- openldap-bugs - openldap.org

Re: (ITS#5274) add search to online docs
by h.b.furuseth＠usit.uio.no 16 Dec '07

16 Dec '07

kurt(a)OpenLDAP.org writes: > Right, not everyone knows how to make the fullest of the tools > available to them, or even know what tools are available to them. I > don't see providing yet another tool as a solution to these problems. I thought I was suggesting (an interface to) an existing tool - and teaching a way to use that as an added bonus. A matter of semantics I guess. -- Regards, Hallvard

1 0

Re: (ITS#5274) add search to online docs
by kurt＠OpenLDAP.org 16 Dec '07

16 Dec '07

On Dec 13, 2007, at 4:47 AM, Hallvard B Furuseth wrote: > kurt(a)OpenLDAP.org writes: >> There are lots of existing ways of searching an admin guide. >> >> First, most web search engines can be told to localize their search >> to >> a set of pages. For instance: >> http://www.google.com/search?q=site:www.openldap.org/doc/ >> admin24+rwm > > Not everyone knows how to do that. Right, not everyone knows how to make the fullest of the tools available to them, or even know what tools are available to them. I don't see providing yet another tool as a solution to these problems. -- Kurt

1 0

Re: (ITS#5285) password policy checks userPassword hash even without policies
by hyc＠symas.com 15 Dec '07

15 Dec '07

mbackes(a)symas.com wrote: > Full_Name: Matthew Backes > Version: 2.3, 2.4, head, etc > OS: all > URL: ftp://ftp.openldap.org/incoming/ > Submission from: (NULL) (67.115.65.234) > > > When receiving a new userPassword, slapo-ppolicy checks to see if that password > matches the hash already present in userPassword, and disallows it if this is > the case. > > This is a sensible default for most circumstances, as otherwise the user could > reset their age counters by using the same password. > > Unfortunately, it also blocks arguably-legitimate password changes; e.g. when > migration to SSHA from CRYPT where the first 8 chars of the new password match > the old. > > This patch changes this userPassword-has-changed check to only apply if there is > a password policy defined which requires it; in particular, any of pwdInHistory, > pwdMinAge, pwdMaxAge, pwdCheckQuality, or pwdMustChange must apply for this > check to be enforced. Rereading draft-behera, it says 5.2.4 pwdInHistory This attribute specifies the maximum number of used passwords stored in the pwdHistory attribute. If this attribute is not present, or if the value is 0, used passwords are not stored in the pwdHistory attribute and thus may be reused. As such the test can be simplified. Committing to HEAD. -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

ITS#5145 Automatic groups overlay
by hyc＠symas.com 15 Dec '07

15 Dec '07

I did some minor cleanup and committed this. I think there may be other changes that could be made, to take advantage of sorted values and so cut down on the overhead of managing groups with large numbers of members. -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

Re: ITS#3515 ACLs enhancements
by ando＠sys-net.it 15 Dec '07

15 Dec '07

hyc(a)symas.com wrote: > This looks mostly like ACI to me, with some special inheritance rules. Is it > still relevant? AFAIR that was a custom ACL checking development that I found interesting from a technical point of view but (I might be wrong) of limited usefulness outside the scope it was developed for. In the meanwhile, and probably triggered by that posting, I added several ways of customizing access checking: via overlays, using dynacl (that was added earlier, for the purpose of isolating ACIs, but it could have served the same purpose). In this sense, I don't think this contribution can be of any use right now; it coulr be turned into a dynacl for custom use by the posters, or by anyone who find it useful. p. Ing. Pierangelo Masarati OpenLDAP Core Team SysNet s.r.l. via Dossi, 8 - 27100 Pavia - ITALIA http://www.sys-net.it --------------------------------------- Office: +39 02 23998309 Mobile: +39 333 4963172 Email: pierangelo.masarati(a)sys-net.it ---------------------------------------

