openldap-bugs

openldap-bugs@openldap.org

1 participants
20960 discussions

Re: (ITS#5096) [enhancement] back-sql should provide a means to reload schema mapping runtime
by ando＠sys-net.it 24 Aug '07

24 Aug '07

ando(a)sys-net.it wrote: > This is a request enhancement for a means to reload schema mapping run-time, > without the need to stop slapd. The ideal candidate for this feature seems to > be back-monitor. ... of course, adding back-config support would probably allow to remove and add the database again, resulting in the expected behavior. p. Ing. Pierangelo Masarati OpenLDAP Core Team SysNet s.r.l. via Dossi, 8 - 27100 Pavia - ITALIA http://www.sys-net.it --------------------------------------- Office: +39 02 23998309 Mobile: +39 333 4963172 Email: pierangelo.masarati(a)sys-net.it ---------------------------------------

1 0

Re: (ITS#5077) syncrepl.add_cmp() infinite loop on swapped values
by hyc＠symas.com 23 Aug '07

23 Aug '07

Donn Cave wrote: > It looks easy enough to me to code up an order independent version that > will actually work. I would initialize adds[] and dels[] with old & new > berval pointers, iterate through dels[] and adds[] (nested), and clear > both on match. The code is easier to follow and empirically I see one > fewer matches in the cases I tested it on. But that's just a test of > the algorithm - I haven't sorted out what needs to be done at the end of > the function where mcur etc. are modified depending on i == j. The only way to do this right, without dying on an O(n^2) algorithm, is to sort both arrays first and then walk through them in order as the original code did. If you want to submit such a patch, please do. I don't have a lot of time to focus on this at the moment. -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

Re: (ITS#5104) OpenLDAP build breaks with SSL
by ando＠sys-net.it 23 Aug '07

23 Aug '07

Hallvard B Furuseth wrote: > ando(a)sys-net.it writes: >> Actually, things seem to work just fine. I erroneously built >> openssl-0.9.8e without shared, and in that case it doesn't work. > > What's wrong with building it without shared? The build instructions > doesn't say we need the shared variant. I screwed things up, because I was building on Opteron, and ld complained about some non-relocatable symbols in libssl.a. Probably it either didn't guess well at my system, or I missed something. So it was probably me. Explicitly adding LIBS=-ldl fixed configure, but not the build later on. But I think this is off-topic with respect to this ITS. p. Ing. Pierangelo Masarati OpenLDAP Core Team SysNet s.r.l. via Dossi, 8 - 27100 Pavia - ITALIA http://www.sys-net.it --------------------------------------- Office: +39 02 23998309 Mobile: +39 333 4963172 Email: pierangelo.masarati(a)sys-net.it ---------------------------------------

1 0

Re: (ITS#5104) OpenLDAP build breaks with SSL
by h.b.furuseth＠usit.uio.no 23 Aug '07

23 Aug '07

ando(a)sys-net.it writes: > Actually, things seem to work just fine. I erroneously built > openssl-0.9.8e without shared, and in that case it doesn't work. What's wrong with building it without shared? The build instructions doesn't say we need the shared variant. -- Hallvard

1 0

Re: (ITS#5104) OpenLDAP build breaks with SSL
by ando＠sys-net.it 23 Aug '07

23 Aug '07

PLEASE KEEP REPLIES IN COPY ON THE ITS! Richard Beckett wrote: > I built openssl with the shared option for the config script. I have the > LD_LIBRARY_PATH set to /usr/local/lib which is where I put the Berkeley > DB libraries. Do I need something else? > > Here is what I get from the"make" after having run "make depend": > > ./.libs/libldap.a(tls.o)(.text+0x593): In function `sb_tls_bio_read': > /usr/local/src/LDAP/openldap-2.3.38/libraries/libldap/tls.c:676: > undefined reference to `BIO_clear_flags' Those symbols (at least in openssl-9.8.0e) are defined in libcrypto. You don't show the linker command line that is failing, but I still believe your build environment is broken, since OpenLDAP explicitly links libcrypto along with libssl. p. Ing. Pierangelo Masarati OpenLDAP Core Team SysNet s.r.l. via Dossi, 8 - 27100 Pavia - ITALIA http://www.sys-net.it --------------------------------------- Office: +39 02 23998309 Mobile: +39 333 4963172 Email: pierangelo.masarati(a)sys-net.it ---------------------------------------

