openldap-bugs

openldap-bugs@openldap.org

1 participants
21063 discussions

Re: (ITS#4817) modify "replace" command firing conflict error where it shouldn't be
by hyc＠symas.com 28 Jan '07

28 Jan '07

Are you by any chance using slapadd -q? As noted in the documentation, that turns off a lot of consistency checks. One of the things it turns off is the input sorting, because you're only supposed to feed valid LDIF to slapadd -q. daniel(a)ncsu.edu wrote: >> daniel(a)ncsu.edu wrote: >>> Hi Howard! As much as I hate to say this, it did not solve the problem >>> I >>> was running into. =( I rebuilt openldap with the entry.c patch and >>> rebuilt the LDAP database from scratch (pulling from sources and using >>> slapadd). Then I ran the following statement via ldapmodify (as always, >>> XXX'd out sensitive info): >> The slapcat output you provide shows that the attribute was already >> slapadded >> incorrectly. Please provide the "pulling from sources" input you used with >> slapadd for this entry. -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc OpenLDAP Core Team http://www.openldap.org/project/

1 0

Re: (ITS#4817) modify "replace" command firing conflict error where it shouldn't be
by daniel＠ncsu.edu 28 Jan '07

28 Jan '07

> daniel(a)ncsu.edu wrote: >> Note that I have not changed anything to add the ou's as a group and the >> ncsuCurriculumCode's as a group, but from what I understood, this should >> work fine for openldap, even if it may or may not be truly legit based >> off >> the RFCs. And again, I have not changed anything in this code and have >> been adding things like this for the past 2 years with OpenLDAP 2.2 and >> earlier. I mean sure I can go edit my code to add those ou's and >> ncsucurriculumcodes in the correct order (ie, bunched together), but if >> you are saying openldap should be able to handle this, I'd like to stick >> with it and see it resolved instead of letting it be a dangling >> difference >> behavior since 2.2. If you want to make an official-like statement that >> what I'm doing there is not proper and not supported, then so be it, >> I'll >> take that as golden and adjust my code. =) (in other words, would you >> rather it be that this is flat out not supported? .. of course if it's >> not >> supported it would be nicer if openldap yelled about it instead of >> accepting it and just being mad afterwards) > > It is supposed to work. On my tests it does work. I have no idea what's > happening on your side. > > Here's a snippet from running slapadd with -d -1 for the entry I tested > with. > Since I didn't have your NCSU schema I substituted some other > attributetypes > instead, but it should be equivalent. Note that I used "ou:" and "Ou:" > which > would have triggered the error before. The fact that "ou" only turns up > once > in the