openldap-bugs

openldap-bugs@openldap.org

1 participants
20959 discussions

Re: (ITS#4943) tpool.c pause vs. finish
by h.b.furuseth＠usit.uio.no 29 May '07

29 May '07

Some more comments, review, planned changes, and questions. I guess I should summarize the bugs I've fixed in HEAD first, for completeness. (I was a bit too busy at the time.) Restating the CVS log comments, nothing new but maybe a bit clearer. Possibly some of the issues are tpool-only issues and can't happen the way slapd uses tpool. ---------------------------------------- rev 1.63: ldap_pvt_thread_pool_submit(), after failed thread creation: - ltp_pending_count++ should be --. - should signal if there are no more threads, in case pool_destroy() is waiting for that. (Not sure if that can happen.) ldap_int_thread_pool_wrapper(): - The 'if(ltp_state...)' was spurious: It would always be true, and if it were not we'd get an eternal loop. rev 1.64: pool_pause(): - would cancel states FINISHING and STOPPING, pool_resume() would set it back to RUNNING. - could hang when waiting for another pool_pause(), since it did not signal ltp_pcond if it decremented ltp_active_count to 1. pool_wrapper(): - could update thread_keys[] during a pause while initializing and possibly while finishing, - just after initializing, could handle a new ctx during a pause. pool_destroy(): - would go on with destruction if pool_resume() was called, since it used an if(){wait} instead of while() and they use the same cond. rev 1.65: - pool_context() read thread_keys[] without mutex protection. pool_purgekey() too, but it expected a pause to protect the keys. pool_wrapper() protected with ltp_mutex while writing, and did not quite ensure a pause. rev 1.66: - thread_keys[] is a (poor) open-addessed hash table, but it lacked a "deleted item" mark. So keys (contexts) could become hidden and re-emerge later if threads exited and then new ones were started. - TID_HASH() did hash calculation in signed arithmetic, thus depending on friendly integer overflow. rev 1.67: - setkey/getkey expected ldap_int_thread_userctx_t.ltu_key[] to be NULL-terminated when not full. purgekey() could set a NULL in the middle, hiding later keys until a new key overwrote the NULL. API changes: - setkey(data=NULL, kfree!=NULL) searched as if intended to reset the key, but updated by setting the key. Now always updates. - setkey(key=<not found>, data=NULL) could return either success or failure. Now succeeds iff (data == NULL && kfree == NULL). rev 1.68: - ltp_max_count <= 0 meant allow an unlimited number of threads, but thread #LDAP_MAXTHR+1 and later would loop forever looking for a free thread_keys[] slot. (Not fixed for multi-pool applications.) ---------------------------------------- I wrote in the tpool.c 1.66 -> 1.67 patch: > API changes, need review - I'm not sure what's indented here: > - setkey(data=NULL, kfree!=NULL) searched as if intended to reset > the key, but updated by setting the key. Now always updates. Right. That matches the one place it can happen: In bdb_locker_id() with setkey(,,data=(void *)(long)lockid,). I don't know if lockid can be 0, but it doesn't need to for data to be NULL. But it would cleaner to ch_malloc an integer instead of the (void*) cast. Then it won't depend on integer->pointer->integer conversions preserving the value either. BTW, is there a reason for the cast to long? lockid is u_int32_t, and the getkey 'long' result is restored to a u_int32_t. Howard Chu wrote: >> Also if ctx is invalid (another thread handled it) and a new >> pending request has gotten the now-unused ctx, then the >> 'if (pool->ltp_open_count == 0)' code will free that new >> pending request instead of the old one. > > Most likely this is due to unlocking and relocking the mutex around > the semaphore code. Axe that, remove the gratuitous unlock/relock, > and then that problem goes away. Was that an instruction/permission to axe it or not? If not I'll just move the unlock/lock into the #ifdef for now. > Thus far we've only had to worry about a single pool. If anyone can > come up