openldap-bugs

openldap-bugs@openldap.org

1 participants
20967 discussions

Re: (ITS#6962) Download down?
by h.b.furuseth＠usit.uio.no 03 Jun '11

03 Jun '11

demian.djrn(a)gmail.com writes: > all mirrors are down, i can't download the program. The mirror list needs to be updated. These are down or obsolete: Costa Rica: No /openldap directory. Italy: Unknown host it.openldap.org. Korea: No route to host ftp.holywar.net; TTL exceeded. Portugal: Last update was in 2008. The others work for me. -- Hallvard

1 0

Re: (ITS#6883) Improved Makefiles for contrib modules
by bgmilne＠staff.telkomsa.net 03 Jun '11

03 Jun '11

--Boundary-00=_50J6N9eQwpy3uQe Content-Type: Text/Plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit On Tuesday, 29 March 2011 21:20:53 quanah(a)zimbra.com wrote: > --On Tuesday, March 29, 2011 3:25 PM +0000 bgmilne(a)staff.telkomsa.net wrote: > > Full_Name: Buchan Milne > > Version: 2.4.25 > > OS: Linux > > URL: ftp://ftp.openldap.org/incoming/ > > Submission from: (NULL) (196.25.124.16) > > > > > > While the code in contrib is not supported, some overlays provide make > > files, some don't, and there were variations in a lot of the make files > > (e.g. use of DESTDIR or not). > > > > In order to add make files for overlays that don't have them, improve the > > consistency of the make files between overlays that had them, and to > > provide some basic sanity testing in a 'test' target, I have created the > > patch at: > > http://svn.mandriva.com/cgi-bin/viewvc.cgi/packages/cooker/openldap/curre > > nt/SOURCES/openldap-2.4.25-contrib-makefiles-with-tests.patch?revision=64 > > 8744&view=markup > > > > The patch is against 2.4.25, but should apply to master (except that > > there two additional overlays are present in master). Where feasible I > > have retained the majority of an existing make file, in other cases, > > where modifications would exceed the original content, I have replaced > > existing make files wholesale. > > > > The attached patch file is derived from OpenLDAP Software. All of the > > modifications to OpenLDAP Software represented in the following patch(es) > > were developed by Buchan Milne (bgmilne(a)staff.telkomsa.net). I have not > > assigned rights and/or interest in this work to any party. > > Hi Buchan, > > Can you make the patch available via git-format-patch? Please find it attached. Regards, Buchan --Boundary-00=_50J6N9eQwpy3uQe Content-Type: text/x-patch; charset="UTF-8"; name="0001-Fix-contrib-Makefiles-to-use-libtool-and-be-consiste.patch" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="0001-Fix-contrib-Makefiles-to-use-libtool-and-be-consiste.patch" =46rom 168ed0544cfd529c8bdff1e5366c1bc60477b1cb Mon Sep 17 00:00:00 2001 =46rom: Buchan Milne <bgmilne(a)staff.telkomsa.net> Date: Fri, 3 Jun 2011 10:18:39 +0200 Subject: [PATCH] Fix contrib Makefiles to use libtool and be consistent (IT= S#6883) This makes existing Makefiles provided with contrib modules more consistent, using libtool for compiling and linking. A trivial test target has also been added, which tests that the module can be loaded. Existing Makefiles were consulted, but were mainly copied from the first working/tested Makefile. As such, any pre-existing copyright notices have been replaced. Makefiles are also provided for all the contrib modules that did not have Makefiles. =2D-- contrib/slapd-modules/acl/Makefile | 48 +++++++++++++++ contrib/slapd-modules/addpartial/Makefile | 50 ++++++++++++++--- contrib/slapd-modules/allop/Makefile | 47 +++++++++++++++ contrib/slapd-modules/allowed/Makefile | 58 ++++++++++--------- contrib/slapd-modules/autogroup/Makefile | 36 +++++++++--- contrib/slapd-modules/cloak/Makefile | 43 ++++++++++++-- contrib/slapd-modules/denyop/Makefile | 48 +++++++++++++++ contrib/slapd-modules/dsaschema/Makefile | 47 +++++++++++++++ contrib/slapd-modules/dupent/Makefile | 58 +++++++++---------- contrib/slapd-modules/kinit/Makefile | 47 +++++++++++++++ contrib/slapd-modules/lastbind/Makefile | 32 +++++++--- contrib/slapd-modules/lastmod/Makefile | 48 +++++++++++++++ contrib/slapd-modules/noopsrch/Makefile | 58 +++++++++---------- contrib/slapd-modules/nops/Makefile | 47 ++++++++++++---- contrib/slapd-modules/nssov/Makefile | 13 ++++- contrib/slapd-modules/passwd/Makefile | 86 +++++++++++++++---------= =2D--- contrib/slapd-modules/passwd/sha2/Makefile | 48 +++++++++++++--- contrib/slapd-modules/trace/Makefile | 48 +++++++++++++++ 18 files changed, 680 insertions(+), 182 deletions(-) create mode 100644 contrib/slapd-modules/acl/Makefile create mode 100644 contrib/slapd-modules/allop/Makefile create mode 100644 contrib/slapd-modules/denyop/Makefile create mode 100644 contrib/slapd-modules/dsaschema/Makefile create mode 100644 contrib/slapd-modules/kinit/Makefile create mode 100644 contrib/slapd-modules/lastmod/Makefile create mode 100644 contrib/slapd-modules/trace/Makefile diff --git a/contrib/slapd-modules/acl/Makefile b/contrib/slapd-modules/acl= /Makefile new file mode 100644 index 0000000..9f48c0d =2D-- /dev/null +++ b/contrib/slapd-modules/acl/Makefile @@ -0,0 +1,48 @@ +# $OpenLDAP$ +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# <http://www.OpenLDAP.org/license.html>. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +CPPFLAGS+=3D-DSLAPD_OVER_ACL=3DSLAPD_MOD_DYNAMIC +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: posixgroup.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< + +clean: + rm -rf *.lo *.la *.o .libs/ + +install: posixgroup.