oc_check_allowed messages indicates that it correctly parsed them > into > a single attribute. I'm going to send you this information "out of band". There's so much of it that printed and I'm not 100% sure what is any is not sensitive in the output. =( Daniel > > Please send your corresponding debug output for this operation. > > slapadd startup: initiated. > backend_startup_one: starting "dc=example,dc=com" > bdb_db_open: dc=example,dc=com > bdb_db_open: Warning - No DB_CONFIG file found in directory > ./testrun/db.1.a: (2) > Expect poor performance for suffix dc=example,dc=com. > bdb_db_open: dbenv_open(./testrun/db.1.a) > => str2entry: "dn: uid=XXX,ou=people,dc=example,dc=com > objectClass: person > objectClass: inetOrgPerson > objectClass: openldapperson > uid: XXX > cn: XXX > sn: XXX > title: Senior > description: XXX > organizationalStatus: registered > o: NC State University > gn: XXX > initials: XXX > displayName: XXX > personalTitle: XXX > departmentNumber: XXX > destinationIndicator: SR > Ou: Physics > businessCategory: PY > ou: B S - Philosophy > businessCategory: LSL > mail: XXX(a)unity.ncsu.edu > labeleduri: XXX(a)unity.ncsu.edu > registeredAddress: XXX > postalAddress: XXX > telephoneNumber: XXX > l: Raleigh > st: NC > postalCode: 27603 > employeeType: staff > " > >>> dnPrettyNormal: <uid=XXX,ou=people,dc=example,dc=com> > <<< dnPrettyNormal: <uid=XXX,ou=people,dc=example,dc=com>, > <uid=xxx,ou=people,dc=example,dc=com> > <= str2entry(uid=XXX,ou=people,dc=example,dc=com) -> 0x7734f0 > oc_check_required entry (uid=XXX,ou=people,dc=example,dc=com), objectClass > "OpenLDAPperson" > oc_check_allowed type "objectClass" > oc_check_allowed type "uid" > oc_check_allowed type "cn" > oc_check_allowed type "sn" > oc_check_allowed type "title" > oc_check_allowed type "description" > oc_check_allowed type "organizationalStatus" > oc_check_allowed type "o" > oc_check_allowed type "givenName" > oc_check_allowed type "initials" > oc_check_allowed type "displayName" > oc_check_allowed type "personalTitle" > oc_check_allowed type "departmentNumber" > oc_check_allowed type "destinationIndicator" > oc_check_allowed type "ou" > oc_check_allowed type "businessCategory" > oc_check_allowed type "mail" > oc_check_allowed type "labeledURI" > oc_check_allowed type "registeredAddress" > oc_check_allowed type "postalAddress" > oc_check_allowed type "telephoneNumber" > oc_check_allowed type "l" > oc_check_allowed type "st" > oc_check_allowed type "postalCode" > oc_check_allowed type "employeeType" > oc_check_allowed type "structuralObjectClass" > => bdb_tool_entry_put( -1, "uid=XXX,ou=people,dc=example,dc=com" ) > > > -- > -- Howard Chu > Chief Architect, Symas Corp. http://www.symas.com > Director, Highland Sun http://highlandsun.com/hyc > OpenLDAP Core Team http://www.openldap.org/project/ >

