--Boundary-00=_XqOPP0RBjyQeXED Content-Type: Text/Plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit
On Tuesday, 29 March 2011 17:25:10 you wrote:
Full_Name: Buchan Milne Version: 2.4.25 OS: Linux URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (196.25.124.16)
While the code in contrib is not supported, some overlays provide make files, some don't, and there were variations in a lot of the make files (e.g. use of DESTDIR or not).
In order to add make files for overlays that don't have them, improve the consistency of the make files between overlays that had them, and to provide some basic sanity testing in a 'test' target, I have created the patch at: http://svn.mandriva.com/cgi-bin/viewvc.cgi/packages/cooker/openldap/curren t/SOURCES/openldap-2.4.25-contrib-makefiles-with-tests.patch?revision=64874 4&view=markup
The patch is against 2.4.25, but should apply to master (except that there two additional overlays are present in master). Where feasible I have retained the majority of an existing make file, in other cases, where modifications would exceed the original content, I have replaced existing make files wholesale.
The attached patch file is derived from OpenLDAP Software. All of the modifications to OpenLDAP Software represented in the following patch(es) were developed by Buchan Milne (bgmilne@staff.telkomsa.net). I have not assigned rights and/or interest in this work to any party.
Attached is an updated patch against current master (since ftp.openldap.org/incoming is out of disk space).
Please let me know how we can get this patch merged.
Regards, Buchan
--Boundary-00=_XqOPP0RBjyQeXED Content-Type: text/x-patch; charset="UTF-8"; name="0001-Fix-contrib-Makefiles-to-use-libtool-and-be-consiste.patch" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="0001-Fix-contrib-Makefiles-to-use-libtool-and-be-consiste.patch"
=46rom 168ed0544cfd529c8bdff1e5366c1bc60477b1cb Mon Sep 17 00:00:00 2001 =46rom: Buchan Milne bgmilne@staff.telkomsa.net Date: Fri, 3 Jun 2011 10:18:39 +0200 Subject: [PATCH] Fix contrib Makefiles to use libtool and be consistent (ITS#6883)
This makes existing Makefiles provided with contrib modules more consistent, using libtool for compiling and linking. A trivial test target has also been added, which tests that the module can be loaded. Existing Makefiles were consulted, but were mainly copied from the first working/tested Makefile. As such, any pre-existing copyright notices have been replaced.
Makefiles are also provided for all the contrib modules that did not have Makefiles. =2D-- contrib/slapd-modules/acl/Makefile | 48 +++++++++++++++ contrib/slapd-modules/addpartial/Makefile | 50 ++++++++++++++--- contrib/slapd-modules/allop/Makefile | 47 +++++++++++++++ contrib/slapd-modules/allowed/Makefile | 58 ++++++++++--------- contrib/slapd-modules/autogroup/Makefile | 36 +++++++++--- contrib/slapd-modules/cloak/Makefile | 43 ++++++++++++-- contrib/slapd-modules/denyop/Makefile | 48 +++++++++++++++ contrib/slapd-modules/dsaschema/Makefile | 47 +++++++++++++++ contrib/slapd-modules/dupent/Makefile | 58 +++++++++---------- contrib/slapd-modules/kinit/Makefile | 47 +++++++++++++++ contrib/slapd-modules/lastbind/Makefile | 32 +++++++--- contrib/slapd-modules/lastmod/Makefile | 48 +++++++++++++++ contrib/slapd-modules/noopsrch/Makefile | 58 +++++++++---------- contrib/slapd-modules/nops/Makefile | 47 ++++++++++++---- contrib/slapd-modules/nssov/Makefile | 13 ++++- contrib/slapd-modules/passwd/Makefile | 86 +++++++++++++++---------= =2D--- contrib/slapd-modules/passwd/sha2/Makefile | 48 +++++++++++++--- contrib/slapd-modules/trace/Makefile | 48 +++++++++++++++ 18 files changed, 680 insertions(+), 182 deletions(-) create mode 100644 contrib/slapd-modules/acl/Makefile create mode 100644 contrib/slapd-modules/allop/Makefile create mode 100644 contrib/slapd-modules/denyop/Makefile create mode 100644 contrib/slapd-modules/dsaschema/Makefile create mode 100644 contrib/slapd-modules/kinit/Makefile create mode 100644 contrib/slapd-modules/lastmod/Makefile create mode 100644 contrib/slapd-modules/trace/Makefile