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: posixgroup.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/addpartial/Makefile b/contrib/slapd-modu= les/addpartial/Makefile index 3b68815..2f1fd31 100644 =2D-- a/contrib/slapd-modules/addpartial/Makefile +++ b/contrib/slapd-modules/addpartial/Makefile @@ -1,13 +1,47 @@ # $OpenLDAP$ =2DOPENLDAP_SRC=3D../../.. =2DOPENLDAP_BLD=3D../../.. =2DCPPFLAGS+=3D-I${OPENLDAP_SRC}/include -I${OPENLDAP_SRC}/servers/slapd -I= ${OPENLDAP_BLD}/include =2DCC=3Dgcc +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# <http://www.OpenLDAP.org/license.html>. =20 =2Dall: addpartial-overlay.so +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +LIBTOOL=3D../../../libtool =20 =2Daddpartial-overlay.so: addpartial-overlay.c =2D $(CC) -shared $(CPPFLAGS) $(LDFLAGS) -Wall -o $@ $? +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: addpartial.la + +%.lo: addpartial-overlay.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< -o addpartial.lo + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm addpartial-overlay.so + rm -rf *.lo *.la *.o .libs/ + +install: addpartial.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: addpartial.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/allop/Makefile b/contrib/slapd-modules/a= llop/Makefile new file mode 100644 index 0000000..a995e61 =2D-- /dev/null +++ b/contrib/slapd-modules/allop/Makefile @@ -0,0 +1,47 @@ +# $OpenLDAP$ +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# <http://www.OpenLDAP.org/license.html>. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: allop.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< + +clean: + rm -rf *.lo *.la *.o .libs/ + +install: allop.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: allop.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/allowed/Makefile b/contrib/slapd-modules= /allowed/Makefile index 8f5be91..75e63c1 100644 =2D-- a/contrib/slapd-modules/allowed/Makefile +++ b/contrib/slapd-modules/allowed/Makefile @@ -1,8 +1,6 @@ =2D# $OpenLDAP$ =2D# This work is part of OpenLDAP Software <http://www.openldap.org/>. =2D# =2D# Copyright 1998-2011 The OpenLDAP Foundation. =2D# Copyright 2004 Howard Chu, Symas Corp. All Rights Reserved. +# $$ +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted only as authorized by the OpenLDAP @@ -12,35 +10,39 @@ # top-level directory of the distribution or, alternatively, at # <http://www.OpenLDAP.org/license.html>. =20 =2DPREFIX=3D/opt/openldap-HEAD =2D +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +CPPFLAGS+=3D-DSLAPD_OVER_ALLOWED=3DSLAPD_MOD_DYNAMIC LIBTOOL=3D../../../libtool =2DOPT=3D-g -O2 =2DCC=3Dgcc =2D =2DDEFS=3D-DSLAPD_OVER_ALLOWED=3DSLAPD_MOD_DYNAMIC =2D =2DLDAP_INC=3D-I../../../include -I../../../servers/slapd =2DINCS=3D$(LDAP_INC) =2D =2DLDAP_LIB=3D-lldap_r -llber -L../../../lib =2DLDAP_LIB=3D =2DLIBS=3D$(LDAP_LIB) =20 =2Dall: allowed.la +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd =20 +all: allowed.la =20 =2Dallowed.lo: allowed.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(OPT) $(DEFS) $(INCS) -c $? +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< =20 =2Dallowed.la: allowed.lo =2D $(LIBTOOL) --mode=3Dlink $(CC) $(OPT) -version-info 0:0:0 \ =2D -rpath $(PREFIX)/lib -module -o $@ $? $(LIBS) +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm -f allowed.o allowed.lo allowed.la + rm -rf *.lo *.la *.o .libs/ =20 install: allowed.la =2D mkdir -p $(PREFIX)/libexec/openldap =2D $(LIBTOOL) --mode=3Dinstall cp allowed.la $(PREFIX)/libexec/openldap =2D $(LIBTOOL) --finish $(PREFIX)/libexec/openldap + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: allowed.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/autogroup/Makefile b/contrib/slapd-modul= es/autogroup/Makefile index 70146ac..4438cbf 100644 =2D-- a/contrib/slapd-modules/autogroup/Makefile +++ b/contrib/slapd-modules/autogroup/Makefile @@ -1,6 +1,17 @@ =2DLIBTOOL=3D../../../libtool +# $OpenLDAP$ +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# <http://www.OpenLDAP.org/license.html>. =20 =2DCPPFLAGS+=3D-I../../../include -I../../../servers/slapd +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +LIBTOOL=3D../../../libtool =20 ldap_subdir =3D openldap prefix=3D/usr/local @@ -8,20 +19,29 @@ exec_prefix =3D $(prefix) libdir =3D $(exec_prefix)/lib libexecdir =3D $(exec_prefix)/libexec moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd =20 all: autogroup.la =20 =2Dautogroup.lo: autogroup.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $? +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< =20 =2Dautogroup.la: autogroup.lo +%.la: %.lo $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(libdir) -module -o $@ $?=20 + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm -f autogroup.lo autogroup.la + rm -rf *.lo *.la *.o .libs/ =20 install: autogroup.la mkdir -p $(DESTDIR)$(moduledir) =2D $(LIBTOOL) --mode=3Dinstall cp autogroup.la $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: autogroup.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/cloak/Makefile b/contrib/slapd-modules/c= loak/Makefile index 4562fcb..d92ff8b 100644 =2D-- a/contrib/slapd-modules/cloak/Makefile +++ b/contrib/slapd-modules/cloak/Makefile @@ -1,17 +1,48 @@ # $OpenLDAP$ +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# <http://www.OpenLDAP.org/license.html>. + CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 CPPFLAGS+=3D-DSLAPD_OVER_CLOAK=3DSLAPD_MOD_DYNAMIC =2DLIBS=3D-lldap_r -llber -lcrypto LIBTOOL=3D../../../libtool =20 +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + all: cloak.la =20 =2Dcloak.lo: cloak.