with a reason to need multiple pools, I guess we need to > hear it. I'll insert "static int initialized; assert(!initialized++);" in pool_init() and see if anyone complains. >> - setkey does not free the old data with ltk_free. Possibly that's >> intentional, but if so that requires weird code elsewhere. > > Yes, that's intentional. ltk_free is only intended for cleanup if a key > is still set by the time a thread exits. All of the keys we set are live > for the entire life of a thread, they don't get re-assigned. Even the (void*)slap_sasl_bind key? lutil_passwd() looks like it can be recursive: Register a password scheme which finds an entry in LDAP and authenticates via that entry's userPassword - which again could call lutil_passwd(). If that's legal, this code in be_isroot_pw()/slap_passwd_check() can break: pool_setkey(, slap_sasl_bind, <ctx>, <freefunc> ); ... /* slap_passwd_check() does access_allowed() here */ lutil_passwd(); ... pool_setkey(, slap_sasl_bind, NULL, NULL); The final setkey would need to restore the old key. I'm not sure of contrib/slapd-modules/smbk5pwd/smbk5pwd.c + some overlay either. rwm + back-relay which uses another smbk5pwd or something. (And I have no idea of the BDB cache stuff, but since you wrote it I assume you know:-) If it's a problem, we can replace code like that with void *data = <ctx>; ldap_pvt_thread_pool_keyfree_t *kfree = <freefunc>; pool_swapkey(, slap_sasl_bind, &data, &kfree ); /* new function */ lutil_passwd(); pool_setkey(, slap_sasl_bind, data, kfree ); or if setkey reverts to ignoring kfree when it checks whether we are setting or deleting a key, the kfree function can be passed directly. I wrote: > But this reminds me: How much should an ltk_free() function be allowed > to do? > - pool_context_reset() calls ltk_free(). Should pool_wrapper() go > active (wait for !pause, increment ltp_active_count, unlock ltp_mutex) > before calling pool_context_reset()? I think so. It makes slapi safer, and I don't see that it can hurt: context_reset() can call connection_fake_destroy(), which via slapi_int_free_object_extensions() calls slapi module destructors, which can do who-knows-what. Another stray thought: It would similarly be safer for context_reset() and purgekey() to delete the key before calling ltk_free, so that function can't access the key's data after freeing it. OTOH that would break any slapi module whose ltk_free calls a function which uses the key before freeing it. I'll leave it alone unless someone says otherwise. Other matters: pool->ltp_active_list is maintained but not used for anything. Do I delete it? Or does tpool maintain the list to ease debugging? Use of tpool: Another bug: Slapd does not always check if pool_submit() and pool_setkey() succeed, even though failure is not a bug. (They can run into some limits.) I do not understand the calls to ldap_pvt_thread_pool_context_reset() in slapd (init.c and bconfig.c). That frees the thread's sl_malloc memory with slap_sl_mem_destroy(), which seems rather hazardous until the thread is really, really done. For that matter, I guess that means context_reset() had better release keys in the reverse order of how they were set. That usually happened, but not always, and my clear_key_idx() made the "not always" more common. So to close the gap from a deleted key I'll make it move all later keys forward, instead of just moving the latest key to the gap. Bdb uses the database environment address as a key to pool_setkey(). So there can be at most ~30 BDB databases with an active key at the same time in the same thread. What does that mean - 30 overlays all using bdb? Access control groups spanning 30 databases? Nitpick: Slapd uses both function pointers and data pointers as keys to pool_[sg]etkey(). That makes it possible for two "different" keys to compare equal, on a host where functions and data live in different segments that otherwise share the same address space. So I guess I should clean up and replace (void*)<function> keys with the address of static char <function>_key; -- Regards, Hallvard

