openldap-bugs May 2022

openldap-bugs@openldap.org

1 participants
136 discussions

[Issue 9524] New: Removing last entry in database triggers MDB_PROBLEM
by openldap-its＠openldap.org 21 Sep '22

21 Sep '22

https://bugs.openldap.org/show_bug.cgi?id=9524 Issue ID: 9524 Summary: Removing last entry in database triggers MDB_PROBLEM Product: LMDB Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: liblmdb Assignee: bugs(a)openldap.org Reporter: kriszyp(a)gmail.com Target Milestone: --- With a fresh database, if you have have an open read transaction, and you create a new entry in a write transaction and commit it, and then create a new transaction and delete that entry, when you commit, it will return an MDB_PROBLEM from approximately line 4408 from the mt_loose_count/dirty_list check. This seems to occur on mdb.master3, but not mdb.master. Here is a minimal example/test-case of how to reproduce: MDB_env* env; mdb_env_create(&env); int rc, flags = 0; mdb_env_open(env, "test", flags, 0664); MDB_txn* readonly_txn; mdb_txn_begin(env, nullptr, MDB_RDONLY, &readonly_txn); MDB_txn* txn; MDB_dbi dbi; mdb_txn_begin(env, nullptr, 0, &txn); mdb_dbi_open(txn, nullptr, MDB_CREATE, &dbi); MDB_val val; val.mv_data = (void*) "test"; val.mv_size = 4; mdb_put(txn, dbi, &val, &val, 0); mdb_txn_commit(txn); mdb_txn_begin(env, nullptr, 0, &txn); mdb_del(txn, dbi, &val, nullptr); rc = mdb_txn_commit(txn); // this returns MDB_PROBLEM (let me know if this should be submitted differently) -- You are receiving this mail because: You are on the CC list for the issue.

1 11

[Issue 9339] New: Add syncrepl status in cn=monitor
by openldap-its＠openldap.org 12 Sep '22

12 Sep '22

https://bugs.openldap.org/show_bug.cgi?id=9339 Issue ID: 9339 Summary: Add syncrepl status in cn=monitor Product: OpenLDAP Version: 2.5 Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: hyc(a)openldap.org Target Milestone: --- Patch coming to expose some consumer state in cn=monitor Sample entry: # Consumer 001, database 2, databases, monitor dn: cn=Consumer 001,cn=database 2,cn=databases,cn=monitor objectClass: olmSyncReplInstance structuralObjectClass: olmSyncReplInstance cn: Consumer 001 creatorsName: modifiersName: createTimestamp: 20200906160447Z modifyTimestamp: 20200906160447Z olmSRProviderURIList: ldap://localhost:9011/ olmSRIsConnected: TRUE olmSRSyncPhase: Persist olmSRLastConnect: 20200906160448Z olmSRLastContact: 20200906160453Z olmSRLastCookieRcvd: rid=001,sid=001,csn=20200906160453.039573Z#000000#001#000 000 olmSRLastCookieSent: rid=001,sid=002,csn=20200906160447.723677Z#000000#001#000 000 entryDN: cn=Consumer 001,cn=database 2,cn=databases,cn=monitor subschemaSubentry: cn=Subschema hasSubordinates: FALSE -- You are receiving this mail because: You are on the CC list for the issue.

1 9

[Issue 9853] New: lastbind-precision conversion fails from slapd.conf to cn=config
by openldap-its＠openldap.org 12 Sep '22

12 Sep '22

https://bugs.openldap.org/show_bug.cgi?id=9853 Issue ID: 9853 Summary: lastbind-precision conversion fails from slapd.conf to cn=config Product: OpenLDAP Version: 2.6.2 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- When converting a slapd.conf file to cn=config, the "lastbind-precision" value is not preserved. slapd.conf: lastbind-precision 300 cn=config value: olcLastBindPrecision: 0 -- You are receiving this mail because: You are on the CC list for the issue.