1 0

Re: ITS#4987 slapo-constraint improvement
by hyc＠symas.com 14 Dec '07

14 Dec '07

hyc(a)symas.com wrote: > In reviewing the patch, I see several small details that need to be fixed. > E.g., you added a config keyword but re-used an existing OID for your new > attribute. OIDs must never be re-used, and certainly you must not use two > different attributes with the same OID. Oh never mind, I see the confusion. You're just defining a new 2nd argument to the existing keyword. > You use strlen/strncat, which are heavily discouraged in our code. (We never > use strcat/strncat; we use strlen only when it's unavoidable.) (Some uses of > strlen already existed in constraint.c; we just didn't get around to > eliminating them.) In general we use bervals instead of flat strings, and > there's almost never a reason to count string lengths at runtime. > > I got 3 rejects when applying the patch to my source tree (current HEAD). > > I think these points can all be cleaned up pretty easily. Let me know if you > need any particular pointers. I'm working on getting this to build now. -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

ITS#4987 slapo-constraint improvement
by hyc＠symas.com 14 Dec '07

14 Dec '07

In reviewing the patch, I see several small details that need to be fixed. E.g., you added a config keyword but re-used an existing OID for your new attribute. OIDs must never be re-used, and certainly you must not use two different attributes with the same OID. You use strlen/strncat, which are heavily discouraged in our code. (We never use strcat/strncat; we use strlen only when it's unavoidable.) (Some uses of strlen already existed in constraint.c; we just didn't get around to eliminating them.) In general we use bervals instead of flat strings, and there's almost never a reason to count string lengths at runtime. I got 3 rejects when applying the patch to my source tree (current HEAD). I think these points can all be cleaned up pretty easily. Let me know if you need any particular pointers. -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

ITS#4366 userPassword compare
by hyc＠symas.com 14 Dec '07

14 Dec '07

I think this is in general a bad idea. It's already noted as such in the README, which is fine. The code generally looks pretty good, although it would need to be updated for cn=config support. Does anyone else see a reason to integrate this and get it working with cn=config? -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

ITS#3515 ACLs enhancements
by hyc＠symas.com 14 Dec '07

14 Dec '07

This looks mostly like ACI to me, with some special inheritance rules. Is it still relevant? -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

(ITS#5285) password policy checks userPassword hash even without policies
by mbackes＠symas.com 14 Dec '07

14 Dec '07

Full_Name: Matthew Backes Version: 2.3, 2.4, head, etc OS: all URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (67.115.65.234) When receiving a new userPassword, slapo-ppolicy checks to see if that password matches the hash already present in userPassword, and disallows it if this is the case. This is a sensible default for most circumstances, as otherwise the user could reset their age counters by using the same password. Unfortunately, it also blocks arguably-legitimate password changes; e.g. when migration to SSHA from CRYPT where the first 8 chars of the new password match the old. This patch changes this userPassword-has-changed check to only apply if there is a password policy defined which requires it; in particular, any of pwdInHistory, pwdMinAge, pwdMaxAge, pwdCheckQuality, or pwdMustChange must apply for this check to be enforced. RCS file: /repo/OpenLDAP/pkg/ldap/servers/slapd/overlays/ppolicy.c,v retrieving revision 1.110 diff -u -r1.110 ppolicy.c --- ppolicy.c 17 Nov 2007 12:39:19 -0000 1.110 +++ ppolicy.c 15 Dec 2007 03:21:27 -0000 @@ -1776,7 +1776,13 @@ * Last check - the password history. */ /* FIXME: no access checking? */ - if (slap_passwd_check( op, NULL, pa, bv, &txt ) == LDAP_SUCCESS) { + if (( pp.pwdInHistory + || pp.pwdMinAge + || pp.pwdMaxAge + || pp.pwdCheckQuality + || pp.pwdMustChange ) /* make sure we care */ + && ( slap_passwd_check( op, NULL, pa, bv, &txt ) + == LDAP_SUCCESS )) { /* * This is bad - it means that the user is attempting * to set the password to the same as the old one.