1 0

Re: (ITS#4951) [contrib] RADIUS password module fixes
by richton＠nbcs.rutgers.edu 29 May '07

29 May '07

Boy, that was some real quality time with dbx...ugh. I'm fairly confident that the issue is that portable.h isn't included and should have been as part of my patch. This worked in a development environment; I'll be putting it through some more tests and, most likely, in production soon (the =NULL workaround is just a time bomb). On Thu, 24 May 2007, Aaron Richton wrote: > On Tue, 22 May 2007, Pierangelo Masarati wrote: >> If that's an issue, I have no problem in explicitly setting that pointer >> to NULL. > > I got some more dbx time on this, and it looks like that's a workaround for > something that shouldn't be happening/needs to be fixed anyway. > config_filename is always NULL at dlopen() time, just as it should be. > > Calling lock(&libradius_mutex) apparently overwrites config_filename, and > explicitly initializing to NULL somehow stops this from happening. I can't > see anything wrong with radius.c (as in HEAD), though; if anybody can weigh > in on this, it'd be much appreciated. I suppose it could still be a compiler > or a libthread bug, but I'm still missing a smoking gun here. > >

1 0

Re: (ITS#4985) pthread.h: present but cannot be compiled
by maugustine＠phsyes.com 29 May '07

29 May '07

This is a multi-part message in MIME format. ------=_NextPart_000_0004_01C7A1C1.FB9C6800 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit For those of you that may have this same issue, I discovered that the problem was with gcc version 4.0.0 that loads with AIX 5.3. After I upgraded to 4.1.1, this problem went away. ------=_NextPart_000_0004_01C7A1C1.FB9C6800 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns=3D"http://www.w3.org/TR/REC-html40"> <head> <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Dus-ascii"> <meta name=3DGenerator content=3D"Microsoft Word 11 (filtered medium)"> <style>  </style> </head> <body lang=3DEN-US link=3Dblue vlink=3Dpurple> <div class=3DSection1> <p class=3DMsoNormal><font size=3D2 face=3DArial><span = style=3D'font-size:10.0pt; font-family:Arial'>For those of you that may have this same issue, I = discovered that the problem was with gcc version 4.0.0 that loads with AIX = 5.3.  After I upgraded to 4.1.1, this problem went away.<o:p></o:p></span></font></p> </div> </body> </html> ------=_NextPart_000_0004_01C7A1C1.FB9C6800--

1 0

(ITS#4987) imporvement to slapo-constraint
by manu＠netbsd.org 29 May '07

29 May '07

Full_Name: Emmanuel Dreyfus Version: 4.4.4 OS: NetBSD URL: ftp://ftp.openldap.org/incoming/manu-070529.ext Submission from: (NULL) (213.41.141.172) I modified slapo-constraint so that it can verify that an attribute value is bound to the existing values of another attribute. The purpose is to make referential integrity easier to obtain. Attached is a draft patch for review. Then there is the UI question. For now it's configured in slapd.conf like this: database bdb suffix "dc=example,dc=net" overlay constraint constraint_attribute title key netExampleTitle Which means that add and modify on title will fail if the new value is not an existing netExampleTitle value. I used the keyword "key" with RDBMS referential integrity in mind, but I'm not sure it's that clear in this context. Suggestions are welcome. The update to man page is missing yet. I know. Also, I had trouble understanding the style used in these sources. Is there an official style guide for OpenLDAP?

1 0

(ITS#4986) manageDSAit might control cause problems in database selection
by nvoutsin＠noc.uoa.gr 28 May '07

28 May '07

Full_Name: Nikos Voutsinas Version: 2.3.35 OS: Solaris 9 URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (195.134.100.207) With the following configuration, search operations in the local database ("dc=foo,dc=bar") will fail when manageDSAit control is set. .... .... backend bdb database bdb suffix "dc=foo,dc=bar" rootdn "uid=manager,dc=foo,dc=bar" rootpw "secret" directory /var/openldap/bdb access to * by * read database relay suffix "" relay "dc=foo,dc=bar" massage access to * by * read .... .... The problem has been tracked down in select_backend().

