapmodify it is there for the session again. My /etc/ldap/slapd.d/cn=config/cn=schema.ldif contains the change. This seems related to #9066, however the documentation indicates that i can make the changes via ldapmodify persistent. What is the right approach there? What i can do to persist the change? Thanks in advance for support -- You are receiving this mail because: You are on the CC list for the issue.

1 8

[Issue 8047] TIMEOUT and NETWORK_TIMEOUT don't work properly with SSL
by openldap-its＠openldap.org 26 Nov '24

26 Nov '24

https://bugs.openldap.org/show_bug.cgi?id=8047 Quanah Gibson-Mount <quanah(a)openldap.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |VERIFIED -- You are receiving this mail because: You are on the CC list for the issue.

1 0

← Newer
1
...
7
8
9
10
11
12
13
...
2096
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openldap-bugs