Re: (ITS#6173) Error while making
by mkassawara＠gmail.com
I recommend upgrading both BDB and OpenSSL. You might want to check
out the following sites which offer fairly recent precompiled packages
of open source software to save yourself a few headaches on AIX...
http://pware.hvcc.edu
http://www.perzl.org/aix
OpenLDAP does not require SASL, but you might need it depending on how
you plan to deploy the former.
On Jun 17, 2009, at 7:34 PM, <Bipin.Nair(a)iflexsolutions.com> wrote:
> Thanks.
> Do you think that the OpenSSL and Berkley DB version also should
> change when I go with a upgraded OpenLDAP version?
>
> Also,is it mandatory to have Cyrus sasl also installed prior to
> OpenLDAP?
>
>
>
> From: mkassawara(a)gmail.com on behalf of Matt Kassawara
> Sent: Wed 6/17/2009 09:30
> To: Bipin Nair-SJR
> Cc: openldap-its(a)openldap.org
> Subject: Re: (ITS#6173) Error while making
>
> You are using a deprecated version of OpenLDAP. Consider upgrading
> to a recent version... preferrably 2.4.
>
> On Wed, Jun 17, 2009 at 4:42 AM, <bipin.nair(a)iflexsolutions.com>
> wrote:
> Full_Name: Bipin
> Version: OpenLDAP2.2.29
> OS: AIX 5.3
> URL: ftp://ftp.openldap.org/incoming/
> Submission from: (NULL) (203.127.116.93)
>
>
> Hi,
>
> While trying to install OpenLDAP 2.2.29 ,I getting the following
> error during
> the 'make' step.
>
>
> ---------------------------------------------------------------------
> Notes:-
>
> 1)I have installed OpenSSL 0.9.7 and Berkley DB 4.5.20
>
> 2)Also,the follwing variables are set
> CPPFLAGS
> LDFLAGS
> LIBPATH
>
> 3)THe follwoing commands were used as steps to install Openldap
> cd openldap-2.2.29
> ./configure --enable-ldbm
> make depend
> make (During this step it fails)
>
> -------------------------------------------------------------------
>
>
> acl.c:85: error: conflicting types for 'acl_get'
> /usr/include/sys/access.h:86: error: previous declaration of
> 'acl_get' was here
> make: 1254-004 The error code from the last command is 1.
>
>
> Stop.
> make: 1254-004 The error code from the last command is 2.
>
>
> Stop.
> make: 1254-004 The error code from the last command is 2.
>
>
> Stop.
>
>
> Please help with this issue.
>
> Thanks.
>
>
>
> DISCLAIMER:
> This message contains privileged and confidential information and is
> intended only for an individual named. If you are not the intended
> recipient, you should not disseminate, distribute, store, print,
> copy or deliver this message. Please notify the sender immediately
> by e-mail if you have received this e-mail by mistake and delete
> this e-mail from your system. E-mail transmission cannot be
> guaranteed to be secure or error-free as information could be
> intercepted, corrupted, lost, destroyed, arrive late or incomplete
> or contain viruses. The sender, therefore, does not accept liability
> for any errors or omissions in the contents of this message which
> arise as a result of e-mail transmission. If verification is
> required, please request a hard-copy version.
>
13 years, 11 months
RE: (ITS#6173) Error while making
by Bipin.Nair＠iflexsolutions.com
This is a multi-part message in MIME format.
------_=_NextPart_001_01C9EFB5.22156E9E
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Thanks.
Do you think that the OpenSSL and Berkley DB version also should change =
when I go with a upgraded OpenLDAP version?
=20
Also,is it mandatory to have Cyrus sasl also installed prior to =
OpenLDAP?
=20
=20
________________________________
From: mkassawara(a)gmail.com on behalf of Matt Kassawara
Sent: Wed 6/17/2009 09:30
To: Bipin Nair-SJR
Cc: openldap-its(a)openldap.org
Subject: Re: (ITS#6173) Error while making
You are using a deprecated version of OpenLDAP. Consider upgrading to a =
recent version... preferrably 2.4.
On Wed, Jun 17, 2009 at 4:42 AM, <bipin.nair(a)iflexsolutions.com> wrote:
Full_Name: Bipin
Version: OpenLDAP2.2.29
OS: AIX 5.3
URL: ftp://ftp.openldap.org/incoming/
Submission from: (NULL) (203.127.116.93)
=09
=09
Hi,
=09
While trying to install OpenLDAP 2.2.29 ,I getting the following error =
during
the 'make' step.