1 0

(ITS#4985) pthread.h: present but cannot be compiled
by maugustine＠phsyes.com 25 May '07

25 May '07

Full_Name: Matt Augustine Version: 2.3.32 OS: AIX 5.3 URL: Submission from: (NULL) (208.8.86.2) Dear help, I have currently installed openssl-0.9.8e and am looking to install openldap-2.3.32 on AIX 5.3. However, when I go to run the configure script it ends with the following warning: pthread.h: present but cannot be compiled / check for missing prerequisite headers? / see the Autoconf documentation secion "Present But cannot Be Compiled" proceeing with the preprocessor's result / in the future, the compiler will take precedence / Report this to <http://www.openldap.org/its/> I then went to check the config.log and tied it to the following errors: /usr/include/pthread.h:666: error: parse error before '*' token /usr/include/pthread.h:669: error: parse error before '*' token /usr/include/pthread.h:672: error: parse error before '*' token /usr/include/pthread.h:675: error: parse error before '*' token /usr/include/pthread.h:678: error: parse error before '*' token /usr/include/pthread.h:686: error: parse error before '*' token /usr/include/pthread.h:689: error: parse error before '*' token /usr/include/pthread.h:692: error: parse error before '*' token /usr/include/pthread.h:695: error: parse error before '*' token /usr/include/pthread.h:703: error: parse error before '*' token /usr/include/pthread.h:707: error: parse error before '*' token /usr/include/pthread.h:710: error: parse error before '*' token Those lines in pthread.h correspond to the following: 666: pthread_spin_init __((pthread_spinlock_t *, int)); 669: pthread_spin_destroy __((pthread_spinlock_t *)); 672: pthread_spin_lock __((pthread_spinlock_t *)); 675: pthread_spin_unlock __((pthread_spinlock_t *)); 678: pthread_spin_trylock __((pthread_spinlock_t *)); 686: pthread_barrierattr_init __((pthread_barrierattr_t *)); 689: pthread_barrierattr_destroy __((pthread_barrierattr_t *)); 692: pthread_barrierattr_getpshared __((const pthread_barrierattr_t *__restrict__, int *__restrict__)); 695: pthread_barrierattr_setpshared __((pthread_barrierattr_t *, int)); 703: pthread_barrier_init __((pthread_barrier_t *__restrict__, const pthread_barrierattr_t *__restrict__, unsigned)); 707: pthread_barrier_destroy __((pthread_barrier_t *)); 710: pthread_barrier_wait __((pthread_barrier_t *)); Unfortunately, I'm fairly new to AIX, and building things from source, so these lines really don't mean much to me. Any help that you can provide would be greatly appreciated. Thanks!

1 0

Re: (ITS#4966) OpenLDAP 2.3.35 crashes on valsort overlay
by hyc＠symas.com 24 May '07