diff --git a/contrib/slapd-modules/acl/Makefile b/contrib/slapd-modules/acl= /Makefile new file mode 100644 index 0000000..9f48c0d =2D-- /dev/null +++ b/contrib/slapd-modules/acl/Makefile @@ -0,0 +1,48 @@ +# $OpenLDAP$ +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# http://www.OpenLDAP.org/license.html. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +CPPFLAGS+=3D-DSLAPD_OVER_ACL=3DSLAPD_MOD_DYNAMIC +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: posixgroup.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< + +clean: + rm -rf *.lo *.la *.o .libs/ + +install: posixgroup.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: posixgroup.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/addpartial/Makefile b/contrib/slapd-modu= les/addpartial/Makefile index 3b68815..2f1fd31 100644 =2D-- a/contrib/slapd-modules/addpartial/Makefile +++ b/contrib/slapd-modules/addpartial/Makefile @@ -1,13 +1,47 @@ # $OpenLDAP$ =2DOPENLDAP_SRC=3D../../.. =2DOPENLDAP_BLD=3D../../.. =2DCPPFLAGS+=3D-I${OPENLDAP_SRC}/include -I${OPENLDAP_SRC}/servers/slapd -I= ${OPENLDAP_BLD}/include =2DCC=3Dgcc +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# http://www.OpenLDAP.org/license.html. =20 =2Dall: addpartial-overlay.so +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +LIBTOOL=3D../../../libtool =20 =2Daddpartial-overlay.so: addpartial-overlay.c =2D $(CC) -shared $(CPPFLAGS) $(LDFLAGS) -Wall -o $@ $? +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: addpartial.la + +%.lo: addpartial-overlay.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< -o addpartial.lo + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm addpartial-overlay.so + rm -rf *.lo *.la *.o .libs/ + +install: addpartial.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: addpartial.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/allop/Makefile b/contrib/slapd-modules/a= llop/Makefile new file mode 100644 index 0000000..a995e61 =2D-- /dev/null +++ b/contrib/slapd-modules/allop/Makefile @@ -0,0 +1,47 @@ +# $OpenLDAP$ +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# http://www.OpenLDAP.org/license.html. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: allop.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< + +clean: + rm -rf *.lo *.la *.o .libs/ + +install: allop.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: allop.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/allowed/Makefile b/contrib/slapd-modules= /allowed/Makefile index 8f5be91..75e63c1 100644 =2D-- a/contrib/slapd-modules/allowed/Makefile +++ b/contrib/slapd-modules/allowed/Makefile @@ -1,8 +1,6 @@ =2D# $OpenLDAP$ =2D# This work is part of OpenLDAP Software http://www.openldap.org/. =2D# =2D# Copyright 1998-2011 The OpenLDAP Foundation. =2D# Copyright 2004 Howard Chu, Symas Corp. All Rights Reserved. +# $$ +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted only as authorized by the OpenLDAP @@ -12,35 +10,39 @@ # top-level directory of the distribution or, alternatively, at # http://www.OpenLDAP.org/license.html. =20 =2DPREFIX=3D/opt/openldap-HEAD =2D +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +CPPFLAGS+=3D-DSLAPD_OVER_ALLOWED=3DSLAPD_MOD_DYNAMIC LIBTOOL=3D../../../libtool =2DOPT=3D-g -O2 =2DCC=3Dgcc =2D =2DDEFS=3D-DSLAPD_OVER_ALLOWED=3DSLAPD_MOD_DYNAMIC =2D =2DLDAP_INC=3D-I../../../include -I../../../servers/slapd =2DINCS=3D$(LDAP_INC) =2D =2DLDAP_LIB=3D-lldap_r -llber -L../../../lib =2DLDAP_LIB=3D =2DLIBS=3D$(LDAP_LIB) =20 =2Dall: allowed.la +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd =20 +all: allowed.la =20 =2Dallowed.lo: allowed.