=09
=09
---------------------------------------------------------------------
Notes:-
=09
1)I have installed OpenSSL 0.9.7 and Berkley DB 4.5.20
=09
2)Also,the follwing variables are set
CPPFLAGS
LDFLAGS
LIBPATH
=09
3)THe follwoing commands were used as steps to install Openldap
cd openldap-2.2.29
./configure --enable-ldbm
make depend
make (During this step it fails)
=09
-------------------------------------------------------------------
=09
=09
acl.c:85: error: conflicting types for 'acl_get'
/usr/include/sys/access.h:86: error: previous declaration of 'acl_get' =
was here
make: 1254-004 The error code from the last command is 1.
=09
=09
Stop.
make: 1254-004 The error code from the last command is 2.
=09
=09
Stop.
make: 1254-004 The error code from the last command is 2.
=09
=09
Stop.
=09
=09
Please help with this issue.
=09
Thanks.
=09
=09
DISCLAIMER:
This message contains privileged and confidential information and is =
intended only for an individual named. If you are not the intended =
recipient, you should not disseminate, distribute, store, print, copy or =
deliver this message. Please notify the sender immediately by e-mail if =
you have received this e-mail by mistake and delete this e-mail from =
your system. E-mail transmission cannot be guaranteed to be secure or =
error-free as information could be intercepted, corrupted, lost, =
destroyed, arrive late or incomplete or contain viruses. The sender, =
therefore, does not accept liability for any errors or omissions in the =
contents of this message which arise as a result of e-mail transmission. =
If verification is required, please request a hard-copy version.
------_=_NextPart_001_01C9EFB5.22156E9E
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<HTML dir=3Dltr><HEAD>=0A=
<META http-equiv=3DContent-Type content=3D"text/html; charset=3Dunicode">=0A=
<META content=3D"MSHTML 6.00.2900.3492" name=3DGENERATOR></HEAD>=0A=
<BODY>=0A=
<DIV id=3DidOWAReplyText64405 dir=3Dltr>=0A=
<DIV dir=3Dltr><FONT face=3D"Courier New" color=3D#000000 =
size=3D2>Thanks.</FONT></DIV>=0A=
<DIV dir=3Dltr><FONT face=3D"Courier New" size=3D2>Do you think that the =
OpenSSL and Berkley DB version also should change when I go with a =
upgraded OpenLDAP version?</FONT></DIV>=0A=
<DIV dir=3Dltr><FONT face=3D"Courier New" size=3D2></FONT> </DIV>=0A=
<DIV dir=3Dltr><FONT face=3D"Courier New" size=3D2>Also,is it mandatory =
to have Cyrus sasl also installed prior to OpenLDAP?</FONT></DIV>=0A=
<DIV dir=3Dltr><FONT face=3D"Courier New" size=3D2></FONT> </DIV>=0A=
<DIV dir=3Dltr><FONT face=3D"Courier New" =
size=3D2></FONT> </DIV></DIV>=0A=
<DIV dir=3Dltr><BR>=0A=
<HR tabIndex=3D-1>=0A=
<FONT face=3DTahoma size=3D2><B>From:</B> mkassawara(a)gmail.com on behalf =
of Matt Kassawara<BR><B>Sent:</B> Wed 6/17/2009 09:30<BR><B>To:</B> =
Bipin Nair-SJR<BR><B>Cc:</B> =
openldap-its(a)openldap.org<BR><B>Subject:</B> Re: (ITS#6173) Error while =
making<BR></FONT><BR></DIV>=0A=
<DIV>You are using a deprecated version of OpenLDAP. Consider =
upgrading to a recent version... preferrably 2.4.<BR><BR>=0A=
<DIV class=3Dgmail_quote>On Wed, Jun 17, 2009 at 4:42 AM, <SPAN =
dir=3Dltr><<A =
href=3D"mailto:bipin.nair@iflexsolutions.com">bipin.nair(a)iflexsolutions.c=
om</A>></SPAN> wrote:<BR>=0A=
<BLOCKQUOTE class=3Dgmail_quote style=3D"PADDING-LEFT: 1ex; MARGIN: 0px =
0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Full_Name: Bipin<BR>Version: =
OpenLDAP2.2.29<BR>OS: AIX 5.3<BR>URL: <A =
href=3D"ftp://ftp.openldap.org/incoming/" =
target=3D_blank>ftp://ftp.openldap.org/incoming/</A><BR>Submission from: =
(NULL) (203.127.116.93)<BR><BR><BR>Hi,<BR><BR>While trying to install =
OpenLDAP 2.2.29 ,I getting the following error during<BR>the 'make' =