24 May '07

eagle(a)windlord.stanford.edu wrote: > We've reproduced the crash and I have it in a crashed state in gdb right > now. Should be fixed now in valsort.c in HEAD. > > Program received signal SIGSEGV, Segmentation fault. > [Switching to Thread 1107294576 (LWP 32735)] > valsort_modify (op=0x2aabaeae0058, rs=0x41ffef10) at valsort.c:455 > 455 for (i=0; !BER_BVISNULL( &ml->sml_values[i] ); i++) { > (gdb) bt > #0 valsort_modify (op=0x2aabaeae0058, rs=0x41ffef10) at valsort.c:455 > #1 0x0000000000478a2a in overlay_op_walk (op=0x2aabaeae0058, rs=0x41ffef10, > which=op_modify, oi=0x2b240a786518, on=0x2b240a786cd8) at backover.c:498 > #2 0x0000000000478e65 in over_op_func (op=0x2aabaeae0058, rs=0x41ffef10, > which=op_modify) at backover.c:560 > #3 0x000000000043c962 in fe_op_modify (op=0x2aabaeae0058, rs=0x41ffef10) > at modify.c:395 > #4 0x000000000043d45a in do_modify (op=0x2aabaeae0058, rs=0x41ffef10) > at modify.c:200 > #5 0x0000000000427af9 in connection_operation (ctx=Variable "ctx" is not available. > ) at connection.c:1133 > #6 0x0000000000427fa4 in connection_read_thread (ctx=0x41fff060, argv=Variable "argv" is not available. > ) > at connection.c:1261 > #7 0x00002b2408673894 in ldap_int_thread_pool_wrapper (xpool=0x2b2409d10058) > at tpool.c:478 > #8 0x00002b24083ad9af in startMeUp () from /usr/local/lib/libhoard.so > #9 0x00002b24090bfb55 in start_thread () from /lib/libpthread.so.0 > #10 0x00002b24092a07f0 in clone () from /lib/libc.so.6 > [...] > (gdb) frame 0 > #0 valsort_modify (op=0x2aabaeae0058, rs=0x41ffef10) at valsort.c:455 > 455 for (i=0; !BER_BVISNULL( &ml->sml_values[i] ); i++) { > (gdb) list > 450 if ( ml->sml_desc == vi->vi_ad ) > 451 break; > 452 } > 453 if ( !ml ) > 454 continue; > 455 for (i=0; !BER_BVISNULL( &ml->sml_values[i] ); i++) { > 456 ptr = ber_bvchr(&ml->sml_values[i], '{' ); > 457 if ( !ptr ) { > 458 Debug(LDAP_DEBUG_TRACE, "weight missing from attribute %s\n", > 459 vi->vi_ad->ad_cname.bv_val, 0, 0); > (gdb) print *ml > $2 = {sml_mod = {sm_op = 1, sm_flags = 0, sm_desc = 0x2b2409a344d0, sm_type = { > bv_len = 20, bv_val = 0x2aabaea1f8e9 "suorgcontactstanford"}, > sm_values = 0x0, sm_nvalues = 0x0}, sml_next = 0x2aabaeaf4770} > (gdb) print i > No symbol "i" in current context. > (gdb) print ml->sml_mod.sm_values > $3 = 0x0 > > I'll leave it running in gdb so that I can find additional information for > you as needed. > > > -- -- Howard Chu Chief Architect, Symas Corp. Director, Highland Sun http://www.symas.com http://highlandsun.com/hyc Symas: Premier OpenSource Development and Support

1 0

Re: (ITS#4966) OpenLDAP 2.3.35 crashes on valsort overlay
by eagle＠windlord.stanford.edu 24 May '07