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(OPT) $(DEFS) $(INCS) -c $? +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< =20 =2Dallowed.la: allowed.lo =2D $(LIBTOOL) --mode=3Dlink $(CC) $(OPT) -version-info 0:0:0 \ =2D -rpath $(PREFIX)/lib -module -o $@ $? $(LIBS) +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm -f allowed.o allowed.lo allowed.la + rm -rf *.lo *.la *.o .libs/ =20 install: allowed.la =2D mkdir -p $(PREFIX)/libexec/openldap =2D $(LIBTOOL) --mode=3Dinstall cp allowed.la $(PREFIX)/libexec/openldap =2D $(LIBTOOL) --finish $(PREFIX)/libexec/openldap + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: allowed.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/autogroup/Makefile b/contrib/slapd-modul= es/autogroup/Makefile index 70146ac..4438cbf 100644 =2D-- a/contrib/slapd-modules/autogroup/Makefile +++ b/contrib/slapd-modules/autogroup/Makefile @@ -1,6 +1,17 @@ =2DLIBTOOL=3D../../../libtool +# $OpenLDAP$ +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# http://www.OpenLDAP.org/license.html. =20 =2DCPPFLAGS+=3D-I../../../include -I../../../servers/slapd +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +LIBTOOL=3D../../../libtool =20 ldap_subdir =3D openldap prefix=3D/usr/local @@ -8,20 +19,29 @@ exec_prefix =3D $(prefix) libdir =3D $(exec_prefix)/lib libexecdir =3D $(exec_prefix)/libexec moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd =20 all: autogroup.la =20 =2Dautogroup.lo: autogroup.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $? +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< =20 =2Dautogroup.la: autogroup.lo +%.la: %.lo $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(libdir) -module -o $@ $?=20 + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm -f autogroup.lo autogroup.la + rm -rf *.lo *.la *.o .libs/ =20 install: autogroup.la mkdir -p $(DESTDIR)$(moduledir) =2D $(LIBTOOL) --mode=3Dinstall cp autogroup.la $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: autogroup.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/cloak/Makefile b/contrib/slapd-modules/c= loak/Makefile index 4562fcb..d92ff8b 100644 =2D-- a/contrib/slapd-modules/cloak/Makefile +++ b/contrib/slapd-modules/cloak/Makefile @@ -1,17 +1,48 @@ # $OpenLDAP$ +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# http://www.OpenLDAP.org/license.html. + CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 CPPFLAGS+=3D-DSLAPD_OVER_CLOAK=3DSLAPD_MOD_DYNAMIC =2DLIBS=3D-lldap_r -llber -lcrypto LIBTOOL=3D../../../libtool =20 +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + all: cloak.la =20 =2Dcloak.lo: cloak.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -c $? +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< =20 =2Dcloak.la: cloak.lo +%.la: %.lo $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(PREFIX)/lib -module -o $@ $? $(LIBS) + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm cloak.lo cloak.la + rm -rf *.lo *.la *.o .libs/ + +install: cloak.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: cloak.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/denyop/Makefile b/contrib/slapd-modules/= denyop/Makefile new file mode 100644 index 0000000..711eee7 =2D-- /dev/null +++ b/contrib/slapd-modules/denyop/Makefile @@ -0,0 +1,48 @@ +# $OpenLDAP$ +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# http://www.OpenLDAP.org/license.html. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +CPPFLAGS+=3D-DSLAPD_OVER_DENYOP=3DSLAPD_MOD_DYNAMIC +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: denyop.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< + +clean: + rm -rf *.lo *.la *.o .libs/ + +install: denyop.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: denyop.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/dsaschema/Makefile b/contrib/slapd-modul= es/dsaschema/Makefile new file mode 100644 index 0000000..90f711e =2D-- /dev/null +++ b/contrib/slapd-modules/dsaschema/Makefile @@ -0,0 +1,47 @@ +# $OpenLDAP$ +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# http://www.OpenLDAP.org/license.html. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: dsaschema.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< + +clean: + rm -rf *.lo *.la *.o .libs/ + +install: dsaschema.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: dsaschema.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/dupent/Makefile b/contrib/slapd-modules/= dupent/Makefile index 54a69ce..c1e8997 100644 =2D-- a/contrib/slapd-modules/dupent/Makefile +++ b/contrib/slapd-modules/dupent/Makefile @@ -1,8 +1,6 @@ # $OpenLDAP$ =2D# This work is part of OpenLDAP Software http://www.openldap.org/. =2D# =2D# Copyright 1998-2011 The OpenLDAP Foundation. =2D# Copyright 2004 Howard Chu, Symas Corp. All Rights Reserved. +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted only as authorized by the OpenLDAP @@ -12,41 +10,39 @@ # top-level directory of the distribution or, alternatively, at # http://www.OpenLDAP.org/license.html. =20 +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +CPPFLAGS+=3D-DSLAPD_OVER_DUPENT=3DSLAPD_MOD_DYNAMIC -g -O2 LIBTOOL=3D../../../libtool =2DOPT=3D-DSLAPD_OVER_DUPENT=3D2 -g -O2 =2D#LIBTOOL=3D../../../../ldap-devel/libtool =2D#OPT=3D-DSLAPD_OVER_DUPENT=3D2 -g -O0 =2DCC=3Dgcc =2D =2DLDAP_INC=3D-I../../../include -I../../../servers/slapd =2D#LDAP_INC=3D-I../../../include -I../../../servers/slapd -I../../../../ld= ap-devel/include =2DINCS=3D$(LDAP_INC) =2D =2DLDAP_LIB=3D-lldap_r -llber =2DLIBS=3D$(LDAP_LIB) =20 +ldap_subdir =3D openldap prefix=3D/usr/local =2Dexec_prefix=3D$(prefix) =2Dldap_subdir=3D/openldap +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd =20 =2Dlibdir=3D$(exec_prefix)/lib =2Dlibexecdir=3D$(exec_prefix)/libexec =2Dmoduledir =3D $(libexecdir)$(ldap_subdir) +all: dupent.la =20 =2Dall: dupent.la +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< =20 =2D =2Ddupent.lo: dupent.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(OPT) $(DEFS) $(INCS) -c $? =2D =2Ddupent.la: dupent.lo =2D $(LIBTOOL) --mode=3Dlink $(CC) $(OPT) -version-info 0:0:0 \ =2D -rpath $(moduledir) -module -o $@ $? $(LIBS) +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm -f dupent.lo dupent.la + rm -rf *.lo *.la *.o .libs/ =20 install: dupent.la mkdir -p $(DESTDIR)$(moduledir) =2D $(LIBTOOL) --mode=3Dinstall cp dupent.la $(DESTDIR)$(moduledir) =2D + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: dupent.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/kinit/Makefile b/contrib/slapd-modules/k= init/Makefile new file mode 100644 index 0000000..750c7b9 =2D-- /dev/null +++ b/contrib/slapd-modules/kinit/Makefile @@ -0,0 +1,47 @@ +# $OpenLDAP$ +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# http://www.OpenLDAP.org/license.html. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: kinit.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< -lkrb5 + +clean: + rm -rf *.lo *.la *.o .libs/ + +install: kinit.