1 0

Re: (ITS#4817) modify "replace" command firing conflict error where it shouldn't be
by hyc＠symas.com 28 Jan '07

28 Jan '07

daniel(a)ncsu.edu wrote: > Note that I have not changed anything to add the ou's as a group and the > ncsuCurriculumCode's as a group, but from what I understood, this should > work fine for openldap, even if it may or may not be truly legit based off > the RFCs. And again, I have not changed anything in this code and have > been adding things like this for the past 2 years with OpenLDAP 2.2 and > earlier. I mean sure I can go edit my code to add those ou's and > ncsucurriculumcodes in the correct order (ie, bunched together), but if > you are saying openldap should be able to handle this, I'd like to stick > with it and see it resolved instead of letting it be a dangling difference > behavior since 2.2. If you want to make an official-like statement that > what I'm doing there is not proper and not supported, then so be it, I'll > take that as golden and adjust my code. =) (in other words, would you > rather it be that this is flat out not supported? .. of course if it's not > supported it would be nicer if openldap yelled about it instead of > accepting it and just being mad afterwards) It is supposed to work. On my tests it does work. I have no idea what's happening on your side. Here's a snippet from running slapadd with -d -1 for the entry I tested with. Since I didn't have your NCSU schema I substituted some other attributetypes instead, but it should be equivalent. Note that I used "ou:" and "Ou:" which would have triggered the error before. The fact that "ou" only turns up once in the oc_check_allowed messages indicates that it correctly parsed them into a single attribute. Please send your corresponding debug output for this operation. slapadd startup: initiated. backend_startup_one: starting "dc=example,dc=com" bdb_db_open: dc=example,dc=com bdb_db_open: Warning - No DB_CONFIG file found in directory ./testrun/db.1.a: (2) Expect poor performance for suffix dc=example,dc=com. bdb_db_open: dbenv_open(./testrun/db.1.a) => str2entry: "dn: uid=XXX,ou=people,dc=example,dc=com objectClass: person objectClass: inetOrgPerson objectClass: openldapperson uid: XXX cn: XXX sn: XXX title: Senior description: XXX organizationalStatus: registered o: NC State University gn: XXX initials: XXX displayName: XXX personalTitle: XXX departmentNumber: XXX destinationIndicator: SR Ou: Physics businessCategory: PY ou: B S - Philosophy businessCategory: LSL mail: XXX(a)unity.ncsu.edu labeleduri: XXX(a)unity.ncsu.edu registeredAddress: XXX postalAddress: XXX telephoneNumber: XXX l: Raleigh st: NC postalCode: 27603 employeeType: staff " >>> dnPrettyNormal: <uid=XXX,ou=people,dc=example,dc=com> <<< dnPrettyNormal: <uid=XXX,ou=people,dc=example,dc=com>, <uid=xxx,ou=people,dc=example,dc=com> <= str2entry(uid=XXX,ou=people,dc=example,dc=com) -> 0x7734f0 oc_check_required entry (uid=XXX,ou=people,dc=example,dc=com), objectClass "OpenLDAPperson" oc_check_allowed type "objectClass" oc_check_allowed type "uid" oc_check_allowed type "cn" oc_check_allowed type "sn" oc_check_allowed type "title" oc_check_allowed type "description" oc_check_allowed type "organizationalStatus" oc_check_allowed type "o" oc_check_allowed type "givenName" oc_check_allowed type "initials" oc_check_allowed type "displayName" oc_check_allowed type "personalTitle" oc_check_allowed type "departmentNumber" oc_check_allowed