openldap-bugs

openldap-bugs@openldap.org

1 participants
20958 discussions

Re: (ITS#4921) back-config and included ACLs
by hyc＠symas.com 10 Apr '07

10 Apr '07

ghenry(a)suretecsystems.com wrote: > Full_Name: Gavin Henry > Version: 2.3.35 > OS: Fedora Core 6 > URL: ftp://ftp.openldap.org/incoming/ > Submission from: (NULL) (212.159.59.85) > > > Dear All, > > Minor issue. When including an acl file, this acl file appears in cn=schema: > > dn: cn=include{8},cn=config > objectClass: olcIncludeFile > cn: include{8} > olcInclude: /usr/local/etc/openldap/suretec.acl > > Shows as: > > dn: cn={8}suretec,cn=schema,cn=config > objectClass: olcSchemaConfig > cn: {8}suretec > > I don't think this should show in the schema tree. Indeed. It's only supposed to show up there if it actually contained any schema directives. Oops. > > Thanks, > > Gavin. > > > . > -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

(ITS#4923) back-config and olcModuleLoad kills slapd
by ghenry＠suretecsystems.com 10 Apr '07

10 Apr '07

Full_Name: Gavin Henry Version: 2.3.35 OS: Fedora Core 6 URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (212.159.59.85) Dear All, I know you can add modules like: dn: cn=module{0},cn=config objectClass: olcModuleList cn: module{0} olcModuleLoad: /usr/local/lib/smbk5pwd.la dn: cn=module{1},cn=config objectClass: olcModuleList cn: module{1} olcModulePath: /usr/local/lib:/usr/local/lib/slapd olcModuleLoad: accesslog.la olcModuleLoad: pcache.la But when migrating from slapd.conf, they get listed as: dn: cn=module{0},cn=config olcModuleLoad: {0}back_hdb.la olcModuleLoad: {1}accesslog.la olcModuleLoad: {2}syncprov.la olcModuleLoad: {3}back_monitor.la I am trying to add the smbk5pwd module like so: dn: cn=module{0},cn=config changetype: modify replace: olcModuleLoad olcModuleLoad: {0}back_hdb.la olcModuleLoad: {1}accesslog.la olcModuleLoad: {2}syncprov.la olcModuleLoad: {3}back_monitor.la olcModuleLoad: {4}smbk5pwd.la Command: ldapmodify -d 1 -x -D "cn=config" -W -f /home/ghenry/Desktop/smb.ldif -ZZ ldapmodify excepts the above LDIF. But slapd dies: Program received signal SIGABRT, Aborted. [Switching to Thread -1558062192 (LWP 24587)] 0x00bfd402 in __kernel_vsyscall () (gdb) bt #0 0x00bfd402 in __kernel_vsyscall () #1 0x0026ad40 in raise () from /lib/libc.so.6 #2 0x0026c591 in abort () from /lib/libc.so.6 #3 0x0026438b in __assert_fail () from /lib/libc.so.6 #4 0x080a26ce in slap_bv2ad () #5 0x080a33c0 in slap_str2ad () #6 0x08060f81 in init_config_attrs () #7 0x0805f7e7 in config_register_schema () #8 0x004db1e3 in hdb_back_init_cf (bi=0x4f8960) at config.c:695 #9 0x004d755d in hdb_back_initialize (bi=0x4f8960) at init.c:683 #10 0x08075e6b in backend_add () #11 0x004d7328 in init_module (argc=0, argv=0x0) at init.c:693 #12 0x080aec33 in module_load () #13 0x0805abd6 in str2loglevel () #14 0x080611e2 in config_set_vals () #15 0x0806310d in config_parse_add () #16 0x0805d899 in str2loglevel () #17 0x0807f89b in fe_op_modify () #18 0x080800d8 in do_modify () #19 0x08068bd9 in connection2anonymous () #20 0x0099260d in ldap_int_thread_pool_wrapper (xpool=0xa3c1ffd8) at tpool.c:478 #21 0x006e63db in start_thread () from /lib/libpthread.so.0 #22 0x0030f26e in clone () from /lib/libc.so.6 Is this a LDIF format issue on my part? Thanks, Gavin.

1 0

(ITS#4922) test_filter problem on uid filter
by juritanganelli＠gmail.com 10 Apr '07

10 Apr '07

Full_Name: juri tanganelli Version: 2.3.27 OS: Red Hat EL 3 URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (195.7.19.10) I have developed a custom backend that uses the test_filter function to determine if an entry is matching a given input filter. Filter on any of the entry attribute but Uid works fine. When i specify i filter on the uid attribute i get very strange results for example: - when i use the complete value of the attribute such as uid=e497004 no result is returned, but there is an entry with that value. - when i use some regular expressions the result is correclty such as uid=e* the corresponding entry is correctly returned. Regards, Juri

1 0

(ITS#4921) back-config and included ACLs
by ghenry＠suretecsystems.com 10 Apr '07

10 Apr '07

Full_Name: Gavin Henry Version: 2.3.35 OS: Fedora Core 6 URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (212.159.59.85) Dear All, Minor issue. When including an acl file, this acl file appears in cn=schema: dn: cn=include{8},cn=config objectClass: olcIncludeFile cn: include{8} olcInclude: /usr/local/etc/openldap/suretec.acl Shows as: dn: cn={8}suretec,cn=schema,cn=config objectClass: olcSchemaConfig cn: {8}suretec I don't think this should show in the schema tree. Thanks, Gavin.