1 6

[Issue 9437] New: Add OTP module to core
by openldap-its＠openldap.org 12 Sep '22

12 Sep '22

https://bugs.openldap.org/show_bug.cgi?id=9437 Issue ID: 9437 Summary: Add OTP module to core Product: OpenLDAP Version: 2.5 Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: overlays Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- Symas will contribute its OTP module for OpenLDAP 2.5 as a core overlay -- You are receiving this mail because: You are on the CC list for the issue.

1 8

[Issue 9817] New: rwm overlay : Issue with DN containing special characters
by openldap-its＠openldap.org 12 Sep '22

12 Sep '22

https://bugs.openldap.org/show_bug.cgi?id=9817 Issue ID: 9817 Summary: rwm overlay : Issue with DN containing special characters Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: overlays Assignee: bugs(a)openldap.org Reporter: thierry.pubellier(a)paris.fr Target Milestone: --- Hi, I'm using rwn to select the database useg for bind operations based on the result of a rewriteMap requets. Sample configuration in global section : #Rewrite Map to request a remote server rwm-rewriteMap ldap checkEntry "ldap://10.1.2.3/ou=users,dc=paris,dc=local?dn?sub" binddn="cn=myuser,ou=users,dc=paris,dc=local" credentials="XXX" # Backing up original DN rwm-rewriteRule ".+" "${&binddn($0)}$0" ":" # Contructing LDAP Filter for remote search. Combined with a rewrite Map, the requested DN is returned if there is a match. rwm-rewriteRule ".+" "(&(!(description=TEST))(distinguishedName=$0))" ":" # If filter matches, end of rewriting. Going to 'dc=paris,dc=local' database rwm-rewriteRule ".+" "${checkIfPasswordExpiredDN($0)}" ":@I" # Otherwise, restoring the original DN. rwm-rewriteRule ".+" "${*binddn}" ":" # And final DN massaging from "dc=paris,dc=local" to "dc=paris,dc=local2" database rwm-rewriteRule "(.+,)?ou=users,dc=paris,dc=local$" "$1ou=users,dc=paris,dc=local2" ":@" Everything goes fine until I use DN with special characters, like ',' or '['. For example : 'cn=Pubellier\, Thierry (TEST),ou=users,dc=paris,dc=local' In this case, the rwm-rewriteRule contructs a LDAP filter with incorrect syntax, as special caracters are not being escaped. I have to use some ugly tricks to escape these caracters, as shown below : #Rewrite Map to request a remote server rwm-rewriteMap ldap checkEntry "ldap://10.1.2.3/ou=users,dc=paris,dc=local?dn?sub" binddn="cn=myuser,ou=users,dc=paris,dc=local" credentials="XXX" # Backing up original DN rwm-rewriteRule ".+" "${&binddn($0)}$0" ":" # Rewriting for ',' rwm-rewriteRule "(.+).\2C(.+)" "$1\\,$2" # Adding a special '#' (asserting it in none of my DNs) suffix for special characters, in order to escape them without looping forever rwm-rewriteRule "(.*)([)*(\\])([^#].*|$)" "$1$2#$3" # Escaping of special characters with dedicated '#' suffix, avoiding infinite loops rwm-rewriteRule "(.*)([)*(\\])#(.*)" "$1\\$2$3" # Contructing LDAP Filter for remote search. Combined with a rewrite Map, the requested DN is returned if there is a match. rwm-rewriteRule ".+" "(&(!(description=TEST))(distinguishedName=$0))" ":" # If filter matches, end of rewriting. Going to 'dc=paris,dc=local' database rwm-rewriteRule ".+" "${checkIfPasswordExpiredDN($0)}" ":@I" # Otherwise, restoring the original DN. rwm-rewriteRule ".+" "${*binddn}" ":" # And final DN massaging from "dc=paris,dc=local" to "dc=paris,dc=local2" database rwm-rewriteRule "(.+,)?ou=users,dc=paris,dc=local$" "$1ou=users,dc=paris,dc=local2" ":@" Could there be a way to integrate the ldap escape mechanism when making an variable assignment (like using a '#' character in place of the usual '&') ? Thanks by advance, Best regards, Thierry -- You are receiving this mail because: You are on the CC list for the issue.