type "destinationIndicator" oc_check_allowed type "ou" oc_check_allowed type "businessCategory" oc_check_allowed type "mail" oc_check_allowed type "labeledURI" oc_check_allowed type "registeredAddress" oc_check_allowed type "postalAddress" oc_check_allowed type "telephoneNumber" oc_check_allowed type "l" oc_check_allowed type "st" oc_check_allowed type "postalCode" oc_check_allowed type "employeeType" oc_check_allowed type "structuralObjectClass" => bdb_tool_entry_put( -1, "uid=XXX,ou=people,dc=example,dc=com" ) -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc OpenLDAP Core Team http://www.openldap.org/project/

1 0

Re: (ITS#4817) modify "replace" command firing conflict error where it shouldn't be
by daniel＠ncsu.edu 28 Jan '07

28 Jan '07

> daniel(a)ncsu.edu wrote: >> Hi Howard! As much as I hate to say this, it did not solve the problem >> I >> was running into. =( I rebuilt openldap with the entry.c patch and >> rebuilt the LDAP database from scratch (pulling from sources and using >> slapadd). Then I ran the following statement via ldapmodify (as always, >> XXX'd out sensitive info): > > The slapcat output you provide shows that the attribute was already > slapadded > incorrectly. Please provide the "pulling from sources" input you used with > slapadd for this entry. dn: uid=XXX,ou=students,ou=people,dc=ncsu,dc=edu objectClass: person objectClass: inetOrgPerson objectClass: ncsuPerson uid: XXX cn: XXX sn: XXX title: Sophomore ncsuTwoPartName: XXX organizationalStatus: registered o: NC State University gn: XXX ncsuMiddleName: XXX initials: XXX displayName: XXX ncsuAltDisplayName: XXX ncsuCampusID: XXX ncsuClassCode: SO ou: Political Science - Int Politics Conc ncsuCurriculumCode: LIP ou: B A - History ncsuCurriculumCode: LAH mail: XXX ncsuPrimaryEMail: XXX registeredAddress: XXX postalAddress: XXX telephoneNumber: XXX l: Graham st: NC postalCode: XXX ncsuPrimaryRole: student Note that I have not changed anything to add the ou's as a group and the ncsuCurriculumCode's as a group, but from what I understood, this should work fine for openldap, even if it may or may not be truly legit based off the RFCs. And again, I have not changed anything in this code and have been adding things like this for the past 2 years with OpenLDAP 2.2 and earlier. I mean sure I can go edit my code to add those ou's and ncsucurriculumcodes in the correct order (ie, bunched together), but if you are saying openldap should be able to handle this, I'd like to stick with it and see it resolved instead of letting it be a dangling difference behavior since 2.2. If you want to make an official-like statement that what I'm doing there is not proper and not supported, then so be it, I'll take that as golden and adjust my code. =) (in other words, would you rather it be that this is flat out not supported? .. of course if it's not supported it would be nicer if openldap yelled about it instead of accepting it and just being mad afterwards) I moved away from 2.2 because it looks like you all don't support it anymore and I started running into stability problems. (which we have not narrowed down to be OpenLDAP's 'fault'.. just upgrading OpenLDAP was a good first and easy step 1, and actually seems to have helped) Daniel > -- > -- Howard Chu > Chief Architect, Symas Corp. http://www.symas.com > Director, Highland Sun http://highlandsun.com/hyc > OpenLDAP Core Team http://www.openldap.org/project/ >