1 0

ITS#3429 schema download module
by hyc＠symas.com 14 Dec '07

14 Dec '07

I was looking at this code in relation to current HEAD/RE24, and things have changed quite a bit. Given the ability to dynamically load schema into cn=config, is there still a need for this module? (It is in fact the changes made for dynamic schema manipulation in slapd that causes the compatibility issues with this module.) -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

ITS#4398 unique overlay enhancement
by hyc＠symas.com 14 Dec '07

14 Dec '07

Thanks for your patches. A more extensive version of these features was added in OpenLDAP 2.4 (March 2007). This ITS will be closed. -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

Re: (ITS#5263) ldap_parse_sasl_bind_result() returning wrong error code
by hyc＠symas.com 14 Dec '07

14 Dec '07

rhafer(a)suse.de wrote: > Full_Name: Ralf Haferkamp > Version: HEAD, RE23, RE24 > OS: - > URL: ftp://ftp.openldap.org/incoming/ > Submission from: (NULL) (89.166.205.58) > > > According to the man-pages and the C-API draft the ldap_parse_*_result() > functions return LDAP_SUCCESS, when the result was successfully parsed, > otherwise != LDAP_SUCCESS. > The current implementation of ldap_parse_sasl_bind_result() (not sure about > ldap_parse_extended_result()) however will return the LDAP Error Code of the > passwd LDAPMessages as the result (e.g. LDAP_SASL_BIND_IN_PROGRESS). > > If this is the desired behavior we should fix our documentation. But I guess > this is a bug in ldap_parse_sasl_bind_result() and probably > ldap_parse_extended_result(). Fixed in HEAD. ldap_parse_extended_result() was correct. -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

Re: (ITS#5284) cn=config overlay order
by hyc＠symas.com 14 Dec '07

14 Dec '07

dhawes(a)vt.edu wrote: > Full_Name: David Hawes > Version: 2.3.39/2.4.6 > OS: Debian GNU/Linux > URL: > Submission from: (NULL) (96.228.44.90) > > > Overlays are processed in the reverse order of slapd.conf when using slapd.d. Thanks for the report, this is now fixed in CVS HEAD. -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

(ITS#5284) cn=config overlay order
by dhawes＠vt.edu 14 Dec '07

14 Dec '07

Full_Name: David Hawes Version: 2.3.39/2.4.6 OS: Debian GNU/Linux URL: Submission from: (NULL) (96.228.44.90) Overlays are processed in the reverse order of slapd.conf when using slapd.d. If I have the following in slapd.conf: ... overlay overlay1 overlay overlay2 overlay overlay3 ... and convert it to slapd.d, I will see the following in cn=config: ... # {0}overlay3, {1}bdb, config dn: olcOverlay={0}overlay3,olcDatabase={1}bdb,cn=config objectClass: olcOverlayConfig olcOverlay: {0}overlay3 # {1}overlay2, {1}bdb, config dn: olcOverlay={1}overlay2,olcDatabase={1}bdb,cn=config objectClass: olcOverlayConfig olcOverlay: {1}overlay2 # {2}overlay1, {1}bdb, config dn: olcOverlay={2}overlay1,olcDatabase={1}bdb,cn=config objectClass: olcOverlayConfig olcOverlay: {2}overlay1 ... When slapd is started with slapd.conf, the overlay stack is correct (overlay3 -> overlay2 -> overlay1 for processing order), although cn=config reports the above. When slapd.d is used, the overlay stack is the opposite (overlay1 -> overlay2 -> overlay3). This occurs in both 2.3.39 and 2.4.6. I see this as a problem in situations where order of overlays is important (syncprov comes to mind).

1 0

Re: (ITS#5280) JLDAP waits for response for request which hasn't been sent because of connection shutdown
by M.Waldowski＠sulechow.net 14 Dec '07