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -c $? +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< =20 =2Dcloak.la: cloak.lo +%.la: %.lo $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(PREFIX)/lib -module -o $@ $? $(LIBS) + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm cloak.lo cloak.la + rm -rf *.lo *.la *.o .libs/ + +install: cloak.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: cloak.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/denyop/Makefile b/contrib/slapd-modules/= denyop/Makefile new file mode 100644 index 0000000..711eee7 =2D-- /dev/null +++ b/contrib/slapd-modules/denyop/Makefile @@ -0,0 +1,48 @@ +# $OpenLDAP$ +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# <http://www.OpenLDAP.org/license.html>. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +CPPFLAGS+=3D-DSLAPD_OVER_DENYOP=3DSLAPD_MOD_DYNAMIC +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: denyop.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< + +clean: + rm -rf *.lo *.la *.o .libs/ + +install: denyop.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: denyop.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/dsaschema/Makefile b/contrib/slapd-modul= es/dsaschema/Makefile new file mode 100644 index 0000000..90f711e =2D-- /dev/null +++ b/contrib/slapd-modules/dsaschema/Makefile @@ -0,0 +1,47 @@ +# $OpenLDAP$ +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# <http://www.OpenLDAP.org/license.html>. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: dsaschema.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< + +clean: + rm -rf *.lo *.la *.o .libs/ + +install: dsaschema.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: dsaschema.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/dupent/Makefile b/contrib/slapd-modules/= dupent/Makefile index 54a69ce..c1e8997 100644 =2D-- a/contrib/slapd-modules/dupent/Makefile +++ b/contrib/slapd-modules/dupent/Makefile @@ -1,8 +1,6 @@ # $OpenLDAP$ =2D# This work is part of OpenLDAP Software <http://www.openldap.org/>. =2D# =2D# Copyright 1998-2011 The OpenLDAP Foundation. =2D# Copyright 2004 Howard Chu, Symas Corp. All Rights Reserved. +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted only as authorized by the OpenLDAP @@ -12,41 +10,39 @@ # top-level directory of the distribution or, alternatively, at # <http://www.OpenLDAP.org/license.html>. =20 +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +CPPFLAGS+=3D-DSLAPD_OVER_DUPENT=3DSLAPD_MOD_DYNAMIC -g -O2 LIBTOOL=3D../../../libtool =2DOPT=3D-DSLAPD_OVER_DUPENT=3D2 -g -O2 =2D#LIBTOOL=3D../../../../ldap-devel/libtool =2D#OPT=3D-DSLAPD_OVER_DUPENT=3D2 -g -O0 =2DCC=3Dgcc =2D =2DLDAP_INC=3D-I../../../include -I../../../servers/slapd =2D#LDAP_INC=3D-I../../../include -I../../../servers/slapd -I../../../../ld= ap-devel/include =2DINCS=3D$(LDAP_INC) =2D =2DLDAP_LIB=3D-lldap_r -llber =2DLIBS=3D$(LDAP_LIB) =20 +ldap_subdir =3D openldap prefix=3D/usr/local =2Dexec_prefix=3D$(prefix) =2Dldap_subdir=3D/openldap +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd =20 =2Dlibdir=3D$(exec_prefix)/lib =2Dlibexecdir=3D$(exec_prefix)/libexec =2Dmoduledir =3D $(libexecdir)$(ldap_subdir) +all: dupent.la =20 =2Dall: dupent.la +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< =20 =2D =2Ddupent.lo: dupent.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(OPT) $(DEFS) $(INCS) -c $? =2D =2Ddupent.la: dupent.lo =2D $(LIBTOOL) --mode=3Dlink $(CC) $(OPT) -version-info 0:0:0 \ =2D -rpath $(moduledir) -module -o $@ $? $(LIBS) +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm -f dupent.lo dupent.la + rm -rf *.lo *.la *.o .libs/ =20 install: dupent.la mkdir -p $(DESTDIR)$(moduledir) =2D $(LIBTOOL) --mode=3Dinstall cp dupent.la $(DESTDIR)$(moduledir) =2D + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: dupent.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/kinit/Makefile b/contrib/slapd-modules/k= init/Makefile new file mode 100644 index 0000000..750c7b9 =2D-- /dev/null +++ b/contrib/slapd-modules/kinit/Makefile @@ -0,0 +1,47 @@ +# $OpenLDAP$ +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# <http://www.OpenLDAP.org/license.html>. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: kinit.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< -lkrb5 + +clean: + rm -rf *.lo *.la *.o .libs/ + +install: kinit.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: kinit.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/lastbind/Makefile b/contrib/slapd-module= s/lastbind/Makefile index ecc9ed1..643b0c1 100644 =2D-- a/contrib/slapd-modules/lastbind/Makefile +++ b/contrib/slapd-modules/lastbind/Makefile @@ -1,5 +1,5 @@ # $OpenLDAP$ =2D# Copyright 2009 Jonathan Clarke <jonathan(a)phillipoux.net>. +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> # All rights reserved. # # Redistribution and use in source and binary forms, with or without @@ -12,23 +12,37 @@ =20 CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 CPPFLAGS+=3D-DSLAPD_OVER_LASTBIND=3DSLAPD_MOD_DYNAMIC =2D#LIBTOOL=3Dlibtool LIBTOOL=3D../../../libtool =20 +ldap_subdir =3D openldap prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd =20 all: lastbind.la =20 =2Dlastbind.lo: lastbind.