24 May '07

Here are the logs of the connection that led to the crash. We think that it may be attempting a delete after the last logged MOD, but so far we haven't been able to get any more detailed information from the authors of the application making the change. May 24 14:34:01 ldap-test0 slapd[32729]: conn=13 op=0 BIND dn="" method=163 May 24 14:34:01 ldap-test0 slapd[32729]: conn=13 op=0 RESULT tag=97 err=14 text= May 24 14:34:01 ldap-test0 slapd[32729]: conn=13 op=1 BIND dn="" method=163 May 24 14:34:01 ldap-test0 slapd[32729]: conn=13 op=1 RESULT tag=97 err=14 text= May 24 14:34:01 ldap-test0 slapd[32729]: conn=13 op=2 BIND dn="" method=163 May 24 14:34:01 ldap-test0 slapd[32729]: conn=13 op=2 BIND authcid="service/slog-org(a)stanford.edu" authzid="service/slog-org(a)stanford.edu" May 24 14:34:01 ldap-test0 slapd[32729]: conn=13 op=2 BIND dn="cn=slog-org,cn=service,cn=applications,dc=stanford,dc=edu" mech=GSSAPI ssf=56 May 24 14:34:01 ldap-test0 slapd[32729]: conn=13 op=2 RESULT tag=97 err=0 text= May 24 14:34:01 ldap-test0 slapd[32729]: conn=13 op=3 SRCH base="" scope=0 deref=3 filter="(objectClass=*)" May 24 14:34:01 ldap-test0 slapd[32729]: conn=13 op=3 SRCH attr=subschemasubentry May 24 14:34:01 ldap-test0 slapd[32729]: conn=13 op=3 SEARCH RESULT tag=101 err=0 nentries=1 text= May 24 14:34:01 ldap-test0 slapd[32729]: conn=13 op=4 SRCH base="cn=Subschema" scope=0 deref=3 filter="(objectClass=subschema)" May 24 14:34:01 ldap-test0 slapd[32729]: conn=13 op=4 SRCH attr=objectClasses attributeTypes matchingRules ldapSyntaxes objectClass javaSerializedData javaClassName javaFactory javaCodeBase javaReferenceAddress javaClassNames javaRemoteLocation May 24 14:34:01 ldap-test0 slapd[32729]: conn=13 op=4 SEARCH RESULT tag=101 err=0 nentries=1 text= May 24 14:34:02 ldap-test0 slapd[32729]: conn=12 op=5 ABANDON msg=5 May 24 14:34:08 ldap-test0 slapd[32729]: conn=13 op=5 SRCH base="cn=organizations,dc=stanford,dc=edu" scope=0 deref=3 filter="(objectClass=*)" May 24 14:34:08 ldap-test0 slapd[32729]: conn=13 op=5 SEARCH RESULT tag=101 err=0 nentries=1 text= May 24 14:34:08 ldap-test0 slapd[32729]: conn=13 op=6 SRCH base="cn=organizations,dc=stanford,dc=edu" scope=1 deref=3 filter="(suRegID=dab33c07fe4f5bee9901a10446424016)" May 24 14:34:08 ldap-test0 slapd[32729]: conn=13 op=6 SEARCH RESULT tag=101 err=0 nentries=1 text= May 24 14:34:08 ldap-test0 slapd[32729]: conn=13 op=7 SRCH base="cn=organizations,dc=stanford,dc=edu" scope=0 deref=3 filter="(objectClass=*)" May 24 14:34:08 ldap-test0 slapd[32729]: conn=13 op=7 SEARCH RESULT tag=101 err=0 nentries=1 text= May 24 14:34:08 ldap-test0 slapd[32729]: conn=13 op=8 MOD dn="suRegID=dab33c07fe4f5bee9901a10446424016,cn=organizations,dc=stanford,dc=edu" May 24 14:34:08 ldap-test0 slapd[32729]: conn=13 op=8 MOD attr=sugeneralid suseealsoorgregid suorgcontactstanford May 24 14:34:09 ldap-test0 slapd[32729]: conn=13 op=8 RESULT tag=103 err=0 text= May 24 14:34:11 ldap-test0 slapd[32729]: conn=13 op=9 SRCH base="cn=organizations,dc=stanford,dc=edu" scope=0 deref=3 filter="(objectClass=*)" May 24 14:34:11 ldap-test0 slapd[32729]: conn=13 op=9 SEARCH RESULT tag=101 err=0 nentries=1 text= May 24 14:34:11 ldap-test0 slapd[32729]: conn=13 op=10 SRCH base="cn=organizations,dc=stanford,dc=edu" scope=1 deref=3 filter="(suRegID=dab33c07fe4f5bee9901a10446424016)" May 24 14:34:11 ldap-test0 slapd[32729]: conn=13 op=10 SEARCH RESULT tag=101 err=0 nentries=1 text= May 24 14:34:12 ldap-test0 slapd[32729]: conn=13 op=11 SRCH base="cn=organizations,dc=stanford,dc=edu" scope=0 deref=3 filter="(objectClass=*)" May 24 14:34:12 ldap-test0 slapd[32729]: conn=13 op=11 SEARCH RESULT tag=101 err=0 nentries=1 text= May 24 14:34:12 ldap-test0 slapd[32729]: conn=13 op=12 SRCH base="cn=organizations,dc=stanford,dc=edu" scope=1 deref=3 filter="(suRegID=41559190986611d3acf6ab400b0baa77)" May 24 14:34:12 ldap-test0 slapd[32729]: conn=13 op=12 SEARCH RESULT tag=101 err=0 nentries=1 text= May 24 14:34:12 ldap-test0 slapd[32729]: conn=13 op=13 SRCH base="cn=organizations,dc=stanford,dc=edu" scope=0 deref=3 filter="(objectClass=*)" May 24 14:34:12 ldap-test0 slapd[32729]: conn=13 op=13 SEARCH RESULT tag=101 err=0 nentries=1 text= May 24 14:34:12 ldap-test0 slapd[32729]: conn=13 op=14 MOD dn="suRegID=41559190986611d3acf6ab400b0baa77,cn=organizations,dc=stanford,dc=edu" May 24 14:34:12 ldap-test0 slapd[32729]: conn=13 op=14 MOD attr=suorgcontactlabelstanford eduorghomepageuri telephonenumber sugworgaddress facsimiletelephonenumber street postaladdress suorgcontactstanford suprintsection labeleduri sugeneralid and then crash.

