openldap-bugs

openldap-bugs@openldap.org

1 participants
20967 discussions

Re: (ITS#8909) "authz-policy all" works as "authz-policy any", possibly yielding unauthorized access
by hyc＠symas.com 28 Aug '18

28 Aug '18

guilhem(a)fripost.org wrote: > Full_Name: Guilhem Moulin > Version: 2.4.44 > OS: Debian GNU/Linux (Stretch) > URL: ftp://ftp.openldap.org/incoming/ > Submission from: (NULL) (109.225.112.70) >=20 >=20 > slapd.conf(5) manpage (in both 2.4.44 and in current =E2=80=94 0f320b3 = =E2=80=94 master) > mentions that authz-policy's "all" flag requires both source and destin= ations > authorizations rules to succeed. However if the source rule (the authe= ntication > identity's "authzTo" attribute) fails but the destination rule (the > authorization identity's "authzFrom" attribute) succeeds, then the auth= orization > is granted, violating the intended semantics and possibly yielding unau= thorized > access. See the following log excerpt: Thanks for the report. Looks like this has been present since commit 1137= 27ba. Fixed now in git master >=20 > SASL proxy authorize [conn=3D1019]: authcid=3D"authcid" > authzid=3D"dn:uid=3Dauthzid,dc=3Dexample,dc=3Dnet" > =3D=3D>slap_sasl_authorized: can uid=3Dauthcid,dc=3Dexample,dc=3Dnet be= come > uid=3Dauthzid,dc=3Dexample,dc=3Dnet? > =3D=3D>slap_sasl_check_authz: does uid=3Dauthzid,dc=3Dexample,dc=3Dnet = match authzTo rule > in uid=3Dauthcid,dc=3Dexample,dc=3Dnet? > <=3D=3Dslap_sasl_check_authz: authzTo check returning 50 > =3D=3D>slap_sasl_check_authz: does uid=3Dauthcid,dc=3Dexample,dc=3Dnet = match authzFrom > rule in uid=3Dauthzid,dc=3Dexample,dc=3Dnet? > <=3D=3D=3Dslap_sasl_match: comparison returned 0 > <=3D=3Dslap_sasl_check_authz: authzFrom check returning 0 > <=3D=3D slap_sasl_authorized: return 0 > conn=3D1019 op=3D1 BIND authcid=3D"authcid" > authzid=3D"dn:uid=3Dauthzid,dc=3Dexample,dc=3Dnet" > SASL Authorize [conn=3D1019]: proxy authorization allowed > authzDN=3D"uid=3Dauthzid,dc=3Dexample,dc=3Dnet" >=20 > AFAICT the problem is in servers/slapd/saslauthz.c:slap_sasl_authorized= (), and > is also present in master. Here is a naive patch that fails the author= ization > if the source rules doesn't verify and SASL_AUTHZ_AND is set in authz_p= olicy. >=20 > --- a/servers/slapd/saslauthz.c > +++ b/servers/slapd/saslauthz.c > @@ -2077,6 +2077,10 @@ int slap_sasl_authorized( Operation *op, > if( rc =3D=3D LDAP_SUCCESS && !(authz_policy & SASL_AUTHZ_AND)= ) { > goto DONE; > } > + else if( rc !=3D LDAP_SUCCESS && (authz_policy & SASL_AUTHZ_AN= D) ) { > + rc =3D LDAP_INAPPROPRIATE_AUTH; > + goto DONE; > + } > } > =20 > /* Check destination rules */ >=20 >=20 --=20 -- Howard Chu CTO, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

(ITS#8909) "authz-policy all" works as "authz-policy any", possibly yielding unauthorized access
by guilhem＠fripost.org 28 Aug '18