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $? +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< =20 =2Dlastbind.la: lastbind.lo +%.la: %.lo $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(prefix)/lib -module -o $@ $? + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm -rf lastbind.lo lastbind.la lastbind.o .libs/ + rm -rf *.lo *.la *.o .libs/ =20 install: lastbind.la =2D mkdir -p $(prefix)/libexec/openldap =2D $(LIBTOOL) --mode=3Dinstall cp lastbind.la $(prefix)/libexec/openldap + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: lastbind.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/lastmod/Makefile b/contrib/slapd-modules= /lastmod/Makefile new file mode 100644 index 0000000..e9f0408 =2D-- /dev/null +++ b/contrib/slapd-modules/lastmod/Makefile @@ -0,0 +1,48 @@ +# $OpenLDAP$ +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# <http://www.OpenLDAP.org/license.html>. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +CPPFLAGS+=3D-DSLAPD_OVER_LASTMOD=3DSLAPD_MOD_DYNAMIC +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: lastmod.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< + +clean: + rm -rf *.lo *.la *.o .libs/ + +install: lastmod.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: lastmod.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/noopsrch/Makefile b/contrib/slapd-module= s/noopsrch/Makefile index d90bc59..7227582 100644 =2D-- a/contrib/slapd-modules/noopsrch/Makefile +++ b/contrib/slapd-modules/noopsrch/Makefile @@ -1,8 +1,6 @@ # $OpenLDAP$ =2D# This work is part of OpenLDAP Software <http://www.openldap.org/>. =2D# =2D# Copyright 1998-2011 The OpenLDAP Foundation. =2D# Copyright 2004 Howard Chu, Symas Corp. All Rights Reserved. +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted only as authorized by the OpenLDAP @@ -12,41 +10,39 @@ # top-level directory of the distribution or, alternatively, at # <http://www.OpenLDAP.org/license.html>. =20 +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +CPPFLAGS+=3D-DSLAPD_OVER_NOOPSRCH=3DSLAPD_MOD_DYNAMIC -g -O2 LIBTOOL=3D../../../libtool =2DOPT=3D-DSLAPD_OVER_NOOPSRCH=3D2 -g -O2 =2D#LIBTOOL=3D../../../../ldap-devel/libtool =2D#OPT=3D-DSLAPD_OVER_NOOPSRCH=3D2 -g -O0 =2DCC=3Dgcc =2D =2DLDAP_INC=3D-I../../../include -I../../../servers/slapd =2D#LDAP_INC=3D-I../../../include -I../../../servers/slapd -I../../../../ld= ap-devel/include =2DINCS=3D$(LDAP_INC) =2D =2DLDAP_LIB=3D-lldap_r -llber =2DLIBS=3D$(LDAP_LIB) =20 +ldap_subdir =3D openldap prefix=3D/usr/local =2Dexec_prefix=3D$(prefix) =2Dldap_subdir=3D/openldap +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd =20 =2Dlibdir=3D$(exec_prefix)/lib =2Dlibexecdir=3D$(exec_prefix)/libexec =2Dmoduledir =3D $(libexecdir)$(ldap_subdir) +all: noopsrch.la =20 =2Dall: noopsrch.la +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< =20 =2D =2Dnoopsrch.lo: noopsrch.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(OPT) $(DEFS) $(INCS) -c $? =2D =2Dnoopsrch.la: noopsrch.lo =2D $(LIBTOOL) --mode=3Dlink $(CC) $(OPT) -version-info 0:0:0 \ =2D -rpath $(moduledir) -module -o $@ $? $(LIBS) +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm -f noopsrch.lo noopsrch.la + rm -rf *.lo *.la *.o .libs/ =20 install: noopsrch.la mkdir -p $(DESTDIR)$(moduledir) =2D $(LIBTOOL) --mode=3Dinstall cp noopsrch.la $(DESTDIR)$(moduledir) =2D + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: noopsrch.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/nops/Makefile b/contrib/slapd-modules/no= ps/Makefile index fce44e0..6da5cd0 100644 =2D-- a/contrib/slapd-modules/nops/Makefile +++ b/contrib/slapd-modules/nops/Makefile @@ -1,23 +1,48 @@ # $OpenLDAP$ +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# <http://www.OpenLDAP.org/license.html>. + CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 CPPFLAGS+=3D-DSLAPD_OVER_NOPS=3DSLAPD_MOD_DYNAMIC =2DLIBS=3D-L$(PREFIX)/lib -lldap_r -llber -lcrypto +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd =20 all: nops.la =20 =2Dnops.lo: nops.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -c $? +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< =20 =2Dnops.la: nops.lo +%.la: %.lo $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(PREFIX)/lib -module -o $@ $? $(LIBS) + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm -f nops.lo nops.la + rm -rf *.lo *.la *.o .libs/ =20 install: nops.la =2D mkdir -p $(PREFIX)/lib/openldap=20 =2D mkdir -p $(PREFIX)/man/man5 =2D $(LIBTOOL) --mode=3Dinstall cp nops.la $(PREFIX)/lib/openldap =2D $(LIBTOOL) --finish $(PREFIX)/lib =2D cp nops.5 $(PREFIX)/man/man5 + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: nops.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/nssov/Makefile b/contrib/slapd-modules/n= ssov/Makefile index 322fcdd..f1ec793 100644 =2D-- a/contrib/slapd-modules/nssov/Makefile +++ b/contrib/slapd-modules/nssov/Makefile @@ -28,7 +28,7 @@ NLDAPD_INC=3D-Inss-pam-ldapd INCS=3D$(LDAP_INC) $(NLDAPD_INC) =20 LDAP_LIB=3D-lldap_r -llber =2DLIBS=3D$(LDAP_LIB) +LIBS=3D-L../../../libraries/liblber -L../../../libraries/libldap_r $(LDAP_= LIB) =20 prefix=3D/usr/local exec_prefix=3D$(prefix) @@ -39,6 +39,7 @@ libexecdir=3D$(exec_prefix)/libexec moduledir =3D $(libexecdir)$(ldap_subdir) sysconfdir =3D $(prefix)/etc$(ldap_subdir) schemadir =3D $(sysconfdir)/schema +slapd=3D../../../servers/slapd/slapd =20 all: nssov.la =20 @@ -59,7 +60,7 @@ $(OBJS): nssov.h =20 nssov.la: $(OBJS) $(XOBJS) $(LIBTOOL) --mode=3Dlink $(CC) $(OPT) -version-info 0:0:0 \ =2D -rpath $(libdir) -module -o $@ $(OBJS) $(XOBJS) $(LIBS) + -rpath $(moduledir) -module -o $@ $(OBJS) $(XOBJS) $(LIBS) =20 install: nssov.la mkdir -p $(DESTDIR)$(moduledir) @@ -69,3 +70,11 @@ install: nssov.la clean: rm -f *.