openldap-bugs December 2023

openldap-bugs@openldap.org

1 participants
89 discussions

[Issue 9343] New: Expand ppolicy policy configuration to allow URL filter
by openldap-its＠openldap.org 17 Sep '24

17 Sep '24

https://bugs.openldap.org/show_bug.cgi?id=9343 Issue ID: 9343 Summary: Expand ppolicy policy configuration to allow URL filter Product: OpenLDAP Version: 2.5 Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: overlays Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- Currently, ppolicy only supports a single global default policy, and past that any policies must be manually added to a given user entry if they are supposed to have something other than the default policy. Also, some sites want no default policy, and only a specific subset to have a policy applied to them. For both of these cases, it would be helpful if it were possible to configure a policy to apply to a set of users via a URL similar to the way we handle creating groups of users in dynlist -- You are receiving this mail because: You are on the CC list for the issue.

1 14

[Issue 9652] New: Add "tee" capability to load balancer
by openldap-its＠openldap.org 17 Sep '24

17 Sep '24

https://bugs.openldap.org/show_bug.cgi?id=9652 Issue ID: 9652 Summary: Add "tee" capability to load balancer Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: lloadd Assignee: bugs(a)openldap.org Reporter: mhardin(a)symas.com Target Milestone: --- This is a request for an enhancement that would add a "tee" or "fan-out" capability to load balancer, where received operations are sent to two or more destinations simultaneously. The primary goal or the enhancement is to make it possible to keep multiple independent and likely dissimilar directory systems in lock-step with each other over hours, days, or possibly even weeks. The enhancement would not necessarily need to include a mechanism for converging the target systems should they become out of sync. This is not intended to be a replication solution, rather it is viewed more as a "copy" solution intended to be used for specific short-term tasks that need multiple directory systems to be exactly synchronized but where replication is not desirable or even possible. At least two uses come to mind: 1. Test harnesses, evaluating side-by-side operation of separate directory systems over time 2. Directory system transition validation harnesses 3. (maybe) Part of a test harness to record or replay LDAP workloads * Other uses? -- You are receiving this mail because: You are on the CC list for the issue.

1 7

[Issue 9667] New: 2.6 to 2.7 upgrade documentation
by openldap-its＠openldap.org 17 Sep '24

17 Sep '24

https://bugs.openldap.org/show_bug.cgi?id=9667 Issue ID: 9667 Summary: 2.6 to 2.7 upgrade documentation Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: documentation Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- Need to document any upgrade information for going from 2.6 to 2.7 -- You are receiving this mail because: You are on the CC list for the issue.

1 3

[Issue 9305] New: ldap_connect_to_host: Return code from getaddrinfo() discarded, troubleshooting difficult
by openldap-its＠openldap.org 10 Sep '24

10 Sep '24

https://bugs.openldap.org/show_bug.cgi?id=9305 Issue ID: 9305 Summary: ldap_connect_to_host: Return code from getaddrinfo() discarded, troubleshooting difficult Product: OpenLDAP Version: 2.4.46 Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: client tools Assignee: bugs(a)openldap.org Reporter: minfrin(a)sharp.fm Target Milestone: --- When the ldap_connect_to_host() function sees a failure from getaddrinfo(), the meaningless return code -1 is returned. This makes troubleshooting difficult on a webserver, where the low level printf debugging is not practical. (gdb) step ldap_connect_to_host (ld=ld@entry=0x7fffc4002e10, sb=0x7fffc400b240, proto=1, srv=srv@entry=0x7fffc400b2f0, async=async@entry=0) at os-ip.c:543 543 { (gdb) next 546 ber_socket_t s = AC_SOCKET_INVALID; (gdb) 562 if ( srv->lud_host == NULL || *srv->lud_host == 0 ) { (gdb) 568 port = srv->lud_port; (gdb) 570 if( !port ) { (gdb) 578 switch(proto) { (gdb) 580 osip_debug( ld, (gdb) warning: Source file is more recent than executable. 71 return __builtin___memset_chk (__dest, __ch, __len, __bos0 (__dest)); (gdb) 598 hints.ai_flags = AI_ADDRCONFIG; (gdb) 601 hints.ai_socktype = socktype; (gdb) 602 snprintf(serv, sizeof serv, "%d", port ); (gdb) 605 LDAP_MUTEX_LOCK(&ldap_int_resolv_mutex); (gdb) 607 err = getaddrinfo( host, serv, &hints, &res ); (gdb) 609 LDAP_MUTEX_UNLOCK(&ldap_int_resolv_mutex); (gdb) 611 if ( err != 0 ) { (gdb) 612 osip_debug(ld, "ldap_connect_to_host: getaddrinfo failed: %s\n", (gdb) print host $3 = <optimized out> (gdb) print serv $4 = "636\000\000\000" (gdb) next 614 return -1; (gdb) The ldap_connect_to_host() function needs to return proper error codes. -- You are receiving this mail because: You are on the CC list for the issue.

1 5

[Issue 9398] New: Stale accesslog cookie due to unclean shutdown
by openldap-its＠openldap.org 10 Sep '24

10 Sep '24

https://bugs.openldap.org/show_bug.cgi?id=9398 Issue ID: 9398 Summary: Stale accesslog cookie due to unclean shutdown Product: OpenLDAP Version: 2.4.56 Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- If slapd terminates uncleanly, a checkpoint will be lost on the accesslog db. Depending on the syncprov overlay checkpoint settings (usually no checkpointing is enabled on the accesslog db) this can cause the system to refuse engage in replication at startup. -- You are receiving this mail because: You are on the CC list for the issue.