28 Aug '18

Full_Name: Guilhem Moulin Version: 2.4.44 OS: Debian GNU/Linux (Stretch) URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (109.225.112.70) slapd.conf(5) manpage (in both 2.4.44 and in current 0f320b3 master) mentions that authz-policy's "all" flag requires both source and destinations authorizations rules to succeed. However if the source rule (the authentication identity's "authzTo" attribute) fails but the destination rule (the authorization identity's "authzFrom" attribute) succeeds, then the authorization is granted, violating the intended semantics and possibly yielding unauthorized access. See the following log excerpt: SASL proxy authorize [conn=1019]: authcid="authcid" authzid="dn:uid=authzid,dc=example,dc=net" ==>slap_sasl_authorized: can uid=authcid,dc=example,dc=net become uid=authzid,dc=example,dc=net? ==>slap_sasl_check_authz: does uid=authzid,dc=example,dc=net match authzTo rule in uid=authcid,dc=example,dc=net? <==slap_sasl_check_authz: authzTo check returning 50 ==>slap_sasl_check_authz: does uid=authcid,dc=example,dc=net match authzFrom rule in uid=authzid,dc=example,dc=net? <===slap_sasl_match: comparison returned 0 <==slap_sasl_check_authz: authzFrom check returning 0 <== slap_sasl_authorized: return 0 conn=1019 op=1 BIND authcid="authcid" authzid="dn:uid=authzid,dc=example,dc=net" SASL Authorize [conn=1019]: proxy authorization allowed authzDN="uid=authzid,dc=example,dc=net" AFAICT the problem is in servers/slapd/saslauthz.c:slap_sasl_authorized(), and is also present in master. Here is a naive patch that fails the authorization if the source rules doesn't verify and SASL_AUTHZ_AND is set in authz_policy. --- a/servers/slapd/saslauthz.c +++ b/servers/slapd/saslauthz.c @@ -2077,6 +2077,10 @@ int slap_sasl_authorized( Operation *op, if( rc == LDAP_SUCCESS && !(authz_policy & SASL_AUTHZ_AND) ) { goto DONE; } + else if( rc != LDAP_SUCCESS && (authz_policy & SASL_AUTHZ_AND) ) { + rc = LDAP_INAPPROPRIATE_AUTH; + goto DONE; + } } /* Check destination rules */

1 0

Re: (ITS#8650) EAGAIN from gnutls_handshake not respected
by subbarao＠computer.org 27 Aug '18

27 Aug '18

On 08/26/2018 03:07 PM, Ryan Tandy wrote: > If I create a patch to log some additional debug info about the GnuTLS > setup, would you be willing to run it in your environment? For example > I'm curious whether EAGAIN is being returned from the read side or > write side (guessing read, but would be nice to confirm). Sure, send me the patch. If the patch just does some additional GnuTLS logging, then I don't see a problem with running it in the production environment and sending you the results. Regards, -Kartik

1 0

(ITS#8908) LMDB Documentation for MDB_XXX_MULTIPLE
by karl＠waclawek.net 26 Aug '18

26 Aug '18

Full_Name: Karl Waclawek Version: LMDB 0.9.22 OS: Windows 10 URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (2607:fea8:7a80:814:3ca9:e8f6:801c:d6f8) The documentation in lmdb.h for MDB_GET_MULTIPLE, MDB_NEXT_MULTIPLE and MDB_PREV_MULTIPLE seems to have two issues: 1) The documentation indicates that both, the key and data, are returned, but in reality only the data is returned. 2) The documentation states that MDB_GET_MULTIPLE moves the cursor. This does not seem to be true.

1 0

Re: (ITS#8650) EAGAIN from gnutls_handshake not respected
by ryan＠nardis.ca 26 Aug '18

26 Aug '18

Hi Karthik, Sorry about the lack of updates on this one. It looks clear that my patch for this ITS was wrong and needs to be reverted. Looking again at the original issue, after reverting the patch, I've found that the behaviour varies with GnuTLS version. I need to figure out why this is, which probably means spending some time bisecting GnuTLS changes. If I create a patch to log some additional debug info about the GnuTLS setup, would you be willing to run it in your environment? For example I'm curious whether EAGAIN is being returned from the read side or write side (guessing read, but would be nice to confirm). thanks Ryan

1 0

(ITS#8907) Memory leak on mass adding users to ldap
by nowhereman＠nowhereman.ru 24 Aug '18

24 Aug '18

Full_Name: Alexey Karpov Version: 2.4.44 OS: RHEL 7.5 URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (87.245.195.105) We have two OpenLDAP servers version 2.4.44, running on RHEL 7.5, replicated in mirror mode and working as active-standby. OpenLDAP works as userstore for WSO2 Identity Server. Servers configured with tls security and valid certificates. All requests come to first server (ldap1), second server (ldap2) working as reserve. When we start batch adding users (about 3-5 inserts per second, mixed with queries and changing values), we observe a memory leak on server ldap1, load-dependent, up to gigabyte per minute, and the lag in sync between servers. If we stop server ldap2, leaking stops and server ldap1 working properly. Memory is not freeing until server is restarted. Also we try this setup with version 2.4.44 on Centos 7 and custom builded version 2.4.46 on Centos 7. Results are the same - on batch adding users, server, receiving requests has memory leak and leaking stops when second server stopped.

