openldap-bugs September 2023

openldap-bugs@openldap.org

1 participants
124 discussions

[Issue 10026] New: Refresh handling can skip entries (si_dirty not managed properly)
by openldap-its＠openldap.org 16 Dec '25

16 Dec '25

https://bugs.openldap.org/show_bug.cgi?id=10026 Issue ID: 10026 Summary: Refresh handling can skip entries (si_dirty not managed properly) Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: overlays Assignee: bugs(a)openldap.org Reporter: ondra(a)mistotebe.net Target Milestone: --- Take MPR plain syncrepl with 3+ providers. When a provider's own syncrepl session transitions to persist and a it starts a new parallel session towards another host, that session always has to start as a refresh. If that refresh serves entries to us, our handling of si_dirty is not consistent: - if the existing persist session serves some of these entries to us, we can "forget" to pass the others to a newly connected consumer - same if the refresh is abandoned and we start refreshing from a different provider that might be behind what we were being served (again our consumers could suffer) - if we restart, si_dirty is forgotten and our consumers suffer even worse We might need to be told (at the beginning of the refresh?) what the end state we're going for is, so we can keep si_dirty on until then. And somehow persist that knowledge in the DB... -- You are receiving this mail because: You are on the CC list for the issue.

1 19

[Issue 9577] New: slapd -V should be deprecated
by openldap-its＠openldap.org 15 Dec '25

15 Dec '25

https://bugs.openldap.org/show_bug.cgi?id=9577 Issue ID: 9577 Summary: slapd -V should be deprecated Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: smckinney(a)symas.com Target Milestone: --- Sometimes a user's (present one included) ignorance gets them in trouble unnecessarily. The -V option is an example... Normally, when one wants to determine the version of a process, they use -V, or perhaps -v. With slapd, the daemon actually continues to run, which can have negative consequences. The doc clearly states that -VV is probably what the user wants, but is counter-intutive. Who RTFM's before checking the version? -V print version info (-VV exit afterwards, -VVV print info about static overlays and backends) I propose we eliminate the option to allow slapd to continue running after displaying the version. Perhaps we eliminate the -V option entirely, or just make it work the same as -VV. -- You are receiving this mail because: You are on the CC list for the issue.

1 8

[Issue 9640] New: ACL privilege for MOD_INCREMENT
by openldap-its＠openldap.org 15 Dec '25

15 Dec '25

https://bugs.openldap.org/show_bug.cgi?id=9640 Issue ID: 9640 Summary: ACL privilege for MOD_INCREMENT Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: michael(a)stroeder.com Target Milestone: --- I'm using LDAP write operations with MOD_INCREMENT with pre-read-control for uidNumber/gidNumber generation. I'd like to limit write access to an Integer attribute "nextID" to MOD_INCREMENT, ideally even restricting the de-/increment value. (Uniqueness is achieved with slapo-unique anyway but still I'd like to avoid users messing with this attribute). IMHO the ideal solution would be a new privilege "i". Example for limiting write access to increment by one and grant read access for using read control: access to attrs=nextID val=1 by group=... =ri Example for decrementing by two without read: access to attrs=nextID val=-2 by group=... =i -- You are receiving this mail because: You are on the CC list for the issue.

1 5

[Issue 9305] New: ldap_connect_to_host: Return code from getaddrinfo() discarded, troubleshooting difficult
by openldap-its＠openldap.org 15 Dec '25

15 Dec '25

https://bugs.openldap.org/show_bug.cgi?id=9305 Issue ID: 9305 Summary: ldap_connect_to_host: Return code from getaddrinfo() discarded, troubleshooting difficult Product: OpenLDAP Version: 2.4.46 Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: client tools Assignee: bugs(a)openldap.org Reporter: minfrin(a)sharp.fm Target Milestone: --- When the ldap_connect_to_host() function sees a failure from getaddrinfo(), the meaningless return code -1 is returned. This makes troubleshooting difficult on a webserver, where the low level printf debugging is not practical. (gdb) step ldap_connect_to_host (ld=ld@entry=0x7fffc4002e10, sb=0x7fffc400b240, proto=1, srv=srv@entry=0x7fffc400b2f0, async=async@entry=0) at os-ip.c:543 543 { (gdb) next 546 ber_socket_t s = AC_SOCKET_INVALID; (gdb) 562 if ( srv->lud_host == NULL || *srv->lud_host == 0 ) { (gdb) 568 port = srv->lud_port; (gdb) 570 if( !port ) { (gdb) 578 switch(proto) { (gdb) 580 osip_debug( ld, (gdb) warning: Source file is more recent than executable. 71 return __builtin___memset_chk (__dest, __ch, __len, __bos0 (__dest)); (gdb) 598 hints.ai_flags = AI_ADDRCONFIG; (gdb) 601 hints.ai_socktype = socktype; (gdb) 602 snprintf(serv, sizeof serv, "%d", port ); (gdb) 605 LDAP_MUTEX_LOCK(&ldap_int_resolv_mutex); (gdb) 607 err = getaddrinfo( host, serv, &hints, &res ); (gdb) 609 LDAP_MUTEX_UNLOCK(&ldap_int_resolv_mutex); (gdb) 611 if ( err != 0 ) { (gdb) 612 osip_debug(ld, "ldap_connect_to_host: getaddrinfo failed: %s\n", (gdb) print host $3 = <optimized out> (gdb) print serv $4 = "636\000\000\000" (gdb) next 614 return -1; (gdb) The ldap_connect_to_host() function needs to return proper error codes. -- You are receiving this mail because: You are on the CC list for the issue.