1 0

Re: (ITS#4920) bad connection sequencing
by hyc＠symas.com 10 Apr '07

10 Apr '07

h.b.furuseth(a)usit.uio.no wrote: > Full_Name: Hallvard B Furuseth > Version: HEAD > OS: Linux > URL: http://folk.uio.no/hbf/OpenLDAP/bug032.tgz > Submission from: (NULL) (129.240.202.105) > Submitted by: hallvard > > > Statslog() from even successful tests can show strange sequencing. > > grep '^conn=' testrun/slapd.*.log from a test032-chain run shows > - Operations logged on connections before ACCEPT > (slapd.1.log conn=2,3 + slapd.2.log conn=7,9) > - Operations on a connection with no ACCEPT (slapd.1.log conn=10), > but a 'conn=-1 fd=21 ACCEPT' _after_ that fd's 'close', > and valgrind shows memory errors between the close and the ACCEPT. > The enclosed URL gives the testrun directory and test output. Haven't looked at that yet. > Similar things show up in other tests. A test019 run with a > conn=-1 ACCEPT did not get valgrind memory compaints though. > grep 'conn=-1' testrun/slapd.*.log also found a number of > send_ldap_result: conn=-1 op=0 p=<0 or 3> > even in logs without any conn=-1, but maybe that's a "fake > connection"? Don't know why results are sent though. send_ldap_result is always logged, since it occurs before callback processing. So even if it's an internal op with a null callback, it will get logged. -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

(ITS#4920) bad connection sequencing
by h.b.furuseth＠usit.uio.no 09 Apr '07

09 Apr '07

Full_Name: Hallvard B Furuseth Version: HEAD OS: Linux URL: http://folk.uio.no/hbf/OpenLDAP/bug032.tgz Submission from: (NULL) (129.240.202.105) Submitted by: hallvard Statslog() from even successful tests can show strange sequencing. grep '^conn=' testrun/slapd.*.log from a test032-chain run shows - Operations logged on connections before ACCEPT (slapd.1.log conn=2,3 + slapd.2.log conn=7,9) - Operations on a connection with no ACCEPT (slapd.1.log conn=10), but a 'conn=-1 fd=21 ACCEPT' _after_ that fd's 'close', and valgrind shows memory errors between the close and the ACCEPT. The enclosed URL gives the testrun directory and test output. Similar things show up in other tests. A test019 run with a conn=-1 ACCEPT did not get valgrind memory compaints though. grep 'conn=-1' testrun/slapd.*.log also found a number of send_ldap_result: conn=-1 op=0 p=<0 or 3> even in logs without any conn=-1, but maybe that's a "fake connection"? Don't know why results are sent though.

1 0

Re: (ITS#4919) Why CPU usage can not reach 100% while doing modify operation?
by hyc＠symas.com 09 Apr '07

09 Apr '07

The ITS is for tracking bug reports and enhancement requests. I don't see a bug report here. Try asking your question on the OpenLDAP-software mailing list. This ITS will be closed. seuler(a)163.com wrote: > Full_Name: Seuler Shi > Version: openldap-2.3.30 > OS: SUSE 9 > URL: ftp://ftp.openldap.org/incoming/ > Submission from: (NULL) (194.138.202.50) > > > When I do the search operation, the CPU usage of OpenLDAP Server can reach 100% > when the number of search operations per second arise? But for the modify > operation, > the CPU usage can only reach 87% at most? > > What is the bottleneck that makes OpenLDAP can not make CPU recource fully while > > doing modify operation? -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

(ITS#4919) Why CPU usage can not reach 100% while doing modify operation?
by seuler＠163.com 09 Apr '07

09 Apr '07

Full_Name: Seuler Shi Version: openldap-2.3.30 OS: SUSE 9 URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (194.138.202.50) When I do the search operation, the CPU usage of OpenLDAP Server can reach 100% when the number of search operations per second arise? But for the modify operation, the CPU usage can only reach 87% at most? What is the bottleneck that makes OpenLDAP can not make CPU recource fully while doing modify operation?

1 0

Re: (ITS#4916) syncrpl consumer not listing contextcsn as operation attr
by brian＠zimbra.com 06 Apr '07

06 Apr '07

thanks, that worked, this case can be closed. Brian Peterson On Apr 6, 2007, at 1:58 PM, Howard Chu wrote: > brian(a)zimbra.com wrote: >> Full_Name: Brian Peterson >> Version: 2.3.34 >> OS: Linux >> URL: pro >> Submission from: (NULL) (66.92.25.194) >> When setup sync replication the contextCSN is available via >> ldapsearch on the >> provider but not the consumer as an operation attribute. If we do >> a slapcat on >> the consumer the resulting ldif contains the contextCSN. > > This is because your context entry has no DN, it's a glue entry. > When you do a search on it you get the contents of the server > rootDSE instead of your glue entry. The search works on the > provider because the syncprov overlay intercepts searches to insert > the current contextCSN value in the result. You can add a syncprov > overlay to the consumer to get the same effect. > >> Top entry from slapcat ldif on the consumer. >> dn: >> objectClass: glue >> structuralObjectClass: glue >> contextCSN: 20070405182202Z#000000#00#000000 >> entryCSN: 20070405182202Z#000000#00#000000 >> modifiersName: uid=zimbra,cn=admins,cn=zimbra >> modifyTimestamp: 20070405182202Z > > > -- > -- Howard Chu > Chief Architect, Symas Corp. http://www.symas.com > Director, Highland Sun http://highlandsun.com/hyc/ > Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

Re: (ITS#4918) int = pointer assignment in syncrepl
by hyc＠symas.com 06 Apr '07

06 Apr '07

h.b.furuseth(a)usit.uio.no wrote: > Full_Name: Hallvard B Furuseth > Version: RE23 > OS: > URL: > Submission from: (NULL) (129.240.202.105) > Submitted by: hallvard > > > In RE23:syncrepl.c:do_syncrepl() lin 1155, the statement > fail = si->si_retrynum; > assigns an int* to an int. > > > . > Thanks, fixed. -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openldap-bugs