*o *.la .libs/* rm -rf .libs + +test: nssov.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/passwd/Makefile b/contrib/slapd-modules/= passwd/Makefile index 1e49e6a..748b4ce 100644 =2D-- a/contrib/slapd-modules/passwd/Makefile +++ b/contrib/slapd-modules/passwd/Makefile @@ -1,46 +1,52 @@ # $OpenLDAP$ =2DCPPFLAGS+=3D-I../../../include -I../../../servers/slapd =2D =2Dall: kerberos.la netscape.la radius.la apr1.la =2D =2Dkerberos.lo: kerberos.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -DHAVE_KRB5 -Wall -c $? =2D =2Dkerberos.la: kerberos.lo =2D $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(PREFIX)/lib -module -o $@ $? -lkrb5 =2D =2Dnetscape.lo: netscape.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $? =2D =2Dnetscape.la: netscape.lo +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# <http://www.OpenLDAP.org/license.html>. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +LIBTOOL=3D../../../libtool +SUBDIRS =3D sha2 + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: kerberos.la netscape.la radius.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +kerberos.la: kerberos.lo $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(PREFIX)/lib -module -o $@ $?=20 =2D =2Dradius.lo: radius.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $? =2D =2Dradius.la: radius.lo =2D $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(PREFIX)/lib -module -o $@ $? -lradius =2D =2Dapr1.lo: apr1.c =2D $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $? + -rpath $(moduledir) -module -o $@ $< -lkrb5 =20 =2Dapr1.la: apr1.lo +%.la: %.lo $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ =2D -rpath $(PREFIX)/lib -module -o $@ $?=20 + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D rm -f kerberos.lo kerberos.la =2D rm -f netscape.lo netscape.la =2D rm -f radius.lo radius.la =2D rm -f apr1.lo apr1.la =2D =2Dinstall: kerberos.la netscape.la radius.la apr1.la =2D mkdir -p $(PREFIX)/lib/openldap =2D $(LIBTOOL) --mode=3Dinstall cp kerberos.la $(PREFIX)/lib/openldap =2D $(LIBTOOL) --mode=3Dinstall cp netscape.la $(PREFIX)/lib/openldap =2D $(LIBTOOL) --mode=3Dinstall cp radius.la $(PREFIX)/lib/openldap =2D $(LIBTOOL) --mode=3Dinstall cp apr1.la $(PREFIX)/lib/openldap =2D $(LIBTOOL) --finish $(PREFIX)/lib + rm -rf *.lo *.la *.o .libs/ + +install: kerberos.la netscape.la radius.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: kerberos.la netscape.la radius.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/passwd/sha2/Makefile b/contrib/slapd-mod= ules/passwd/sha2/Makefile index 5dcb1db..d03297d 100644 =2D-- a/contrib/slapd-modules/passwd/sha2/Makefile +++ b/contrib/slapd-modules/passwd/sha2/Makefile @@ -1,15 +1,47 @@ # $OpenLDAP$ +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# <http://www.OpenLDAP.org/license.html>. =20 =2DOPENLDAP :=3D ../../../.. +CPPFLAGS+=3D-I../../../../include -I../../../../servers/slapd=20 +LIBTOOL=3D../../../../libtool =20 =2D#CCFLAGS =3D -Wall -g -DSLAPD_SHA2_DEBUG =2DCCFLAGS =3D -Wall -g +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../../servers/slapd/slapd =20 =2Dslapd-sha2.so: slapd-sha2.o sha2.o =2D $(CC) -I$(OPENLDAP)/include -shared -Wall -g $^ -o $@ +all: sha2.la =20 =2D%.o: %.c =2D $(CC) -I$(OPENLDAP)/include $(CCFLAGS) -c $< +%.lo: slapd-sha2.c sha2.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: slapd-sha2.lo sha2.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< =20 clean: =2D @rm -f slapd-sha2.so *.o + rm -rf *.lo *.la *.o .libs/ + +install: sha2.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: sha2.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done diff --git a/contrib/slapd-modules/trace/Makefile b/contrib/slapd-modules/t= race/Makefile new file mode 100644 index 0000000..948ffef =2D-- /dev/null +++ b/contrib/slapd-modules/trace/Makefile @@ -0,0 +1,48 @@ +# $OpenLDAP$ +# Copyright 2011 Buchan Milne <bgmilne(a)staff.telkomsa.net> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted only as authorized by the OpenLDAP +# Public License. +# +# A copy of this license is available in the file LICENSE in the +# top-level directory of the distribution or, alternatively, at +# <http://www.OpenLDAP.org/license.html>. + +CPPFLAGS+=3D-I../../../include -I../../../servers/slapd=20 +CPPFLAGS+=3D-DSLAPD_OVER_TRACE=3DSLAPD_MOD_DYNAMIC +LIBTOOL=3D../../../libtool + +ldap_subdir =3D openldap +prefix=3D/usr/local +exec_prefix =3D $(prefix) +libdir =3D $(exec_prefix)/lib +libexecdir =3D $(exec_prefix)/libexec +moduledir =3D $(exec_prefix)/libexec/$(ldap_subdir) +slapd=3D../../../servers/slapd/slapd + +all: trace.la + +%.lo: %.c + $(LIBTOOL) --mode=3Dcompile $(CC) $(CPPFLAGS) -Wall -c $< + +%.la: %.lo + $(LIBTOOL) --mode=3Dlink $(CC) -version-info 0:0:0 \ + -rpath $(moduledir) -module -o $@ $< + +clean: + rm -rf *.lo *.la *.o .libs/ + +install: trace.la + mkdir -p $(DESTDIR)$(moduledir) + $(LIBTOOL) --mode=3Dinstall cp $? $(DESTDIR)$(moduledir) + $(LIBTOOL) --finish $(DESTDIR)$(moduledir) + +test: trace.la + @for i in $?;do \ + echo "Testing loading module $$i"; \ + echo "modulepath ." > test-slapd.conf; \ + echo "moduleload $$i" >> test-slapd.conf; \ + $(slapd) -T test -f test-slapd.conf && rm -f test-slapd.conf; \ + done =2D-=20 1.7.1 --Boundary-00=_50J6N9eQwpy3uQe--