14 Dec '07

Hello. I didn't know that pastes from rafb.net are removed after 24 hours. The new location of thread dump is here: http://www.sulechow.net/~mwaldows/ITS-5280/thread-dump.log and new location of JLDAP debug is here: http://www.sulechow.net/~mwaldows/ITS-5280/debug.log Regards Marcin M.Waldowski(a)sulechow.net wrote: > Full_Name: Marcin Waldowski > Version: novell-jldap-devel-2007.10.12-1netware_windows > OS: Windows XP > URL: > Submission from: (NULL) (83.20.102.205) > > > Hello. > > Our application gets lots of information from LDAP server which uses refferals. > Code which use jldap is executed in single thread. After some time of obtaining > informations JLDAP hangs in MessageAgent.getLDAPMessage() as you can see at > following thread dump: > > http://rafb.net/p/kwhTyh67.html > > It is repeatable every time we execute our application. It hangs always in the > same line of JLDAP code. > > We turned on jldap debug (-Dldap.debug=TraceAll) and also sniffed communication > between JLDAP and LDAP server using Wireshark. Interesting part of JLDAP debug > you can see here: > > http://rafb.net/p/diqKzz11.html > > As you can see some refferal connections is lost in lines 14, 35, 53. After that > we have some writes to that connections in lines 240 (message 146), 283 > (message 147) and 333 (message 148). All this writes didn't come to the wire (as > we can see in Wireshark or rather cannot see) because of "java.io.IOException: > Output stream not initialized". This exception is only logged to debug stream > and silently discarded in com.novell.ldap.Connection.writeMessage(LDAPMessage > msg) because variable clientActive is false. So, If I understand it correctly, > caller code doesn't know that anything goes wrong in called (write message) > code. As a result JLDAP still wait for responses of messages 146, 147, 148 which > hasn't been sent. This ends up with forever wait in line 368 of debug stream. > > Regards > Marcin > > >

1 0

(ITS#5280) JLDAP waits for response for request which hasn't been sent because of connection shutdown
by M.Waldowski＠sulechow.net 14 Dec '07

14 Dec '07

Full_Name: Marcin Waldowski Version: novell-jldap-devel-2007.10.12-1netware_windows OS: Windows XP URL: Submission from: (NULL) (83.20.102.205) Hello. Our application gets lots of information from LDAP server which uses refferals. Code which use jldap is executed in single thread. After some time of obtaining informations JLDAP hangs in MessageAgent.getLDAPMessage() as you can see at following thread dump: http://rafb.net/p/kwhTyh67.html It is repeatable every time we execute our application. It hangs always in the same line of JLDAP code. We turned on jldap debug (-Dldap.debug=TraceAll) and also sniffed communication between JLDAP and LDAP server using Wireshark. Interesting part of JLDAP debug you can see here: http://rafb.net/p/diqKzz11.html As you can see some refferal connections is lost in lines 14, 35, 53. After that we have some writes to that connections in lines 240 (message 146), 283 (message 147) and 333 (message 148). All this writes didn't come to the wire (as we can see in Wireshark or rather cannot see) because of "java.io.IOException: Output stream not initialized". This exception is only logged to debug stream and silently discarded in com.novell.ldap.Connection.writeMessage(LDAPMessage msg) because variable clientActive is false. So, If I understand it correctly, caller code doesn't know that anything goes wrong in called (write message) code. As a result JLDAP still wait for responses of messages 146, 147, 148 which hasn't been sent. This ends up with forever wait in line 368 of debug stream. Regards Marcin

2 1

Re: (ITS#5273) ldap.conf and TLS as a default
by hyc＠symas.com 14 Dec '07

14 Dec '07

This appears to be the same as ITS#5039. This ITS will be closed, you can followup to #5039. cardoe(a)gentoo.org wrote: > Full_Name: Douglas Klima > Version: 2.3. > OS: Linux > URL: > Submission from: (NULL) (216.155.111.10) > > > I was looking for a way to make TLS the default in > /etc/openldap/ldap.conf however it currently seems impossible. You can > specify LDAP over clear text and LDAP over SSL but you can't specify > LDAP over TLS (I'm talking about "start_tls"). It seems like ldaps:// is > deprecated in favor of ldap:// + TLS, which is why I'm trying to > configure this. > > Currently my /etc/openldap/ldap.conf looks like: > BASE dc=example,dc=com > URI ldap://srv1.example.com ldap://srv2.example.com > TLS_REQCERT demand > TLS_CACERTDIR /etc/ssl/certs > > If I do the following: > $ ldapsearch > ldap_bind: Confidentiality required (13) > additional info: TLS confidentiality required > > If I change URI to have "ldaps://srv1.example.com:389", then > $ ldapsearch > just hangs until it times out. Clearly it's not using start_tls. > > Now if I change URI back to it's original setting and do: > > $ ldapsearch -Z > .... > # search result > search: 3 > result: 0 Success > > # numResponses: 54 > # numEntries: 53 > > I get a successful lookup. I'm basically looking for a way to pass "-Z" > in /etc/openldap/ldap.conf and in .ldaprc > > Initially I tried to send this to the OpenLDAP ML but was told by MacJobBz to > submit this to ITS. > > > -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