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: kinit.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/lastbind/Makefile b/contrib/slapd-module= s/lastbind/Makefile index ecc9ed1..643b0c1 100644 =2D-- a/contrib/slapd-modules/lastbind/Makefile +++ b/contrib/slapd-modules/lastbind/Makefile @@ -1,5 +1,5 @@ # $OpenLDAP$ =2D# Copyright 2009 Jonathan Clarke jonathan@phillipoux.net. +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net # All rights reserved. # # Redistribution and use in source and binary forms, with or without @@ -12,23 +12,37 @@ =20 CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 CPPFLAGS+=3D-DSLAPD_OVER_LASTBIND=3DSLAPD_MOD_DYNAMIC =2D#LIBTOOL=3Dlibtool LIBTOOL=3D../../../libtool =20 +ldap_subdir =3D openldap prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd =20 all: lastbind.la =20 =2Dlastbind.lo: lastbind.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $? +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< =20 =2Dlastbind.la: lastbind.lo +%.la: %.lo $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(prefix)/lib -module -o $@ $? + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm -rf lastbind.lo lastbind.la lastbind.o .libs/ + rm -rf *.lo *.la *.o .libs/ =20 install: lastbind.la =2D mkdir -p $(prefix)/libexec/openldap =2D $(LIBTOOL) --mode=3Dinstall cp lastbind.la $(prefix)/libexec/openldap + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: lastbind.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/lastmod/Makefile b/contrib/slapd-modules= /lastmod/Makefile new file mode 100644 index 0000000..e9f0408 =2D-- /dev/null +++ b/contrib/slapd-modules/lastmod/Makefile @@ -0,0 +1,48 @@ +# $OpenLDAP$ +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# http://www.OpenLDAP.org/license.html. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +CPPFLAGS+=3D-DSLAPD_OVER_LASTMOD=3DSLAPD_MOD_DYNAMIC +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: lastmod.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< + +clean: + rm -rf *.lo *.la *.o .libs/ + +install: lastmod.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: lastmod.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/noopsrch/Makefile b/contrib/slapd-module= s/noopsrch/Makefile index d90bc59..7227582 100644 =2D-- a/contrib/slapd-modules/noopsrch/Makefile +++ b/contrib/slapd-modules/noopsrch/Makefile @@ -1,8 +1,6 @@ # $OpenLDAP$ =2D# This work is part of OpenLDAP Software http://www.openldap.org/. =2D# =2D# Copyright 1998-2011 The OpenLDAP Foundation. =2D# Copyright 2004 Howard Chu, Symas Corp. All Rights Reserved. +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted only as authorized by the OpenLDAP @@ -12,41 +10,39 @@ # top-level directory of the distribution or, alternatively, at # http://www.OpenLDAP.org/license.html. =20 +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +CPPFLAGS+=3D-DSLAPD_OVER_NOOPSRCH=3DSLAPD_MOD_DYNAMIC -g -O2 LIBTOOL=3D../../../libtool =2DOPT=3D-DSLAPD_OVER_NOOPSRCH=3D2 -g -O2 =2D#LIBTOOL=3D../../../../ldap-devel/libtool =2D#OPT=3D-DSLAPD_OVER_NOOPSRCH=3D2 -g -O0 =2DCC=3Dgcc =2D =2DLDAP_INC=3D-I../../../include -I../../../servers/slapd =2D#LDAP_INC=3D-I../../../include -I../../../servers/slapd -I../../../../ld= ap-devel/include =2DINCS=3D$(LDAP_INC) =2D =2DLDAP_LIB=3D-lldap_r -llber =2DLIBS=3D$(LDAP_LIB) =20 +ldap_subdir =3D openldap prefix=3D/usr/local =2Dexec_prefix=3D$(prefix) =2Dldap_subdir=3D/openldap +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd =20 =2Dlibdir=3D$(exec_prefix)/lib =2Dlibexecdir=3D$(exec_prefix)/libexec =2Dmoduledir =3D $(libexecdir)$(ldap_subdir) +all: noopsrch.la =20 =2Dall: noopsrch.la +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< =20 =2D =2Dnoopsrch.lo: noopsrch.