1 0

(ITS#6962) Download down?
by demian.djrn＠gmail.com 02 Jun '11

02 Jun '11

Full_Name: Demian J Ramirez Version: ----- OS: windows 7 URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (189.178.46.195) all mirrors are down, i can't download the program.

1 0

Re: (ITS#6915) memberof+accesslog duplicate reqStart
by subbarao＠computer.org 01 Jun '11

01 Jun '11

On 06/01/2011 07:36 PM, Yuri Bank wrote: > Do you think this could be related to: > http://www.openldap.org/its/index.cgi?findid=6864 > > I've been having similar issues with MemberOf and Accesslog overlays > used together. I've occasionally experienced similar things that you describe but haven't captured the detailed data to be able to correlate that with this issue. > In your fix, is the memberof overlay enabled on your consumer nodes? No, it is disabled everywhere. -Kartik

1 0

Re: (ITS#6915) memberof+accesslog duplicate reqStart
by yuribank＠gmail.com 01 Jun '11

01 Jun '11

--bcaec520e733d305e204a4aefc06 Content-Type: text/plain; charset=ISO-8859-1 Do you think this could be related to: http://www.openldap.org/its/index.cgi?findid=6864 I've been having similar issues with MemberOf and Accesslog overlays used together. In your fix, is the memberof overlay enabled on your consumer nodes? -Yuri On Wed, Jun 1, 2011 at 1:00 PM, <subbarao(a)computer.org> wrote: > This is a multi-part message in MIME format. > --------------050703040907090602090901 > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > Content-Transfer-Encoding: 7bit > > I figured I would share a workaround that I'm currently using for this > issue which may be of help to others. I've disabled the memberOf overlay > in slapd, and use an external script to populate memberOf on the master > server, which then replicates to the consumer servers. I currently run > this every 5 minutes from cron as follows: > > memberof.pl --ldap > > Regards, > > -Kartik > > --------------050703040907090602090901 > Content-Type: application/x-perl; > name="memberof.pl" > Content-Transfer-Encoding: 7bit > Content-Disposition: attachment; > filename="memberof.pl" > > #! /usr/bin/perl > > # Implements memberOf reverse mapping attributes -- workaround for when > # memberOf overlay isn't available > > use Net::LDAP; > use Net::LDAP::LDIF; > use Authen::SASL; > use Fcntl qw(LOCK_EX LOCK_NB); > use Getopt::Long; > > use strict; > > my $basedn = "dc=example,dc=com"; > > my @attrs = qw(member manager); > # Note -- this filter properly excludes dynamic groupOfURLs groups > my $attrfilter = '(|' . join("", map { "($_=*)" } @attrs) . ')'; > my %revattrs = (member => 'memberOf', manager => 'directReports'); > my %fwattrs = reverse %revattrs; > my $revattrfilter = '(|' . join("", map { "($_=*)" } values %revattrs) . > ')'; > my (%entries, %reventries); > > # Prevent multiple instances from running at the same time > open(LOCKFH, $0); flock(LOCKFH, LOCK_EX|LOCK_NB) or exit 1; > > my ($generate_ldif, $update_ldap); > GetOptions('ldif' => \$generate_ldif, 'ldap' => \$update_ldap); > > my $ldifout = Net::LDAP::LDIF->new('-', 'w'); > $ldifout->{change} = 1; > my $ldap = Net::LDAP->new('ldapi://') or die "ldapi: $@\n"; > my $sasl = Authen::SASL->new(mechanism => 'EXTERNAL'); > my $sasl_client = $sasl->client_new('ldap', 'localhost'); > $ldap->bind(undef, sasl => $sasl_client); > > # Build %entries and %reventries maps > my $mesg = $ldap->search(base => $basedn, > filter => $attrfilter, > attrs => \@attrs); > $mesg->code && die($mesg->error . "\n"); > foreach my $entry ($mesg->all_entries) {$entries{lc $entry->dn} = $entry } > > $mesg = $ldap->search(base => $basedn, > filter => $revattrfilter, > attrs => [values > %revattrs]); > $mesg->code && die($mesg->error . "\n"); > foreach my $entry ($mesg->all_entries) { $reventries{lc $entry->dn} = > $entry } > > # Go through and generate updates for the reverse mapping attributes > my ($dn, $entry); > while (($dn, $entry) = each %entries) { > foreach my $attr (@attrs) { > my $revattr = $revattrs{$attr}; > foreach my $val ($entry->get_value($attr)) { > $val = lc $val; > if (!$reventries{$val}) { > $reventries{$val} = Net::LDAP::Entry->new; > $reventries{$val}->dn($val); > $reventries{$val}->changetype('modify'); > } > $reventries{$val}->add($revattr => $entry->dn) > unless grep({ lc $_ eq $dn } > > $reventries{$val}->get_value($revattr)); > } > } > } > while (($dn, $entry) = each %reventries) { > foreach my $revattr (values %revattrs) { > foreach my $val ($entry->get_value($revattr)) { > $val = lc $val; > $reventries{$dn}->delete($revattr => $val) > if !exists($entries{$val}) > || !grep({ lc $_ eq $dn } > > $entries{$val}->get_value($fwattrs{$revattr})); > > } > } > if ($entry->changes) { > $ldifout->write_entry($entry) if $generate_ldif; > if ($update_ldap) { > my $modmesg = $entry->update($ldap); > $modmesg->code && die("LDAP: " .