(ITS#5283) translucent search enhancement
by hyc＠OpenLDAP.org 14 Dec '07

14 Dec '07

Full_Name: Howard Chu Version: HEAD/RE24 OS: URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (76.91.220.157) Submitted by: hyc Currently the translucent overlay only searches the remote database, then matches local entries to the results. It needs to be able to search the local database as well.

1 0

Re: (ITS#5276) include handler broken
by quanah＠zimbra.com 13 Dec '07

13 Dec '07

--On December 13, 2007 1:17:08 AM +0000 quanah(a)zimbra.com wrote: > Full_Name: Quanah Gibson-Mount > Version: 2.3.39 Also broken in OpenLDAP 2.4.7. This config works as expected: include "/usr/local/etc/openldap/schema/core.schema" include "/usr/local/etc/openldap/schema/cosine.schema" include "/usr/local/etc/openldap/schema/inetorgperson.schema" threads 8 pidfile "/var/run/slapd.pid" argsfile "/var/run/slapd.args" loglevel 256 modulepath /usr/local/lib/openldap moduleload back_bdb.la moduleload back_hdb.la moduleload back_monitor.la moduleload syncprov.la moduleload accesslog.la access to * by * write database config rootpw secret database bdb suffix "" rootdn "cn=config" cachesize 10000 idlcachesize 10000 checkpoint 64 5 directory "/usr/local/openldap-data" index objectClass eq index uid pres,eq index mail pres,eq,sub index cn pres,eq,sub index displayName pres,eq,sub index sn pres,eq,sub index gn pres,eq,sub index entryUUID eq index entryCSN eq sizelimit unlimited timelimit unlimited overlay syncprov syncprov-checkpoint 100 10 syncprov-sessionlog 500 Modifying it so that it is now: include "/usr/local/etc/openldap/schema/core.schema" include "/usr/local/etc/openldap/schema/cosine.schema" include "/usr/local/etc/openldap/schema/inetorgperson.schema" threads 8 pidfile "/var/run/slapd.pid" argsfile "/var/run/slapd.args" loglevel 256 modulepath /usr/local/lib/openldap moduleload back_bdb.la moduleload back_hdb.la moduleload back_monitor.la moduleload syncprov.la moduleload accesslog.la access to * by * write database config rootpw secret include /usr/local/etc/openldap/bdb-conf include /usr/local/etc/openldap/overlays-conf Where bdb-conf is: database bdb suffix "" rootdn "cn=config" cachesize 10000 idlcachesize 10000 checkpoint 64 5 directory "/usr/local/openldap-data" index objectClass eq index uid pres,eq index mail pres,eq,sub index cn pres,eq,sub index displayName pres,eq,sub index sn pres,eq,sub index gn pres,eq,sub index entryUUID eq index entryCSN eq sizelimit unlimited timelimit unlimited and overlays-conf is: overlay syncprov syncprov-checkpoint 100 10 syncprov-sessionlog 500 The contextCSN is never created in the root database, whereas in the former example it is. I did other experiments with a more complicated config, and managed to completely lock up slapd as well. --Quanah -- Quanah Gibson-Mount Principal Software Engineer Zimbra, Inc -------------------- Zimbra :: the leader in open source messaging and collaboration