1 7

[Issue 9936] New: slapd attempting free on address which was not malloced
by openldap-its＠openldap.org 12 Dec '25

12 Dec '25

https://bugs.openldap.org/show_bug.cgi?id=9936 Issue ID: 9936 Summary: slapd attempting free on address which was not malloced Product: OpenLDAP Version: 2.6.3 Hardware: x86_64 OS: Linux Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: kimjuhi96(a)snu.ac.kr Target Milestone: --- I get invalid free running this on the latest openldap from git, built with CFLAGS="-fsanitize=address" using clang 15. Seems this is similar to https://bugs.openldap.org/show_bug.cgi?id=9912. ./servers/slapd/slapd -T c -s1 -s1 Stopped reason: SIGABRT __GI_raise (sig=sig@entry=0x6) at ../sysdeps/unix/sysv/linux/raise.c:50 50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory. gdb-peda$ bt #0 __GI_raise (sig=sig@entry=0x6) at ../sysdeps/unix/sysv/linux/raise.c:50 #1 0x00007ffff78ca859 in __GI_abort () at abort.c:79 #2 0x00005555556eb04f in __sanitizer::Abort () at /home/juhee/project/foxfuzz/llvm-project/compiler-rt/lib/sanitizer_common/sanitizer_posix_libcdep.cpp:143 #3 0x00005555556e8aac in __sanitizer::Die () at /home/juhee/project/foxfuzz/llvm-project/compiler-rt/lib/sanitizer_common/sanitizer_termination.cpp:58 #4 0x00005555556c5dda in __asan::ScopedInErrorReport::~ScopedInErrorReport (this=0x7fffffffbe7e, __in_chrg=<optimized out>) at /home/juhee/project/foxfuzz/llvm-project/compiler-rt/lib/asan/asan_report.cpp:192 #5 0x00005555556c72b8 in __asan::ReportFreeNotMalloced (addr=<optimized out>, free_stack=0x7fffffffca90) at /home/juhee/project/foxfuzz/llvm-project/compiler-rt/lib/asan/asan_report.cpp:199 #6 0x00005555556c02ab in __interceptor_free (ptr=0x7fffffffe359) at /home/juhee/project/foxfuzz/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:53 #7 0x0000555555d3efe2 in ber_memfree_x () #8 0x0000555555847d33 in ch_free () #9 0x0000555555a31178 in slap_tool_init () #10 0x0000555555a2e54d in slapcat () #11 0x000055555570901f in main () #12 0x00007ffff78cc083 in __libc_start_main (main=0x555555706ef0 <main>, argc=0x5, argv=0x7fffffffdfc8, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffdfb8) at ../csu/libc-start.c:308 #13 0x000055555561011e in _start () at /home/juhee/project/foxfuzz/llvm-project/compiler-rt/lib/sanitizer_common/sanitizer_internal_defs.h:397 gdb-peda$ -- You are receiving this mail because: You are on the CC list for the issue.

1 8

[Issue 9816] New: slapcat cordeumps during mdb subtree dump with -s
by openldap-its＠openldap.org 12 Dec '25

12 Dec '25

https://bugs.openldap.org/show_bug.cgi?id=9816 Issue ID: 9816 Summary: slapcat cordeumps during mdb subtree dump with -s Product: OpenLDAP Version: 2.5.11 Hardware: x86_64 OS: Linux Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: khoffmann(a)united-internet.de Target Milestone: --- Created attachment 887 --> https://bugs.openldap.org/attachment.cgi?id=887&action=edit gdb backtrace of slapcat run When trying to use slapcat in combination with -b and -s in order to create a LDIF backup of a mdb subtree, slapd crashes with a coredump (please see the attached snippet with gdb output from a reproduced test tree). The problem was reporducible with different mdb databases / suffixes and only appears with option -s. The same dump with -H 'ldap:///ou=users,o=company,c=de??sub?' instead of -s ou=users,o=company,c=de works perfectly fine, as long as the "attrs part" is empty in the ldap-uri. Also using slapcat with -b only (for a full database dump) works fine as well. I'm aware of the fact that -s option is marked as DEPRECATED - I'm not sure if you are going to fix this bug or if you rather take the change to remove the option completely from future major versions. Please let me also know if it's expected behaviour that the -H option doesn't work whenever the attribute part isn't empty and if I should contribute to a documentation update for this edge case. Best regards, Kris -- You are receiving this mail because: You are on the CC list for the issue.