$modmesg->error . > "\n"); > } > } > } > > --------------050703040907090602090901-- > > > --bcaec520e733d305e204a4aefc06 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Do you think this could be related to: <a href=3D"http://www.openldap.org/i= ts/index.cgi?findid=3D6864">http://www.openldap.org/its/index.cgi?findid=3D= 6864</a>=A0 I've been having similar issues with MemberOf and A= ccesslog overlays used together. In your fix, is the memberof overlay enabled on your consumer nodes= ? -Yuri <div class=3D"gmail_quote">On Wed, Jun 1, 2011 at 1:0= 0 PM, <<a href=3D"mailto:subbarao@computer.org">subba= rao(a)computer.org</a>> wrote: <blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p= x #ccc solid;padding-left:1ex;">This is a multi-part message in MIME format= . --------------050703040907090602090901 Content-Type: text/plain; charset=3DISO-8859-1; format=3Dflowed Content-Transfer-Encoding: 7bit I figured I would share a workaround that I'm currently using for this<= br> issue which may be of help to others. I've disabled the memberOf overla= y in slapd, and use an external script to populate memberOf on the master server, which then replicates to the consumer servers. I currently run this every 5 minutes from cron as follows: <a href=3D"http://memberof.pl" target=3D"_blank">memberof.pl</a> --ldap Regards, =A0 =A0 =A0 =A0-Kartik --------------050703040907090602090901 Content-Type: application/x-perl; =A0name=3D"<a href=3D"http://memberof.pl" target=3D"_blank">memberof.p= l</a>" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; =A0filename=3D"<a href=3D"http://memberof.pl" target=3D"_blank">member= of.pl</a>" #! /usr/bin/perl # Implements memberOf reverse mapping attributes -- workaround for when # memberOf overlay isn't available use Net::LDAP; use Net::LDAP::LDIF; use Authen::SASL; use Fcntl qw(LOCK_EX LOCK_NB); use Getopt::Long; use strict; my $basedn =3D "dc=3Dexample,dc=3Dcom"; my @attrs =3D qw(member manager); # Note -- this filter properly excludes dynamic groupOfURLs groups my $attrfilter =3D '(|' . join("", map { "($_=3D*)&q= uot; } @attrs) . ')'; my %revattrs =3D (member =3D> 'memberOf', manager =3D> 'd= irectReports'); my %fwattrs =3D reverse %revattrs; my $revattrfilter =3D '(|' . join("", map { "($_=3D*= )" } values %revattrs) . ')'; my (%entries, %reventries); # Prevent multiple instances from running at the same time open(LOCKFH, $0); flock(LOCKFH, LOCK_EX|LOCK_NB) or exit 1; my ($generate_ldif, $update_ldap); GetOptions('ldif' =3D> \$generate_ldif, 'ldap' =3D> \= $update_ldap); my $ldifout =3D Net::LDAP::LDIF->new('-', 'w'); $ldifout->{change} =3D 1; my $ldap =3D Net::LDAP->new('ldapi://') or die "ldapi: $@\n= "; my $sasl =3D Authen::SASL->new(mechanism =3D> 'EXTERNAL');<br= > my $sasl_client =3D $sasl->client_new('ldap', 'localhost&#39= ;); $ldap->bind(undef, sasl =3D> $sasl_client); # Build %entries and %reventries maps my $mesg =3D $ldap->search(base =3D> $basedn, =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0 =A0 =A0 =A0 =A0 =A0 filter =3D> $attrfilter, =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0 =A0 =A0 =A0 =A0 =A0 attrs =3D> \@attrs); $mesg->code && die($mesg->error . "\n"); foreach my $entry ($mesg->all_entries) {$entries{lc $entry->dn} =3D $= entry } $mesg =3D $ldap->search(base =3D> $basedn, =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0 =A0 =A0 =A0 =A0 =A0 filter =3D> $revattrfilter, =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0 =A0 =A0 =A0 =A0 =A0 attrs =3D> [values %revattrs]); $mesg->code && die($mesg->error . "\n"); foreach my $entry ($mesg->all_entries) { $reventries{lc $entry->dn} = =3D $entry } # Go through and generate updates for the reverse mapping attributes my ($dn, $entry); while (($dn, $entry) =3D each %entries) { =A0 =A0 =A0 =A0foreach my $attr (@attrs) { =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0my $revattr =3D $revattrs{$attr}; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0foreach my $val ($entry->get_value($attr= )) { =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0$val =3D lc $val; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0if (!$reventries{$val}) {<b= r> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0$reventries= {$val} =3D Net::LDAP::Entry->new; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0$reventries= {$val}->dn($val); =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0$reventries= {$val}->changetype('modify'); =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0} =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0$reventries{$val}->add($= revattr =3D> $entry->dn) =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0unless grep= ({ lc $_ eq $dn } =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0$reventries{$val}->get_value($rev= attr)); =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0} =A0 =A0 =A0 =A0} } while (($dn, $entry) =3D each %reventries) { =A0 =A0 =A0 =A0foreach my $revattr (values %revattrs) { =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0foreach my $val ($entry->get_value($reva= ttr)) { =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0$val =3D lc $val; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0$reventries{$dn}->delete= ($revattr =3D> $val) =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0if !exists(= $entries{$val}) =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0|| !grep({ = lc $_ eq $dn } =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0 =A0 =A0 =A0 =A0 =A0 $entries{$val}->get_value($fwattrs{$revattr}));<= br> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0} =A0 =A0 =A0 =A0} =A0 =A0 =A0 =A0if ($entry->changes) { =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0$ldifout->write_entry($entry) if $genera= te_ldif; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0if ($update_ldap) { =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0my $modmesg =3D $entry->= update($ldap); =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0$modmesg->code &&amp= ; die("LDAP: " .$modmesg->error . =A0"\n"); =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0} =A0 =A0 =A0 =A0} } --------------050703040907090602090901-- </blockquote></div> --bcaec520e733d305e204a4aefc06--

1 0

Re: (ITS#6915) memberof+accesslog duplicate reqStart
by subbarao＠computer.org 01 Jun '11