1 0

Re: (ITS#4966) OpenLDAP 2.3.35 crashes on valsort overlay
by eagle＠windlord.stanford.edu 24 May '07

24 May '07

We've reproduced the crash and I have it in a crashed state in gdb right now. Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 1107294576 (LWP 32735)] valsort_modify (op=0x2aabaeae0058, rs=0x41ffef10) at valsort.c:455 455 for (i=0; !BER_BVISNULL( &ml->sml_values[i] ); i++) { (gdb) bt #0 valsort_modify (op=0x2aabaeae0058, rs=0x41ffef10) at valsort.c:455 #1 0x0000000000478a2a in overlay_op_walk (op=0x2aabaeae0058, rs=0x41ffef10, which=op_modify, oi=0x2b240a786518, on=0x2b240a786cd8) at backover.c:498 #2 0x0000000000478e65 in over_op_func (op=0x2aabaeae0058, rs=0x41ffef10, which=op_modify) at backover.c:560 #3 0x000000000043c962 in fe_op_modify (op=0x2aabaeae0058, rs=0x41ffef10) at modify.c:395 #4 0x000000000043d45a in do_modify (op=0x2aabaeae0058, rs=0x41ffef10) at modify.c:200 #5 0x0000000000427af9 in connection_operation (ctx=Variable "ctx" is not available. ) at connection.c:1133 #6 0x0000000000427fa4 in connection_read_thread (ctx=0x41fff060, argv=Variable "argv" is not available. ) at connection.c:1261 #7 0x00002b2408673894 in ldap_int_thread_pool_wrapper (xpool=0x2b2409d10058) at tpool.c:478 #8 0x00002b24083ad9af in startMeUp () from /usr/local/lib/libhoard.so #9 0x00002b24090bfb55 in start_thread () from /lib/libpthread.so.0 #10 0x00002b24092a07f0 in clone () from /lib/libc.so.6 [...] (gdb) frame 0 #0 valsort_modify (op=0x2aabaeae0058, rs=0x41ffef10) at valsort.c:455 455 for (i=0; !BER_BVISNULL( &ml->sml_values[i] ); i++) { (gdb) list 450 if ( ml->sml_desc == vi->vi_ad ) 451 break; 452 } 453 if ( !ml ) 454 continue; 455 for (i=0; !BER_BVISNULL( &ml->sml_values[i] ); i++) { 456 ptr = ber_bvchr(&ml->sml_values[i], '{' ); 457 if ( !ptr ) { 458 Debug(LDAP_DEBUG_TRACE, "weight missing from attribute %s\n", 459 vi->vi_ad->ad_cname.bv_val, 0, 0); (gdb) print *ml $2 = {sml_mod = {sm_op = 1, sm_flags = 0, sm_desc = 0x2b2409a344d0, sm_type = { bv_len = 20, bv_val = 0x2aabaea1f8e9 "suorgcontactstanford"}, sm_values = 0x0, sm_nvalues = 0x0}, sml_next = 0x2aabaeaf4770} (gdb) print i No symbol "i" in current context. (gdb) print ml->sml_mod.sm_values $3 = 0x0 I'll leave it running in gdb so that I can find additional information for you as needed.

1 0

Re: (ITS#4959) replica seg faults if syncrepl searchbase =""
by h.b.furuseth＠usit.uio.no 24 May '07

24 May '07

ali.pouya(a)free.fr writes: > tls.c:2908: error: syntax error before '*' token > tls.c: In function `find_oid': > (...) That's from ITS#4975: The code was broken for builds without TLS. It's been fixed in HEAD. Does it work now? -- Regards, Hallvard

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openldap-bugs