1 0

Re: (ITS#5104) OpenLDAP build breaks with SSL
by ando＠sys-net.it 23 Aug '07

23 Aug '07

Please keep replies on the list Richard Beckett wrote: > Pierangelo, thank you very much for the reply. Can you suggest a > work-around for the time being? Do I need to edit the Makefile? I have > not worked at this level for many years and my knowledge of "make" is > rusty. Actually, things seem to work just fine. I erroneously built openssl-0.9.8e without shared, and in that case it doesn't work. I suspect your build environment is broken (possibly the way you built openssl?). Please check if it's built correctly; if it is, please inspect the config.log resulting from building OpenLDAP to get some hint about the reason of the failure. p. Ing. Pierangelo Masarati OpenLDAP Core Team SysNet s.r.l. via Dossi, 8 - 27100 Pavia - ITALIA http://www.sys-net.it --------------------------------------- Office: +39 02 23998309 Mobile: +39 333 4963172 Email: pierangelo.masarati(a)sys-net.it ---------------------------------------

1 0

Re: (ITS#5104) OpenLDAP build breaks with SSL
by ando＠sys-net.it 23 Aug '07

23 Aug '07

rbeckett(a)exelixis.com wrote: > Full_Name: Richard Beckett > Version: openldap-2.3.38 > OS: Solaris 10/RHEL v4 > URL: ftp://ftp.openldap.org/incoming/ > Submission from: (NULL) (65.209.203.254) > > > After compiling openssl-0.9.8e and installing it, then configuring > openldap-2.3.38 with ./configure followed by make depends and make, the make > fails. If I remove the /usr/local/lib/*ssl* and /usr/local/include/ssl* > directories and files then the make works fine. This occurs on both the Linux > and Solaris hosts It seems that linking a program with openssl needs to explicitly provide -ldl in LIBS. I'm investigating whether this is related to OpenLDAP's configure or related to libssl's build/installation. p. Ing. Pierangelo Masarati OpenLDAP Core Team SysNet s.r.l. via Dossi, 8 - 27100 Pavia - ITALIA http://www.sys-net.it --------------------------------------- Office: +39 02 23998309 Mobile: +39 333 4963172 Email: pierangelo.masarati(a)sys-net.it ---------------------------------------

1 0

(ITS#5104) OpenLDAP build breaks with SSL
by rbeckett＠exelixis.com 23 Aug '07

23 Aug '07

Full_Name: Richard Beckett Version: openldap-2.3.38 OS: Solaris 10/RHEL v4 URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (65.209.203.254) After compiling openssl-0.9.8e and installing it, then configuring openldap-2.3.38 with ./configure followed by make depends and make, the make fails. If I remove the /usr/local/lib/*ssl* and /usr/local/include/ssl* directories and files then the make works fine. This occurs on both the Linux and Solaris hosts

1 0

(ITS#5103) ldap_create_passwordpolicy_control creates illegal pp request control
by kurt＠OpenLDAP.org 22 Aug '07

22 Aug '07

Full_Name: Kurt Zeilenga Version: HEAD OS: Mac OS X 10.4.10 URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (24.180.46.200) Submitted by: kurt Fixed in HEAD libraries/libldap/ppolicy.c 1.14,1.15 libraries/libldap/controls.c 1.53,1.55

3 4

Re: (ITS#5102) back-perl build issues
by ando＠sys-net.it 22 Aug '07

22 Aug '07

kurt(a)OpenLDAP.org wrote: > With perl v5.8.8 from macports (recently upgraded) Works fine here (Linux) > Entering directory `/Users/kurt/Work/devel/servers/slapd/back-perl' > /bin/sh ../../..//libtool --tag=disable-shared --mode=compile cc -g -O2 > -I../../../include -I../../../include -I.. -I./.. -I/opt/local/include > -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe > -Wdeclaration-after-statement -I/opt/local/include > -I/opt/local/lib/perl5/5.8.8/darwin-2level/CORE -I/usr/pkg/include > -I/usr/pkg/include/db45 -c init.c > cc -g -O2 -I../../../include -I../../../include -I.. -I./.. > -I/opt/local/include -fno-common -DPERL_DARWIN -no-cpp-precomp > -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/opt/local/include > -I/opt/local/lib/perl5/5.8.8/darwin-2level/CORE -I/usr/pkg/include > -I/usr/pkg/include/db45 -c init.c -o init.o > init.c:90: error: parse error before 'ConfigReply' > init.c: In function 'perl_back_db_init': > init.c:92: error: number of arguments doesn't match prototype > proto-perl.h:27: error: prototype declaration This was recently (sort of: 2 weeks ago) changed. Are you sure you updated? p. Ing. Pierangelo Masarati OpenLDAP Core Team SysNet s.r.l. via Dossi, 8 - 27100 Pavia - ITALIA http://www.sys-net.it --------------------------------------- Office: +39 02 23998309 Mobile: +39 333 4963172 Email: pierangelo.masarati(a)sys-net.it ---------------------------------------

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openldap-bugs