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(OPT) $(DEFS) $(INCS) -c $? =2D =2Dnoopsrch.la: noopsrch.lo =2D $(LIBTOOL) --mode=3Dlink $(CC) $(OPT) -version-info 0:0:0 \ =2D -rpath $(moduledir) -module -o $@ $? $(LIBS) +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm -f noopsrch.lo noopsrch.la + rm -rf *.lo *.la *.o .libs/ =20 install: noopsrch.la mkdir -p $(DESTDIR)$(moduledir) =2D $(LIBTOOL) --mode=3Dinstall cp noopsrch.la $(DESTDIR)$(moduledir) =2D + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: noopsrch.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/nops/Makefile b/contrib/slapd-modules/no= ps/Makefile index fce44e0..6da5cd0 100644 =2D-- a/contrib/slapd-modules/nops/Makefile +++ b/contrib/slapd-modules/nops/Makefile @@ -1,23 +1,48 @@ # $OpenLDAP$ +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# http://www.OpenLDAP.org/license.html. + CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 CPPFLAGS+=3D-DSLAPD_OVER_NOPS=3DSLAPD_MOD_DYNAMIC =2DLIBS=3D-L$(PREFIX)/lib -lldap_r -llber -lcrypto +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd =20 all: nops.la =20 =2Dnops.lo: nops.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -c $? +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< =20 =2Dnops.la: nops.lo +%.la: %.lo $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(PREFIX)/lib -module -o $@ $? $(LIBS) + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm -f nops.lo nops.la + rm -rf *.lo *.la *.o .libs/ =20 install: nops.la =2D mkdir -p $(PREFIX)/lib/openldap=20 =2D mkdir -p $(PREFIX)/man/man5 =2D $(LIBTOOL) --mode=3Dinstall cp nops.la $(PREFIX)/lib/openldap =2D $(LIBTOOL) --finish $(PREFIX)/lib =2D cp nops.5 $(PREFIX)/man/man5 + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: nops.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/nssov/Makefile b/contrib/slapd-modules/n= ssov/Makefile index 322fcdd..f1ec793 100644 =2D-- a/contrib/slapd-modules/nssov/Makefile +++ b/contrib/slapd-modules/nssov/Makefile @@ -28,7 +28,7 @@ NLDAPD_INC=3D-Inss-pam-ldapd INCS=3D$(LDAP_INC) $(NLDAPD_INC) =20 LDAP_LIB=3D-lldap_r -llber =2DLIBS=3D$(LDAP_LIB) +LIBS=3D-L../../../libraries/liblber -L../../../libraries/libldap_r $(LDAP_= LIB) =20 prefix=3D/usr/local exec_prefix=3D$(prefix) @@ -39,6 +39,7 @@ libexecdir=3D$(exec_prefix)/libexec moduledir =3D $(libexecdir)$(ldap_subdir) sysconfdir =3D $(prefix)/etc$(ldap_subdir) schemadir =3D $(sysconfdir)/schema +slapd=3D../../../servers/slapd/slapd =20 all: nssov.la =20 @@ -59,7 +60,7 @@ $(OBJS): nssov.h =20 nssov.la: $(OBJS) $(XOBJS) $(LIBTOOL) --mode=3Dlink $(CC) $(OPT) -version-info 0:0:0 \ =2D -rpath $(libdir) -module -o $@ $(OBJS) $(XOBJS) $(LIBS) + -rpath $(moduledir) -module -o $@ $(OBJS) $(XOBJS) $(LIBS) =20 install: nssov.la mkdir -p $(DESTDIR)$(moduledir) @@ -69,3 +70,11 @@ install: nssov.la clean: rm -f *.*o *.la .libs/* rm -rf .libs + +test: nssov.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/passwd/Makefile b/contrib/slapd-modules/= passwd/Makefile index 1e49e6a..748b4ce 100644 =2D-- a/contrib/slapd-modules/passwd/Makefile +++ b/contrib/slapd-modules/passwd/Makefile @@ -1,46 +1,52 @@ # $OpenLDAP$ =2DCPPFLAGS+=3D-I../../../include -I../../../servers/slapd =2D =2Dall: kerberos.la netscape.la radius.la apr1.la =2D =2Dkerberos.lo: kerberos.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -DHAVE_KRB5 -Wall -c $? =2D =2Dkerberos.la: kerberos.lo =2D $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(PREFIX)/lib -module -o $@ $? -lkrb5 =2D =2Dnetscape.lo: netscape.