step.<BR><BR><BR>--------------------------------------------------------=
-------------<BR>Notes:-<BR><BR>1)I have installed OpenSSL 0.9.7 and =
Berkley DB 4.5.20<BR><BR>2)Also,the follwing variables are =
set<BR>CPPFLAGS<BR>LDFLAGS<BR>LIBPATH<BR><BR>3)THe follwoing commands =
were used as steps to install Openldap<BR>cd =
openldap-2.2.29<BR>./configure --enable-ldbm<BR>make depend<BR>make =
(During this step it =
fails)<BR><BR>-----------------------------------------------------------=
--------<BR><BR><BR>acl.c:85: error: conflicting types for =
'acl_get'<BR>/usr/include/sys/access.h:86: error: previous declaration =
of 'acl_get' was here<BR>make: 1254-004 The error code from the last =
command is 1.<BR><BR><BR>Stop.<BR>make: 1254-004 The error code from the =
last command is 2.<BR><BR><BR>Stop.<BR>make: 1254-004 The error code =
from the last command is 2.<BR><BR><BR>Stop.<BR><BR><BR>Please help with =
this =
issue.<BR><BR>Thanks.<BR><BR></BLOCKQUOTE></DIV><BR></DIV><p></p><p>DISCL=
AIMER:<br>This message contains privileged and confidential information =
and is intended only for an individual named. If you are not the =
intended recipient, you should not disseminate, distribute, store, =
print, copy or deliver this message. Please notify the sender =
immediately by e-mail if you have received this e-mail by mistake and =
delete this e-mail from your system. E-mail transmission cannot be =
guaranteed to be secure or error-free as information could be =
intercepted, corrupted, lost, destroyed, arrive late or incomplete or =
contain viruses. The sender, therefore, does not accept liability for =
any errors or omissions in the contents of this message which arise as a =
result of e-mail transmission. If verification is required, please =
request a hard-copy version.</BODY></HTML>
------_=_NextPart_001_01C9EFB5.22156E9E--
13 years, 11 months
Re: (ITS#6176) cachesize vs dncachesize
by hyc＠symas.com
h.b.furuseth(a)usit.uio.no wrote:
> Full_Name: Hallvard B Furuseth
> Version: 2.4.16
> OS:
> URL: http://www.openldap.org/lists/openldap-software/200906/msg00021.html
> Submission from: (NULL) (129.240.6.233)
> Submitted by: hallvard
>
>
> The referred openldap-software message says:
>> From: Howard Chu<hyc(a)symas.com>
>>
>> dncachesize must always be>= cachesize
>
> This is not documented, neither in manpage nor admin guide.
>
> Also slapd should preferably catch attempts to set them wrong, and
> either adjust them or fail the change. That's so for many config
> options, but more important for interactions between options.
The details here are unimportant. Since entry cache items hang off of dncache
items, the only consequence of a "wrong" configuration here is that the entry
cache could only ever grow to the size of the dncache.
At any rate, the code has been patched to set dncachesize >= cachesize, and
the manpage updated correspondingly, but there's no critical problem without
this patch.
--
-- Howard Chu
CTO, Symas Corp. http://www.symas.com
Director, Highland Sun http://highlandsun.com/hyc/
Chief Architect, OpenLDAP http://www.openldap.org/project/
13 years, 11 months
(ITS#6176) cachesize vs dncachesize
by h.b.furuseth＠usit.uio.no
Full_Name: Hallvard B Furuseth
Version: 2.4.16
OS:
URL: http://www.openldap.org/lists/openldap-software/200906/msg00021.html
Submission from: (NULL) (129.240.6.233)
Submitted by: hallvard
The referred openldap-software message says:
> From: Howard Chu <hyc(a)symas.com>
>
> dncachesize must always be >= cachesize
This is not documented, neither in manpage nor admin guide.
Also slapd should preferably catch attempts to set them wrong, and
either adjust them or fail the change. That's so for many config
options, but more important for interactions between options.