1 5

[Issue 10100] New: Non-sequential timestamps being logged on Windows
by openldap-its＠openldap.org 09 Dec '25

09 Dec '25

https://bugs.openldap.org/show_bug.cgi?id=10100 Issue ID: 10100 Summary: Non-sequential timestamps being logged on Windows Product: OpenLDAP Version: 2.6.6 Hardware: x86_64 OS: Windows Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: smckinney(a)symas.com Target Milestone: --- Presents as a dsync during replication. Consumer will log ``` 650af021.2eadd901 0000000000001b40 slap_queue_csn: queueing 0000000002ac1620 20230920131409.992477Z#000000#001#000000 650af021.2eaed239 0000000000001b40 slap_graduate_commit_csn: removing 0000000002ac1620 20230920131409.992477Z#000000#001#000000 650af021.317b2a35 000000000000185c do_syncrep2: rid=102 CSN too old, ignoring 20230920131409.040136Z#000000#001#000000 (uid=slapd-test1-FOO1-6,ou=People,dc=example,dc=com) ``` The entry was not be added. The provider will log messages using non-sequential timestamps. For example, when grepping the CSN from above (in provider log): ``` # This: 650af021.3b3060d9 0000000000001ad8 conn=1001 op=1 syncprov_sendresp: to=002, cookie=rid=102,sid=001,csn=20230920131409.992477Z#000000#001#000000 # and: 650af021.02648749 0000000000001810 slap_get_csn: conn=1003 op=7 generated new csn=20230920131409.040136Z#000000#001#000000 manage=1 ``` -- You are receiving this mail because: You are on the CC list for the issue.

1 8

[Issue 10086] New: test059 does not set up valid cn=config replication
by openldap-its＠openldap.org 09 Dec '25

09 Dec '25

https://bugs.openldap.org/show_bug.cgi?id=10086 Issue ID: 10086 Summary: test059 does not set up valid cn=config replication Product: OpenLDAP Version: 2.6.4 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: test suite Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- For cn=config replication to be valid, the entryUUIDs must match throughout the config database. However, this is not the case when test059 executes. The entryUUID for 'dn: cn=config' differs between the two. Example: quanah@apito1:~/git/quanah/openldap-scratch/tests/testrun$ grep entryUUID: cfcon.d/cn\=config.ldif entryUUID: aea058c4-bf6e-103d-9e18-4582986e9372 quanah@apito1:~/git/quanah/openldap-scratch/tests/testrun$ grep entryUUID: db.1.a/cn\=config\,cn\=consumer.ldif entryUUID: ae9bd858-bf6e-103d-871e-5daccf782d22 -- You are receiving this mail because: You are on the CC list for the issue.

1 3

[Bug 9224] New: Add support for PREPARE/2-phase commit
by openldap-its＠openldap.org 08 Dec '25

08 Dec '25

https://bugs.openldap.org/show_bug.cgi?id=9224 Bug ID: 9224 Summary: Add support for PREPARE/2-phase commit Product: LMDB Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: liblmdb Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- In LMDB, add support for PREPARE/2-phase commits -- You are receiving this mail because: You are on the CC list for the bug.

1 3

[Issue 9584] New: cn=config replication ops/refresh should pause server
by openldap-its＠openldap.org 08 Dec '25

08 Dec '25

https://bugs.openldap.org/show_bug.cgi?id=9584 Issue ID: 9584 Summary: cn=config replication ops/refresh should pause server Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: ondra(a)mistotebe.net Target Milestone: --- Looking into this crash: https://git.openldap.org/openldap/openldap/-/jobs/7286 The thread in question is running a plain syncrepl refresh while another thread seems to have done the same. This thread fetched the entryUUID attribute of the 'cn=config' entry as 'a' and in the meantime, that entry has been rewritten, with 'a' presumably cleaned up and returned to the pool, so addressing a->a_nvals[0] is a NULL-dereference now. This might or might not be related to the fix in ITS#8102. -- You are receiving this mail because: You are on the CC list for the issue.

1 19

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openldap-bugs September 2023