https://bugs.openldap.org/show_bug.cgi?id=9218
Bug ID: 9218
Summary: Revist entry_release handling in slapo-pache,
slapo-translucent
Product: OpenLDAP
Version: 2.5
Hardware: All
OS: All
Status: UNCONFIRMED
Severity: normal
Priority: ---
Component: overlays
Assignee: bugs(a)openldap.org
Reporter: quanah(a)openldap.org
Target Milestone: ---
From a past discussion with hyc on 2.5 items:
[13:57] <hyc> there's a nagging problem though, pcache's entry_release function
needs to distinguish between its backend actually freeing the entry, or being a
no-op
[13:57] <hyc> so it can decide whether to return success or continue
[13:58] <hyc> the patch to translucent sidesteps the question, by avoiding
other overlays
[13:58] <hyc> but we need to revisit this in 2.5
--
You are receiving this mail because:
You are on the CC list for the bug.
https://bugs.openldap.org/show_bug.cgi?id=9217
Bug ID: 9217
Summary: Audit all schema definitions to have official
non-experimental OIDs where possible
Product: OpenLDAP
Version: 2.5
Hardware: All
OS: All
Status: UNCONFIRMED
Severity: normal
Priority: ---
Component: slapd
Assignee: bugs(a)openldap.org
Reporter: quanah(a)openldap.org
Target Milestone: ---
From a past discussion with hyc on 2.5 requirements:
[09:27] <hyc> we also need to audit all of these schema defs
[09:27] <hyc> we're supposed to have official, non-experimental OIDs for
released schema
[09:28] <hyc> accesslog is still using 666, experimental arc
[09:29] <hyc> I think this means we should polish up the logschema draft,
Informational status, and publish it again as final
--
You are receiving this mail because:
You are on the CC list for the bug.
https://bugs.openldap.org/show_bug.cgi?id=9216
Bug ID: 9216
Summary: Port autoca to gnutls
Product: OpenLDAP
Version: 2.5
Hardware: All
OS: All
Status: UNCONFIRMED
Severity: normal
Priority: ---
Component: overlays
Assignee: bugs(a)openldap.org
Reporter: ryan(a)openldap.org
Target Milestone: ---
For 2.5, support building and running the autoca overlay with GnuTLS.
--
You are receiving this mail because:
You are on the CC list for the bug.
https://bugs.openldap.org/show_bug.cgi?id=9204
Bug ID: 9204
Summary: slapo-constraint allows anyone to apply Relax control
Product: OpenLDAP
Version: 2.4.49
Hardware: All
OS: All
Status: UNCONFIRMED
Severity: normal
Priority: ---
Component: overlays
Assignee: bugs(a)openldap.org
Reporter: ryan(a)openldap.org
Target Milestone: ---
slapo-constraint doesn't limit who can use the Relax control, beyond the global
limits applied by slapd. In practice, for many modifications this means any
configured constraints are advisory only.
In my opinion this should be considered a bug, in design if not implementation.
I expect many admins would not read the man page closely enough to realize the
behaviour does technically adhere to the letter of what's written there.
Either slapd should require manage privileges for the Relax control globally,
or slapo-constraint should perform a check for manage privilege itself, like
slapo-unique does.
Quoting ando in https://bugs.openldap.org/show_bug.cgi?id=5705#c4:
> Well, a user with "manage" privileges on related data could bypass
> constraints enforced by slapo-constraint(5) by using the "relax"
> control. The rationale is that a user with manage privileges could be
> able to repair an entry that needs to violate a constraint for good
> reasons. Note that the user:
>
> - must have enough privileges to do it (manage)
>
> - must inform the DSA that intends to violate the constraint (by using
> the control)
but such privileges are currently not being required.
--
You are receiving this mail because:
You are on the CC list for the bug.
https://bugs.openldap.org/show_bug.cgi?id=9278
Issue ID: 9278
Summary: liblmdb: robust mutexes should not be unmapped
Product: LMDB
Version: unspecified
Hardware: All
OS: FreeBSD
Status: UNCONFIRMED
Severity: normal
Priority: ---
Component: liblmdb
Assignee: bugs(a)openldap.org
Reporter: delphij(a)freebsd.org
Target Milestone: ---
Created attachment 736
--> https://bugs.openldap.org/attachment.cgi?id=736&action=edit
A possible workaround
We recently noticed that lmdb would have the memory region containing the
robust mutex unmapped on mdb_env_close0():
munmap((void *)env->me_txns,
(env->me_maxreaders-1)*sizeof(MDB_reader)+sizeof(MDB_txninfo));
Note that if this is the last unmap for a robust mutex, the FreeBSD
implementation would garbage-collect the mutex, making it no longer visible to
other processes. As the result, a second instance of the attached test.c (from
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=244493 with minor changes)
would trigger the assertion at mdb_txn_begin() because the acquisition of the
mutex would return 22 (EINVAL), because the mutex appeared to be a robust
mutex, but was invalid.