1 0

(ITS#8906) Fail to download package in yocto project
by zyong＠qti.qualcomm.com 24 Aug '18

24 Aug '18

Full_Name: Yong Zhang Version: 2.4.43 OS: linux URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (180.166.53.43) ftp://ftp.openldap.org/pub/OpenLDAP/openldap-release/${BP}.tgz is not available

1 0

(ITS#8905) Client side debug log should include timestamps
by quanah＠openldap.org 21 Aug '18

21 Aug '18

Full_Name: Quanah Gibson-Mount Version: 2.4.46 OS: N/A URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (47.208.148.239) When specifying full debug on the client side (-d -1), there are no timestamps provided. This is problematic when trying to diagnose where the client side is having issues when connecting to the slapd server. I.e., an ldapwhoami command that takes 19 seconds to go from start to finish, while the slapd side shows everything taking 1 second or less.

1 0

(ITS#8904) Cannot enable SSL3 when disabled by default in OpenSSL
by mhonek＠redhat.com 21 Aug '18

21 Aug '18

Full_Name: Matus Honek Version: 2.4.46 OS: Fedora 28 URL: ftp://ftp.openldap.org/incoming/Matus-Honek-180821.patch Submission from: (NULL) (213.175.37.10) When in OpenSSL one disables SSL3 by default (the SSL_OP_NO_SSLv3 is set by default, like in recent Fedora distributions) then with the current code in OpenLDAP it is not possible to have it re-enabled using TLS_PROTOCOL_MIN configuration option. The attached patch explicitly clears the SSL_OP_NO_SSLv3 option when TLS_PROTOCOL_MIN is set so that SSL3 should be enabled. Feel free to use it; I believe IPR should not be necessary for a one liner. However, in the future when more protocols will be disabled by default (possibly soon for TLS1.0 and TLS1.1), similar fixes will be needed for those as well. Or, it may be decided to not support the protocols that are disabled by default but in that case probably a log message should be issued once user tries to enable a by default disabled protocol.

1 0

RE: (ITS#8848) New LDAP URL syntax to support binding to specific IP address at client side
by sudhir.singam＠nokia.com 21 Aug '18

21 Aug '18

Hi, Any comments ?? Regards, Sudhir Singam DELIVERING BEST-IN-CLASS PLATFORM is our vision -----Original Message----- From: openldap-its(a)OpenLDAP.org <openldap-its(a)OpenLDAP.org>=20 Sent: Monday, May 07, 2018 12:02 PM To: Singam, Sudhir (Nokia - IN/Bangalore) <sudhir.singam(a)nokia.com> Subject: Re: (ITS#8848) New LDAP URL syntax to support binding to specific = IP address at client side *** THIS IS AN AUTOMATICALLY GENERATED REPLY *** Thanks for your report to the OpenLDAP Issue Tracking System. Your report has been assigned the tracking number ITS#8848. One of our support engineers will look at your report in due course. Note that this may take some time because our support engineers are volunteers. They only work on OpenLDAP when they have spare time. If you need to provide additional information in regards to your issue report, you may do so by replying to this message. Note that any mail sent to openldap-its(a)openldap.org with (ITS#8848) in the subject will automatically be attached to the issue report. mailto:openldap-its@openldap.org?subject=3D(ITS#8848) You may follow the progress of this report by loading the following URL in a web browser: http://www.OpenLDAP.org/its/index.cgi?findid=3D8848 Please remember to retain your issue tracking number (ITS#8848) on any further messages you send to us regarding this report. If you don't then you'll just waste our time and yours because we won't be able to properly track the report. Please note that the Issue Tracking System is not intended to be used to seek help in the proper use of OpenLDAP Software. Such requests will be closed. OpenLDAP Software is user supported. http://www.OpenLDAP.org/support/ -------------- Copyright 1998-2007 The OpenLDAP Foundation, All Rights Reserved.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openldap-bugs