1 0

Re: (ITS#5161) delta-syncrepl mutex lockup
by quanah＠zimbra.com 13 Dec '07

13 Dec '07

Verified fix for 2.3 works for me. --Quanah --On December 5, 2007 3:27:07 PM +0000 quanah(a)zimbra.com wrote: > Just to note, Howard tracked this down to the overlay not handling > abandonding clients. i.e., I can trigger this behavior repeatably by > issuing 3 async deletes to the master and then unbinding without waiting > for the results of the deletes. Sync deletes obviously do not trigger > this. > > --Quanah > > -- > > Quanah Gibson-Mount > Principal Software Engineer > Zimbra, Inc > -------------------- > Zimbra :: the leader in open source messaging and collaboration > > -- Quanah Gibson-Mount Principal Software Engineer Zimbra, Inc -------------------- Zimbra :: the leader in open source messaging and collaboration

1 0

Re: (ITS#5282) refreshAndPersist can miss changes if error occurs
by hyc＠symas.com 13 Dec '07

13 Dec '07

quanah(a)zimbra.com wrote: > Full_Name: Quanah Gibson-Mount > Version: 2.3.39 > OS: > URL: ftp://ftp.openldap.org/incoming/ > Submission from: (NULL) (76.21.80.71) > > > If one is using refreshAndPersist with syncrepl, and an error occurs during a > change, the contextCSN will not be updated. However, if a /new/ change comes in > after that, that is successful, the CSN will be updated, and the missed change > is lost. This can happen, for example, if the replica runs out of locks while > making the change. It would be best then, if this happens, for the replica to > drop out of persist mode. This is a good reason to set an interval with this > mode. This was fixed in HEAD in January 2006. So the fix is in all 2.4 releases, but never made it into RE23. -- -- Howard Chu Chief Architect, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

1 0

(ITS#5282) refreshAndPersist can miss changes if error occurs
by quanah＠zimbra.com 13 Dec '07

13 Dec '07

Full_Name: Quanah Gibson-Mount Version: 2.3.39 OS: URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (76.21.80.71) If one is using refreshAndPersist with syncrepl, and an error occurs during a change, the contextCSN will not be updated. However, if a /new/ change comes in after that, that is successful, the CSN will be updated, and the missed change is lost. This can happen, for example, if the replica runs out of locks while making the change. It would be best then, if this happens, for the replica to drop out of persist mode. This is a good reason to set an interval with this mode.

1 0

(ITS#5281) doc contribution - set examples - following references
by andreas＠mandriva.com.br 13 Dec '07

13 Dec '07

Full_Name: Andreas Hasenack Version: 2.4.6 OS: Linux URL: http://users.mandriva.com.br/~andreas/ldap-doc/doc-set-examples/set-followi… Submission from: (NULL) (200.140.247.99) http://users.mandriva.com.br/~andreas/ldap-doc/doc-set-examples/set-followi… Documentation contribution with further examples regarding the usage of sets in ACLs. This time, using a user/manager/secretary/group example. These files are derived from OpenLDAP Software. All of the modifications to OpenLDAP Software represented in the following patch(es) were developed by Andreas Hasenack <andreas(a)mandriva.com.br>. These modifications are not subject to any license of Mandriva. I, Andreas Hasenack, hereby place the following modifications to OpenLDAP Software (and only these modifications) into the public domain. Hence, these modifications may be freely used and/or redistributed for any purpose with or without attribution and/or other notice.

1 0

(ITS#5279) doc contribution - set examples - memberUid
by andreas＠mandriva.com.br 13 Dec '07

13 Dec '07

Full_Name: Andreas Hasenack Version: 2.4.6 OS: Linux URL: http://users.mandriva.com.br/~andreas/ldap-doc/doc-set-examples/set-memberU… Submission from: (NULL) (200.140.247.99) http://users.mandriva.com.br/~andreas/ldap-doc/doc-set-examples/set-memberU… Documentation contribution explaining how to use sets to emulate group ACLs when the member attribute is not in the DN syntax (like posixGroup as defined in RFC2307). These files are derived from OpenLDAP Software. All of the modifications to OpenLDAP Software represented in the following patch(es) were developed by Andreas Hasenack <andreas(a)mandriva.com.br>. These modifications are not subject to any license of Mandriva. I, Andreas Hasenack, hereby place the following modifications to OpenLDAP Software (and only these modifications) into the public domain. Hence, these modifications may be freely used and/or redistributed for any purpose with or without attribution and/or other notice.

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openldap-bugs