1 0

Re: (ITS#4822) After test049 is over, restarting the producer dumps core
by ando＠sys-net.it 28 Jan '07

28 Jan '07

> ando(a)sys-net.it wrote: >> ... >> Core was generated by `../../../servers/slapd/slapd -F slapd.d/ -h >> ldap://:9011 >> -s0 -dstats'. > > Recall from > http://www.openldap.org/lists/openldap-devel/200701/msg00077.html > the trick to keep the consumer from starting only works if the providerURI > matches a listenerURI. The providerURI is ldap://localhost:9011 which does > not match what you used here. right, I completely overlooked that :) p.

1 0

Re: (ITS#4822) After test049 is over, restarting the producer dumps core
by hyc＠symas.com 28 Jan '07

28 Jan '07

ando(a)sys-net.it wrote: > Full_Name: Pierangelo Masarati > Version: HEAD > OS: Linux 2.6 (CentOS 4.4) > URL: ftp://ftp.openldap.org/incoming/ > Submission from: (NULL) (81.72.89.40) > Submitted by: ando > > > After test049 is over, restarting the producer dumps core. This happens in the > consumer's code (!) which, as far as I can understand, is there in cn=config > only for the purpose of replicating to the consumer and set it to be, well, a > consumer. > > Same happens when re-starting slapd with the consumer's database. > > The problem is related to the pending CSN being a NULL berval; the assertion > occurs while trying to copy it, since the source of a ber copy cannot be NULL. > If it is correct that pending CSN be NULL, the test must be performed before > calling ber_bvreplace(); otherwise, this needs to be fixed. > > At this point I suggest that test049 includes stopping and restarting both (when > this bug is fixed), re-checking that contents match. > > <producer> > ... > Core was generated by `../../../servers/slapd/slapd -F slapd.d/ -h ldap://:9011 > -s0 -dstats'. Recall from http://www.openldap.org/lists/openldap-devel/200701/msg00077.html the trick to keep the consumer from starting only works if the providerURI matches a listenerURI. The providerURI is ldap://localhost:9011 which does not match what you used here. The other half of this ITS remains to be investigated... > Program terminated with signal 6, Aborted. > ... > (gdb) bt > #0 0x003957a2 in _dl_sysinfo_int80 () from /lib/ld-linux.so.2 > #1 0x00fbf7a5 in raise () from /lib/tls/libc.so.6 > #2 0x00fc1209 in abort () from /lib/tls/libc.so.6 > #3 0x00fb8d91 in __assert_fail () from /lib/tls/libc.so.6 > #4 0x08218a30 in ber_bvreplace_x (dst=0xb6d15ff4, src=0x97ae258, ctx=0x0) > at memory.c:703 > #5 0x080f34d1 in slap_queue_csn (op=0xb6d15f30, csn=0xb6d15bf0) > at ctxcsn.c:167 > #6 0x080e91bc in syncrepl_del_nonpresent (op=0xb6d15f30, si=0x977ea68, > uuids=0x0, cookiecsn=0xb6d15d9c) at syncrepl.c:2097 > #7 0x080e49a0 in do_syncrep2 (op=0xb6d15f30, si=0x977ea68) at syncrepl.c:728 > #8 0x080e58e1 in do_syncrepl (ctx=0xb6d162a4, arg=0x977a008) > at syncrepl.c:1010 > #9 0x081e5948 in ldap_int_thread_pool_wrapper (xpool=0x9701bc8) at tpool.c:704 > #10 0x00692371 in start_thread () from /lib/tls/libpthread.so.0 > #11 0x0105fffe in clone () from /lib/tls/libc.so.6 > </producer> > > <consumer> > ... > Core was generated by `../../../servers/slapd/slapd -F slapd.d/ -h ldap://:9011 > -s0 -dstats'. > Program terminated with signal 6, Aborted. > ... > (gdb) bt > #0 0x003957a2 in _dl_sysinfo_int80 () from /lib/ld-linux.so.2 > #1 0x00f057a5 in raise () from /lib/tls/libc.so.6 > #2 0x00f07209 in abort () from /lib/tls/libc.so.6 > #3 0x00efed91 in __assert_fail () from /lib/tls/libc.so.6 > #4 0x08218a30 in ber_bvreplace_x (dst=0xb6cd7ff4, src=0x8dec878, ctx=0x0) > at memory.c:703 > #5 0x080f34d1 in slap_queue_csn (op=0xb6cd7f30, csn=0xb6cd7bf0) > at ctxcsn.c:167 > #6 0x080e91bc in syncrepl_del_nonpresent (op=0xb6cd7f30, si=0x8db80b0, > uuids=0x0, cookiecsn=0xb6cd7d9c) at syncrepl.c:2097 > #7 0x080e49a0 in do_syncrep2 (op=0xb6cd7f30, si=0x8db80b0) at syncrepl.c:728 > #8 0x080e58e1 in do_syncrepl (ctx=0xb6cd82a4, arg=0x8da5408) > at syncrepl.c:1010 > #9 0x081e5948 in ldap_int_thread_pool_wrapper (xpool=0x8d3fbc8) at tpool.c:704 > #10 0x003cb371 in start_thread () from /lib/tls/libpthread.so.0 > #11 0x00fa5ffe in clone () from /lib/tls/libc.so.6 > </consumer> > > > -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc OpenLDAP Core Team http://www.openldap.org/project/