If that's fixed by adjusting the input values, then cachesize
configuration can be simplified for users: Given cachesize,
calculate the recommended defaults for the other cache size
variables (idlcachesize, dncachesize, cachefree). Keep the
real variables used by the backend separate, copied/defaulted
from input variables that are set by cn=config and not defaulted.
13 years, 11 months
Re: (ITS#6175) Slapd crashes when using accesslog
by michael＠stroeder.com
openldap-bugs(a)gleim.com wrote:
> Full_Name: Ben Goldsbury
> Version: 2.4.11
> OS: Debian Lenny running under Xen
> URL: ftp://ftp.openldap.org/incoming/
> Submission from: (NULL) (209.208.68.3)
>
> Slapd dies whenever the accesslog is enabled with the following BT. Please let
> me know what additional information you might need. I am also in #openldap as
> bpgoldsb.
Does this also happen when running recent OpenLDAP release 2.4.16 built
from source?
Ciao, Michael.
13 years, 11 months
(ITS#6175) Slapd crashes when using accesslog
by openldap-bugs＠gleim.com
Full_Name: Ben Goldsbury
Version: 2.4.11
OS: Debian Lenny running under Xen
URL: ftp://ftp.openldap.org/incoming/
Submission from: (NULL) (209.208.68.3)
Slapd dies whenever the accesslog is enabled with the following BT. Please let
me know what additional information you might need. I am also in #openldap as
bpgoldsb.
#0 0x00002b4ae5a45552 in ber_dupbv_x () from /usr/lib/liblber-2.4.so.2
#1 0x0000000000439a2e in attr_valadd (a=0x8ac4f0, vals=0x48, nvals=0x0, nn=1)
at /home/devel/openldap/build-area/openldap-2.4.11/servers/slapd/attr.c:423
#2 0x00002b4aea39bf8d in accesslog_entry (op=0x407ffde0, rs=0x407fff50,
logop=<value optimized out>, op2=0x4067f1d0)
at /home/devel/openldap/build-area/openldap-2.4.11/servers/slapd/overlays/accesslog.c:1200
#3 0x00002b4aea39c40f in accesslog_response (op=0x407ffde0, rs=0x407fff50) at
/home/devel/openldap/build-area/openldap-2.4.11/servers/slapd/overlays/accesslog.c:1363
#4 0x00000000004907a8 in over_back_response (op=0x407ffde0, rs=0x407fff50) at
/home/devel/openldap/build-area/openldap-2.4.11/servers/slapd/backover.c:235
#5 0x00000000004402ef in slap_response_play (op=0x407ffde0, rs=0x407fff50) at
/home/devel/openldap/build-area/openldap-2.4.11/servers/slapd/result.c:307
#6 0x0000000000442e0d in send_ldap_response (op=0x87b7e0, rs=0x48) at
/home/devel/openldap/build-area/openldap-2.4.11/servers/slapd/result.c:381
#7 0x00000000004439ab in slap_send_ldap_result (op=0x407ffde0, rs=0x407fff50)
at /home/devel/openldap/build-area/openldap-2.4.11/servers/slapd/result.c:642
#8 0x00002b4ae9f5e3b3 in bdb_search (op=0x407ffde0, rs=0x407fff50) at
/home/devel/openldap/build-area/openldap-2.4.11/servers/slapd/back-bdb/search.c:928
#9 0x0000000000490a07 in overlay_op_walk (op=0x407ffde0, rs=0x407fff50,
which=op_search, oi=0x7f3100, on=0x0)
at /home/devel/openldap/build-area/openldap-2.4.11/servers/slapd/backover.c:646
#10 0x0000000000491473 in over_op_func (op=0x407ffde0, rs=0x2b4ae763ca50,
which=op_bind) at /home/devel/openldap/build-area/openldap-2.4.11/servers/slapd/backover.c:698
#11 0x00002b4aea1903f9 in syncprov_findcsn (op=<value optimized out>,
mode=<value optimized out>)
at /home/devel/openldap/build-area/openldap-2.4.11/servers/slapd/overlays/syncprov.c:704
#12 0x00002b4aea191a7e in syncprov_db_otask (ptr=0x87b7e0) at
/home/devel/openldap/build-area/openldap-2.4.11/servers/slapd/overlays/syncprov.c:2672
#13 0x00002b4ae70d8fc7 in start_thread () from /lib/libpthread.so.0
#14 0x00002b4ae73bd5ad in clone () from /lib/libc.so.6
#15 0x0000000000000000 in ?? ()
Relevant part of slapd.conf:
moduleload accesslog
overlay accesslog
logdb cn=log
logops all
# Scan the accesslog DB every day
# Purge entries older than 7 days
logpurge 07+00:00 01+00:00
database bdb
suffix cn=log
directory /var/lib/ldap/accesslog/
# Allow manager to read the Monitor information
access to dn.subtree="cn=log"
by dn.exact="cn=Manager,dc=example,dc=com" read
by * none
13 years, 11 months
Re: (ITS#6173) Error while making
by battery＠writeme.com
--001e680f175823722e046c8c2226
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
You are using a deprecated version of OpenLDAP. Consider upgrading to a
recent version... preferrably 2.4.