1 8

[Bug 9225] New: back-mdb: Add support for PREPARE/2-phase commit
by openldap-its＠openldap.org 10 Sep '24

10 Sep '24

https://bugs.openldap.org/show_bug.cgi?id=9225 Bug ID: 9225 Summary: back-mdb: Add support for PREPARE/2-phase commit Product: OpenLDAP Version: 2.4.50 Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: backends Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- Add support for PREPARE/2-phase commit in back-mdb -- You are receiving this mail because: You are on the CC list for the bug.

1 9

[Bug 9186] New: RFE: More metrics in cn=monitor
by openldap-its＠openldap.org 10 Sep '24

10 Sep '24

https://bugs.openldap.org/show_bug.cgi?id=9186 Bug ID: 9186 Summary: RFE: More metrics in cn=monitor Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: backends Assignee: bugs(a)openldap.org Reporter: michael(a)stroeder.com Target Milestone: --- Currently I'm grepping metrics from syslog with mtail: https://gitlab.com/ae-dir/ansible-ae-dir-server/-/blob/master/templates/mta… With a new binary logging this is not possible anymore. Thus it would be nice if cn=monitor provides more metrics. 1. Overall connection count per listener starting at 0 when started. This would be a simple counter added to: entries cn=Listener 0,cn=Listeners,cn=Monitor 2. Counter for the various "deferring" messages separated by the reason for deferring. 3. Counters for all possible result codes. In my mtail program I also label it with the result type. -- You are receiving this mail because: You are on the CC list for the bug.

1 9

[Issue 10106] New: Add organization to web list of OpenLDAP support providers
by openldap-its＠openldap.org 28 Aug '24

28 Aug '24

https://bugs.openldap.org/show_bug.cgi?id=10106 Issue ID: 10106 Summary: Add organization to web list of OpenLDAP support providers Product: website Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: website Assignee: bugs(a)openldap.org Reporter: sudo(a)migrateq.io Target Milestone: --- Hello! This request is being opened as suggested by Quanah Gibson-Mount. Could you please add Migrateq to your OpenLDAP Support page on https://openldap.org/support Company: Migrateq Inc. Website: https://migrateq.io/support/tech/openldap Migrateq provides migrations, integrations and advanced 24/7/365 technical support for OpenLDAP and most Linux and Open Source Software. Thank you =) Richard -- You are receiving this mail because: You are on the CC list for the issue.

1 10

[Issue 9796] New: Deprecate GnuTLS support
by openldap-its＠openldap.org 20 Aug '24

20 Aug '24

https://bugs.openldap.org/show_bug.cgi?id=9796 Issue ID: 9796 Summary: Deprecate GnuTLS support Product: OpenLDAP Version: 2.6.1 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: libraries Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- Support for GnuTLS was added specifically for the Debian (and thus Ubuntu) due to the license objections at the time that the Debian project had for the OpenSSL license. Since that time, Debian has reclassified OpenSSL as a core library and the OpenSSL project has resolved the original complaint by licensing OpenSSL 3 and later under the Apache License v2. Thus there is no longer a reason to maintain support for GnuTLS and given the long standing concerns over the security and quality of the GnuTLS bridge in addition to the extra cost of maintaining that code, it should be marked as deprecated and removed in a future release. -- You are receiving this mail because: You are on the CC list for the issue.

1 3

[Issue 9827] New: Feature request for module argon2.so to support Argon2i, Argon2d, Argon2id
by openldap-its＠openldap.org 28 Jun '24

28 Jun '24

https://bugs.openldap.org/show_bug.cgi?id=9827 Issue ID: 9827 Summary: Feature request for module argon2.so to support Argon2i, Argon2d, Argon2id Product: OpenLDAP Version: 2.6.1 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: juergen.sprenger(a)swisscom.com Target Milestone: --- Hi, This is a feature request. I would like to be able to chooses between Argon2i, Argon2d and Argon2id in slappasswd like in argon2 command: # argon2 Usage: argon2 [-h] salt [-i|-d|-id] [-t iterations] [-m log2(memory in KiB) | -k memory in KiB] [-p parallelism] [-l hash length] [-e|-r] [-v (10|13)] Password is read from stdin Parameters: salt The salt to use, at least 8 characters -i Use Argon2i (this is the default) -d Use Argon2d instead of Argon2i -id Use Argon2id instead of Argon2i -t N Sets the number of iterations to N (default = 3) -m N Sets the memory usage of 2^N KiB (default 12) -k N Sets the memory usage of N KiB (default 4096) -p N Sets parallelism to N threads (default 1) -l N Sets hash output length to N bytes (default 32) -e Output only encoded hash -r Output only the raw bytes of the hash -v (10|13) Argon2 version (defaults to the most recent version, currently 13) -h Print argon2 usage Example: /usr/local/etc/openldap # /usr/sbin/slappasswd -h "{ARGON2}" -o module-load="argon2.so i" -s secret /usr/local/etc/openldap # /usr/sbin/slappasswd -h "{ARGON2}" -o module-load="argon2.so d" -s secret /usr/local/etc/openldap # /usr/sbin/slappasswd -h "{ARGON2}" -o module-load="argon2.so id" -s secret Best regards Juergen Sprenger -- You are receiving this mail because: You are on the CC list for the issue.

1 6

← Newer
1
2
3
4
5
6
7
8
9
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openldap-bugs December 2023