1 0

(ITS#4822) After test049 is over, restarting the producer dumps core
by ando＠sys-net.it 28 Jan '07

28 Jan '07

Full_Name: Pierangelo Masarati Version: HEAD OS: Linux 2.6 (CentOS 4.4) URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (81.72.89.40) Submitted by: ando After test049 is over, restarting the producer dumps core. This happens in the consumer's code (!) which, as far as I can understand, is there in cn=config only for the purpose of replicating to the consumer and set it to be, well, a consumer. Same happens when re-starting slapd with the consumer's database. The problem is related to the pending CSN being a NULL berval; the assertion occurs while trying to copy it, since the source of a ber copy cannot be NULL. If it is correct that pending CSN be NULL, the test must be performed before calling ber_bvreplace(); otherwise, this needs to be fixed. At this point I suggest that test049 includes stopping and restarting both (when this bug is fixed), re-checking that contents match. <producer> ... Core was generated by `../../../servers/slapd/slapd -F slapd.d/ -h ldap://:9011 -s0 -dstats'. Program terminated with signal 6, Aborted. ... (gdb) bt #0 0x003957a2 in _dl_sysinfo_int80 () from /lib/ld-linux.so.2 #1 0x00fbf7a5 in raise () from /lib/tls/libc.so.6 #2 0x00fc1209 in abort () from /lib/tls/libc.so.6 #3 0x00fb8d91 in __assert_fail () from /lib/tls/libc.so.6 #4 0x08218a30 in ber_bvreplace_x (dst=0xb6d15ff4, src=0x97ae258, ctx=0x0) at memory.c:703 #5 0x080f34d1 in slap_queue_csn (op=0xb6d15f30, csn=0xb6d15bf0) at ctxcsn.c:167 #6 0x080e91bc in syncrepl_del_nonpresent (op=0xb6d15f30, si=0x977ea68, uuids=0x0, cookiecsn=0xb6d15d9c) at syncrepl.c:2097 #7 0x080e49a0 in do_syncrep2 (op=0xb6d15f30, si=0x977ea68) at syncrepl.c:728 #8 0x080e58e1 in do_syncrepl (ctx=0xb6d162a4, arg=0x977a008) at syncrepl.c:1010 #9 0x081e5948 in ldap_int_thread_pool_wrapper (xpool=0x9701bc8) at tpool.c:704 #10 0x00692371 in start_thread () from /lib/tls/libpthread.so.0 #11 0x0105fffe in clone () from /lib/tls/libc.so.6 </producer> <consumer> ... Core was generated by `../../../servers/slapd/slapd -F slapd.d/ -h ldap://:9011 -s0 -dstats'. Program terminated with signal 6, Aborted. ... (gdb) bt #0 0x003957a2 in _dl_sysinfo_int80 () from /lib/ld-linux.so.2 #1 0x00f057a5 in raise () from /lib/tls/libc.so.6 #2 0x00f07209 in abort () from /lib/tls/libc.so.6 #3 0x00efed91 in __assert_fail () from /lib/tls/libc.so.6 #4 0x08218a30 in ber_bvreplace_x (dst=0xb6cd7ff4, src=0x8dec878, ctx=0x0) at memory.c:703 #5 0x080f34d1 in slap_queue_csn (op=0xb6cd7f30, csn=0xb6cd7bf0) at ctxcsn.c:167 #6 0x080e91bc in syncrepl_del_nonpresent (op=0xb6cd7f30, si=0x8db80b0, uuids=0x0, cookiecsn=0xb6cd7d9c) at syncrepl.c:2097 #7 0x080e49a0 in do_syncrep2 (op=0xb6cd7f30, si=0x8db80b0) at syncrepl.c:728 #8 0x080e58e1 in do_syncrepl (ctx=0xb6cd82a4, arg=0x8da5408) at syncrepl.c:1010 #9 0x081e5948 in ldap_int_thread_pool_wrapper (xpool=0x8d3fbc8) at tpool.c:704 #10 0x003cb371 in start_thread () from /lib/tls/libpthread.so.0 #11 0x00fa5ffe in clone () from /lib/tls/libc.so.6 </consumer>

1 0

Re: (ITS#4821) test043 cores; apparently incorrect resource usage
by ando＠sys-net.it 28 Jan '07

28 Jan '07

hyc(a)symas.com wrote: > ando(a)sys-net.it wrote: >> hyc(a)symas.com wrote: >> >>> Working now with patched libldap_r/tpool.c >> But now it leaks a lot at shutdown... > > Sigh, previous patch was missing a line. OK now. Comfirmed. I'll close this ITS. Thanks, p.

1 0

Re: (ITS#4821) test043 cores; apparently incorrect resource usage
by hyc＠symas.com 28 Jan '07

28 Jan '07

ando(a)sys-net.it wrote: > hyc(a)symas.com wrote: > >> Working now with patched libldap_r/tpool.c > > But now it leaks a lot at shutdown... Sigh, previous patch was missing a line. OK now. -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc OpenLDAP Core Team http://www.openldap.org/project/

1 0

Re: (ITS#4817) modify "replace" command firing conflict error where it shouldn't be
by hyc＠symas.com 27 Jan '07

27 Jan '07

daniel(a)ncsu.edu wrote: > Hi Howard! As much as I hate to say this, it did not solve the problem I > was running into. =( I rebuilt openldap with the entry.c patch and > rebuilt the LDAP database from scratch (pulling from sources and using > slapadd). Then I ran the following statement via ldapmodify (as always, > XXX'd out sensitive info): The slapcat output you provide shows that the attribute was already slapadded incorrectly. Please provide the "pulling from sources" input you used with slapadd for this entry. -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc OpenLDAP Core Team http://www.openldap.org/project/

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openldap-bugs