On Wed, Jun 17, 2009 at 4:42 AM, <bipin.nair(a)iflexsolutions.com> wrote:
> Full_Name: Bipin
> Version: OpenLDAP2.2.29
> OS: AIX 5.3
> URL: ftp://ftp.openldap.org/incoming/
> Submission from: (NULL) (203.127.116.93)
>
>
> Hi,
>
> While trying to install OpenLDAP 2.2.29 ,I getting the following error
> during
> the 'make' step.
>
>
> ---------------------------------------------------------------------
> Notes:-
>
> 1)I have installed OpenSSL 0.9.7 and Berkley DB 4.5.20
>
> 2)Also,the follwing variables are set
> CPPFLAGS
> LDFLAGS
> LIBPATH
>
> 3)THe follwoing commands were used as steps to install Openldap
> cd openldap-2.2.29
> ./configure --enable-ldbm
> make depend
> make (During this step it fails)
>
> -------------------------------------------------------------------
>
>
> acl.c:85: error: conflicting types for 'acl_get'
> /usr/include/sys/access.h:86: error: previous declaration of 'acl_get' was
> here
> make: 1254-004 The error code from the last command is 1.
>
>
> Stop.
> make: 1254-004 The error code from the last command is 2.
>
>
> Stop.
> make: 1254-004 The error code from the last command is 2.
>
>
> Stop.
>
>
> Please help with this issue.
>
> Thanks.
>
>
--001e680f175823722e046c8c2226
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
You are using a deprecated version of OpenLDAP. =A0Consider upgrading to a =
recent version... preferrably 2.4.<br><br><div class=3D"gmail_quote">On Wed=
, Jun 17, 2009 at 4:42 AM, <span dir=3D"ltr"><<a href=3D"mailto:bipin.n=
air(a)iflexsolutions.com">bipin.nair(a)iflexsolutions.com</a>></span> wrote:=
<br>
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p=
x #ccc solid;padding-left:1ex;">Full_Name: Bipin<br>
Version: OpenLDAP2.2.29<br>
OS: AIX 5.3<br>
URL: <a href=3D"ftp://ftp.openldap.org/incoming/" target=3D"_blank">ftp://f=
tp.openldap.org/incoming/</a><br>
Submission from: (NULL) (203.127.116.93)<br>
<br>
<br>
Hi,<br>
<br>
While trying to install OpenLDAP 2.2.29 ,I getting the following error duri=
ng<br>
the 'make' step.<br>
<br>
<br>
---------------------------------------------------------------------<br>
Notes:-<br>
<br>
1)I have installed OpenSSL 0.9.7 and Berkley DB 4.5.20<br>
<br>
2)Also,the follwing variables are set<br>
CPPFLAGS<br>
LDFLAGS<br>
LIBPATH<br>
<br>
3)THe follwoing commands were used as steps to install Openldap<br>
cd openldap-2.2.29<br>
./configure --enable-ldbm<br>
make depend<br>
make (During this step it fails)<br>
<br>
-------------------------------------------------------------------<br>
<br>
<br>
acl.c:85: error: conflicting types for 'acl_get'<br>
/usr/include/sys/access.h:86: error: previous declaration of 'acl_get&#=
39; was here<br>
make: 1254-004 The error code from the last command is 1.<br>
<br>
<br>
Stop.<br>
make: 1254-004 The error code from the last command is 2.<br>
<br>
<br>
Stop.<br>
make: 1254-004 The error code from the last command is 2.<br>
<br>
<br>
Stop.<br>
<br>
<br>
Please help with this issue.<br>
<br>
Thanks.<br>
<br>
</blockquote></div><br>
--001e680f175823722e046c8c2226--
13 years, 11 months