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $? =2D =2Dnetscape.la: netscape.lo +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# http://www.OpenLDAP.org/license.html. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +LIBTOOL=3D../../../libtool +SUBDIRS =3D sha2 + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: kerberos.la netscape.la radius.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +kerberos.la: kerberos.lo $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(PREFIX)/lib -module -o $@ $?=20 =2D =2Dradius.lo: radius.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $? =2D =2Dradius.la: radius.lo =2D $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(PREFIX)/lib -module -o $@ $? -lradius =2D =2Dapr1.lo: apr1.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $? + -rpath $(moduledir) -module -o $@ $< -lkrb5 =20 =2Dapr1.la: apr1.lo +%.la: %.lo $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(PREFIX)/lib -module -o $@ $?=20 + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm -f kerberos.lo kerberos.la =2D rm -f netscape.lo netscape.la =2D rm -f radius.lo radius.la =2D rm -f apr1.lo apr1.la =2D =2Dinstall: kerberos.la netscape.la radius.la apr1.la =2D mkdir -p $(PREFIX)/lib/openldap =2D $(LIBTOOL) --mode=3Dinstall cp kerberos.la $(PREFIX)/lib/openldap =2D $(LIBTOOL) --mode=3Dinstall cp netscape.la $(PREFIX)/lib/openldap =2D $(LIBTOOL) --mode=3Dinstall cp radius.la $(PREFIX)/lib/openldap =2D $(LIBTOOL) --mode=3Dinstall cp apr1.la $(PREFIX)/lib/openldap =2D $(LIBTOOL) --finish $(PREFIX)/lib + rm -rf *.lo *.la *.o .libs/ + +install: kerberos.la netscape.la radius.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: kerberos.la netscape.la radius.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/passwd/sha2/Makefile b/contrib/slapd-mod= ules/passwd/sha2/Makefile index 5dcb1db..d03297d 100644 =2D-- a/contrib/slapd-modules/passwd/sha2/Makefile +++ b/contrib/slapd-modules/passwd/sha2/Makefile @@ -1,15 +1,47 @@ # $OpenLDAP$ +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# http://www.OpenLDAP.org/license.html. =20 =2DOPENLDAP :=3D ../../../.. +CPPFLAGS+=3D-I../../../../include -I../../../../servers/slapd=20 +LIBTOOL=3D../../../../libtool =20 =2D#CCFLAGS =3D -Wall -g -DSLAPD_SHA2_DEBUG =2DCCFLAGS =3D -Wall -g +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../../servers/slapd/slapd =20 =2Dslapd-sha2.so: slapd-sha2.o sha2.o =2D $(CC) -I$(OPENLDAP)/include -shared -Wall -g $^ -o $@ +all: sha2.la =20 =2D%.o: %.c =2D $(CC) -I$(OPENLDAP)/include $(CCFLAGS) -c $< +%.lo: slapd-sha2.c sha2.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: slapd-sha2.lo sha2.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D @rm -f slapd-sha2.so *.o + rm -rf *.lo *.la *.o .libs/ + +install: sha2.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: sha2.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/trace/Makefile b/contrib/slapd-modules/t= race/Makefile new file mode 100644 index 0000000..948ffef =2D-- /dev/null +++ b/contrib/slapd-modules/trace/Makefile @@ -0,0 +1,48 @@ +# $OpenLDAP$ +# Copyright 2011 Buchan Milne bgmilne@staff.telkomsa.net +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# http://www.OpenLDAP.org/license.html. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +CPPFLAGS+=3D-DSLAPD_OVER_TRACE=3DSLAPD_MOD_DYNAMIC +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: trace.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< + +clean: + rm -rf *.lo *.la *.o .libs/ + +install: trace.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: trace.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done =2D-=20 1.7.4.4
--Boundary-00=_XqOPP0RBjyQeXED--
-
bgmilne＠staff.telkomsa.net