1 21

[Issue 9438] New: Add remoteauth overlay to core
by openldap-its＠openldap.org 12 Sep '22

12 Sep '22

https://bugs.openldap.org/show_bug.cgi?id=9438 Issue ID: 9438 Summary: Add remoteauth overlay to core Product: OpenLDAP Version: 2.5 Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: overlays Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- Symas will contribute its remoteauth overlay for OpenLDAP 2.5 as a core overlay -- You are receiving this mail because: You are on the CC list for the issue.

1 12

[Issue 9358] New: back-mdb may return accesslog entries out of order
by openldap-its＠openldap.org 01 Sep '22

01 Sep '22

https://bugs.openldap.org/show_bug.cgi?id=9358 Issue ID: 9358 Summary: back-mdb may return accesslog entries out of order Product: OpenLDAP Version: 2.4.53 Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: overlays Assignee: bugs(a)openldap.org Reporter: hyc(a)openldap.org Target Milestone: --- back-mdb will usually return search entries in entryID order, but may do a dn traversal instead if the count of children is smaller than the count of search filter candidates. The RDNs are sorted in length order, not lexical order. For accesslog, all RDNs are of equal length but if they have trailing zeroes, the generalizedTime normalizer truncates them. Changing their lengths causes accesslog's timestamp-based RDNs to sort in the wrong order. The least intrusive fix is to override the syntax/normalizer for reqStart and reqEnd attributes to not truncate trailing zeroes. -- You are receiving this mail because: You are on the CC list for the issue.

1 6

[Issue 9516] New: Argon2 configuration parameters with slappasswd
by openldap-its＠openldap.org 23 Aug '22

23 Aug '22

https://bugs.openldap.org/show_bug.cgi?id=9516 Issue ID: 9516 Summary: Argon2 configuration parameters with slappasswd Product: OpenLDAP Version: 2.4.58 Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: gilbert.kowarzyk(a)servicenow.com Target Milestone: --- It is currently possible to generate an Argon2 hash using slappasswd as follows: slappasswd -h {ARGON2} -o module-load=pw-argon2 However, I believe that it is currently not possible to provide Argon2 configuration values for parameters "m", "t", and "p" when using slappasswd. If it is currently possible to provide these config parameters when using slappasswd, please add documentation for how to do so. Thanks in advance! -- You are receiving this mail because: You are on the CC list for the issue.

1 7

[Issue 9596] New: Python test suite
by openldap-its＠openldap.org 08 Aug '22

08 Aug '22

https://bugs.openldap.org/show_bug.cgi?id=9596 Issue ID: 9596 Summary: Python test suite Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: build Assignee: bugs(a)openldap.org Reporter: ondra(a)mistotebe.net Target Milestone: --- The bash test suite is extremely limited, hard to write for and slow. We can't lose it as it is also portable, but something should be introduced for developers/CI on more modern systems and increase coverage. A Python 3 seed for one is in development in MR!347. -- You are receiving this mail because: You are on the CC list for the issue.

1 7

[Issue 9849] New: Update website to support LTS and Feature releases
by openldap-its＠openldap.org 14 Jul '22

14 Jul '22

https://bugs.openldap.org/show_bug.cgi?id=9849 Issue ID: 9849 Summary: Update website to support LTS and Feature releases Product: website Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: website Assignee: bugs(a)openldap.org Reporter: mnormann(a)symas.com Target Milestone: --- Modify .wlmrc variable names and website content to handle both Feature Release and Long Term Support release. -- You are receiving this mail because: You are on the CC list for the issue.

1 4

← Newer
1
2
3
4
5
6
7
8
9
...
14
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openldap-bugs May 2022