01 Jun '11

This is a multi-part message in MIME format. --------------050703040907090602090901 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit I figured I would share a workaround that I'm currently using for this issue which may be of help to others. I've disabled the memberOf overlay in slapd, and use an external script to populate memberOf on the master server, which then replicates to the consumer servers. I currently run this every 5 minutes from cron as follows: memberof.pl --ldap Regards, -Kartik --------------050703040907090602090901 Content-Type: application/x-perl; name="memberof.pl" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="memberof.pl" #! /usr/bin/perl # Implements memberOf reverse mapping attributes -- workaround for when # memberOf overlay isn't available use Net::LDAP; use Net::LDAP::LDIF; use Authen::SASL; use Fcntl qw(LOCK_EX LOCK_NB); use Getopt::Long; use strict; my $basedn = "dc=example,dc=com"; my @attrs = qw(member manager); # Note -- this filter properly excludes dynamic groupOfURLs groups my $attrfilter = '(|' . join("", map { "($_=*)" } @attrs) . ')'; my %revattrs = (member => 'memberOf', manager => 'directReports'); my %fwattrs = reverse %revattrs; my $revattrfilter = '(|' . join("", map { "($_=*)" } values %revattrs) . ')'; my (%entries, %reventries); # Prevent multiple instances from running at the same time open(LOCKFH, $0); flock(LOCKFH, LOCK_EX|LOCK_NB) or exit 1; my ($generate_ldif, $update_ldap); GetOptions('ldif' => \$generate_ldif, 'ldap' => \$update_ldap); my $ldifout = Net::LDAP::LDIF->new('-', 'w'); $ldifout->{change} = 1; my $ldap = Net::LDAP->new('ldapi://') or die "ldapi: $@\n"; my $sasl = Authen::SASL->new(mechanism => 'EXTERNAL'); my $sasl_client = $sasl->client_new('ldap', 'localhost'); $ldap->bind(undef, sasl => $sasl_client); # Build %entries and %reventries maps my $mesg = $ldap->search(base => $basedn, filter => $attrfilter, attrs => \@attrs); $mesg->code && die($mesg->error . "\n"); foreach my $entry ($mesg->all_entries) {$entries{lc $entry->dn} = $entry } $mesg = $ldap->search(base => $basedn, filter => $revattrfilter, attrs => [values %revattrs]); $mesg->code && die($mesg->error . "\n"); foreach my $entry ($mesg->all_entries) { $reventries{lc $entry->dn} = $entry } # Go through and generate updates for the reverse mapping attributes my ($dn, $entry); while (($dn, $entry) = each %entries) { foreach my $attr (@attrs) { my $revattr = $revattrs{$attr}; foreach my $val ($entry->get_value($attr)) { $val = lc $val; if (!$reventries{$val}) { $reventries{$val} = Net::LDAP::Entry->new; $reventries{$val}->dn($val); $reventries{$val}->changetype('modify'); } $reventries{$val}->add($revattr => $entry->dn) unless grep({ lc $_ eq $dn } $reventries{$val}->get_value($revattr)); } } } while (($dn, $entry) = each %reventries) { foreach my $revattr (values %revattrs) { foreach my $val ($entry->get_value($revattr)) { $val = lc $val; $reventries{$dn}->delete($revattr => $val) if !exists($entries{$val}) || !grep({ lc $_ eq $dn } $entries{$val}->get_value($fwattrs{$revattr})); } } if ($entry->changes) { $ldifout->write_entry($entry) if $generate_ldif; if ($update_ldap) { my $modmesg = $entry->update($ldap); $modmesg->code && die("LDAP: " .$modmesg->error . "\n"); } } } --------------050703040907090602090901--

1 0

RE: Re: (ITS#6952)
by quanah＠zimbra.com 01 Jun '11

01 Jun '11

--On Friday, May 27, 2011 4:47 AM +0000 Srinivas.Kondamadugu(a)mphasis.com wrote: > Any help here? The ITS system is for reporting bugs, not for asking for help. If you need help, use the openldap-technical(a)openldap.org mailing list. --Quanah -- Quanah Gibson-Mount Sr. Member of Technical Staff Zimbra, Inc A Division of VMware, Inc. -------------------- Zimbra :: the leader in open source messaging and collaboration

1 0

(ITS#6961) back-bdb/hdb search performance issue
by hyc＠OpenLDAP.org 01 Jun '11

01 Jun '11

Full_Name: Howard Chu Version: HEAD/RE24 OS: URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (76.94.188.8) Submitted by: hyc See this thread for background http://www.openldap.org/lists/openldap-technical/201011/msg00146.html Currently when returning the entries in an IDL range, back-bdb search.c just iterates through all the values in the range. If a lot of entries have been deleted within this range a lot of time is wasted calling into BDB to fetch entryIDs that don't exist. Strictly speaking this performance loss can be avoided by simply using a cursor on the id2entry DB, and using DB_NEXT to fetch the next entry that exists. However, while that approach provides uniform search performance, it's also always about 2x slower than the best-case where we just iterate through the IDL. Also if we keep a cursor like this open for the entire search operation, it will leave all of those entries read-locked until the search completes. (Note that an MVCC approach, like for back-mdb, would not have this latter problem.) The current patch continues to use the IDL iterator, but if the next iterated ID comes up as nonexistent, then we check for the next ID in the DB. We use the same approach as the online indexer to avoid taking any long-term locks: create a cursor, use DB_SET_RANGE to get the next ID, and then close the cursor, thus freeing its locks. This way the ideal case (all consecutive entries exist) remains fast, and the performance hit of asking BDB is only incurred when necessary. Testing shows that search performance remains uniform and within 1% of the ideal case.

1 0

(ITS#6960) Out of memory erro occurs when running LDAP
by ArunPrasathSevugan＠oracle.com 31 May '11

31 May '11

Full_Name: Arun Prasath Version: 3 OS: Window Xp URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (220.225.129.57) Hi, We have a tool integrated with LDAP to load all the users in Cognos reporting. There are about 5000+ users and while running LDAPCONFIG we have been getting out of memory exception issue. In the task manage I could see the LDAP is using memory of around 3 GB and finally errors out. Please help us to load the 5000+ users. Thanks, Arun

1 0

(ITS#6959) ldap_dnfree not mentioned anywhere
by frank.muzzulini＠comsoft.aero 31 May '11

31 May '11

Full_Name: Frank Muzzulini Version: 2.4.25 OS: Linux URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (91.221.120.78) Hi, Reading the documentation of ldap_str2dn I was wondering how to free the allocated DN. After browsing for a while I loaded the latest tarball to see some example code and found ldap_dnfree. I re-checked and indeed the function is not mentioned anywhere in the docs ("find doc -type f | xargs grep ldap_dnfree" found nothing). Regards, Frank

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openldap-bugs