The attached lmdb.diff is a possible workaround for this (it would skip
unmapping when setting up the robust mutex for the first time).
--
You are receiving this mail because:
You are on the CC list for the issue.
https://bugs.openldap.org/show_bug.cgi?id=9343
Issue ID: 9343
Summary: Expand ppolicy policy configuration to allow URL
filter
Product: OpenLDAP
Version: 2.5
Hardware: All
OS: All
Status: UNCONFIRMED
Severity: normal
Priority: ---
Component: overlays
Assignee: bugs(a)openldap.org
Reporter: quanah(a)openldap.org
Target Milestone: ---
Currently, ppolicy only supports a single global default policy, and past that
any policies must be manually added to a given user entry if they are supposed
to have something other than the default policy.
Also, some sites want no default policy, and only a specific subset to have a
policy applied to them.
For both of these cases, it would be helpful if it were possible to configure a
policy to apply to a set of users via a URL similar to the way we handle
creating groups of users in dynlist
--
You are receiving this mail because:
You are on the CC list for the issue.
https://bugs.openldap.org/show_bug.cgi?id=9358
Issue ID: 9358
Summary: back-mdb may return accesslog entries out of order
Product: OpenLDAP
Version: 2.4.53
Hardware: All
OS: All
Status: UNCONFIRMED
Severity: normal
Priority: ---
Component: overlays
Assignee: bugs(a)openldap.org
Reporter: hyc(a)openldap.org
Target Milestone: ---
back-mdb will usually return search entries in entryID order, but may do a dn
traversal instead if the count of children is smaller than the count of search
filter candidates. The RDNs are sorted in length order, not lexical order. For
accesslog, all RDNs are of equal length but if they have trailing zeroes, the
generalizedTime normalizer truncates them. Changing their lengths causes
accesslog's timestamp-based RDNs to sort in the wrong order.
The least intrusive fix is to override the syntax/normalizer for reqStart and
reqEnd attributes to not truncate trailing zeroes.
--
You are receiving this mail because:
You are on the CC list for the issue.
https://bugs.openldap.org/show_bug.cgi?id=9256
Bug ID: 9256
Summary: The ACLs required for SASL binding are not fully
documented
Product: OpenLDAP
Version: 2.5
Hardware: All
OS: All
Status: UNCONFIRMED
Severity: normal
Priority: ---
Component: documentation
Assignee: bugs(a)openldap.org
Reporter: kop(a)karlpinc.com
Target Milestone: ---
Created attachment 727
--> https://bugs.openldap.org/attachment.cgi?id=727&action=edit
Patch massaging the SASL binding requirement docs
While some ACL requirements for SASL binding are documented, some are not.
E.g, that olcAuthzRegexp requires =x on objectClass when direct DN mapping is
not documented. Other requirements can be reasoned out based on the existing
documentation, but this can be very difficult when unfamiliar with all the
moving parts and the places they are documented. E.g. knowing that
(objectClass=*) is the default filter, and that there's _always_ _some_ filter,
and connecting this with ACLs required to do search-based SASL mapping.
The attached patch brings all the SASL binding requirements together in one
place in the docs and makes everything explicit. The word "SASL" is included,
for those searching for that keyword.
I, Karl O. Pinc, hereby place the following modifications to OpenLDAP Software
(and only these modifications) into the public domain. Hence, these
modifications may be freely used and/or redistributed for any purpose with or
without attribution and/or other notice.
--
You are receiving this mail because:
You are on the CC list for the bug.
https://bugs.openldap.org/show_bug.cgi?id=9189
Bug ID: 9189
Summary: Add GSSAPI channel-bindings support
Product: OpenLDAP
Version: unspecified
Hardware: All
OS: All
Status: UNCONFIRMED
Severity: normal
Priority: ---
Component: libraries
Assignee: bugs(a)openldap.org
Reporter: iboukris(a)gmail.com
Target Milestone: ---
Recently MS has announce they plan to enforce channel-bindings for LDAP over
TLS (ADV190023).
To support it on client side, we need to pass "tls-endpoint" bindings (RFC
5929) to the SASL plugin, and make use of that in GSSAPI.
See also:
https://github.com/cyrusimap/cyrus-sasl/pull/601
--
You are receiving this mail because:
You are on the CC list for the bug.