openldap-bugs January 2024

openldap-bugs@openldap.org

1 participants
124 discussions

[Issue 10140] New: Add microsecond timestamp format for local file logging
by openldap-its＠openldap.org 22 May '25

22 May '25

https://bugs.openldap.org/show_bug.cgi?id=10140 Issue ID: 10140 Summary: Add microsecond timestamp format for local file logging Product: OpenLDAP Version: 2.6.6 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: gnoe(a)symas.com Target Milestone: --- Add microsecond-level timestamps to local file logging. Format is: "YYYY-mm-ddTHH:MM:SS.ffffffZ" The attached patch file is derived from OpenLDAP Software. All of the modifications to OpenLDAP Software represented in the following patch(es) were developed by Gregory Noe gnoe(a)symas.com. I have not assigned rights and/or interest in this work to any party. The attached modifications to OpenLDAP Software are subject to the following notice: Copyright 2023 Gregory Noe Redistribution and use in source and binary forms, with or without modification, are permitted only as authorized by the OpenLDAP Public License. -- You are receiving this mail because: You are on the CC list for the issue.

1 10

[Issue 10020] New: dynlist's @groupOfUniqueNames is considered only for the first configuration line
by openldap-its＠openldap.org 22 May '25

22 May '25

https://bugs.openldap.org/show_bug.cgi?id=10020 Issue ID: 10020 Summary: dynlist's @groupOfUniqueNames is considered only for the first configuration line Product: OpenLDAP Version: 2.5.13 Hardware: x86_64 OS: Linux Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: overlays Assignee: bugs(a)openldap.org Reporter: msl(a)touk.pl Target Milestone: --- If we consider the following configuration of dynlist: {0}toukPerson labeledURI uniqueMember+memberOf@groupOfUniqueNames {1}groupOfURLs memberURL uniqueMember+dgMemberOf@groupOfUniqueNames The {0} entry will correctly populate the memberOf relatively to static group membership. The {1} entry will produce dgMemberOf with dynamic group membership correctly (based on memberURL query) but it will not populate static entries IF {0} entry in configuration is present. IF I remove {0} from the dynlist configuration - or - remove @groupOfUniqueNames part from this configuration line, then both dynamic and static entries will be populated correctly for {1}. So the effects are as follows on some user entry: if both {0} and {1} are present - {1} produced only dynamic groups: memberOf: cn=adm,ou=touk,ou=group,dc=touk,dc=pl memberOf: cn=touk,ou=touk,ou=group,dc=touk,dc=pl dgMemberOf: cn=dyntouk,ou=dyntest,ou=group,dc=touk,dc=pl if both {0} and {1} are present and @groupOfUniqueNames is removed from {0} - {1} produced static+dynamic groups: dgMemberOf: cn=adm,ou=touk,ou=group,dc=touk,dc=pl dgMemberOf: cn=touk,ou=touk,ou=group,dc=touk,dc=pl dgMemberOf: cn=dyntouk,ou=dyntest,ou=group,dc=touk,dc=pl If only {1} is present - {1} produced static+dynamic groups: dgMemberOf: cn=adm,ou=touk,ou=group,dc=touk,dc=pl dgMemberOf: cn=touk,ou=touk,ou=group,dc=touk,dc=pl dgMemberOf: cn=dyntouk,ou=dyntest,ou=group,dc=touk,dc=pl For completness - if only {0} is present: memberOf: cn=adm,ou=touk,ou=group,dc=touk,dc=pl memberOf: cn=touk,ou=touk,ou=group,dc=touk,dc=pl I would expect this behavior to be correct for the first case - {0} and {1}. memberOf: cn=adm,ou=touk,ou=group,dc=touk,dc=pl memberOf: cn=touk,ou=touk,ou=group,dc=touk,dc=pl dgMemberOf: cn=dyntouk,ou=dyntest,ou=group,dc=touk,dc=pl dgMemberOf: cn=adm,ou=touk,ou=group,dc=touk,dc=pl dgMemberOf: cn=touk,ou=touk,ou=group,dc=touk,dc=pl -- You are receiving this mail because: You are on the CC list for the issue.

1 14

[Issue 9934] New: slapd-config(5) should document how to store certificates for slapd usage
by openldap-its＠openldap.org 22 May '25

22 May '25

https://bugs.openldap.org/show_bug.cgi?id=9934 Issue ID: 9934 Summary: slapd-config(5) should document how to store certificates for slapd usage Product: OpenLDAP Version: 2.5.13 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: documentation Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- Commit 7b41feed83b expanded the ability of cn=config to save the certificates used for TLS by slapd directly in the config database. However the documentation for the new parameters was never added to the slapd-config(5) man page. olcTLSCACertificate $ olcTLSCertificate $ olcTLSCertificateKey -- You are receiving this mail because: You are on the CC list for the issue.

1 13

[Issue 10163] New: Cleanup configure/test integration
by openldap-its＠openldap.org 06 May '25

06 May '25

https://bugs.openldap.org/show_bug.cgi?id=10163 Issue ID: 10163 Summary: Cleanup configure/test integration Product: OpenLDAP Version: 2.6.6 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: build Assignee: bugs(a)openldap.org Reporter: hyc(a)openldap.org Target Milestone: --- The sed commandline configure uses to perform substitutions is getting unwieldy and may be exceeding platform limits on various systems. All of the BUILD_xxx substitutions for overlays are only used in tests/run.in. They could be completely removed, and instead each of the enabled overlays could be emitted into a separate file that just gets included by the test scripts. There's no need for them to be part of the sed invocation at all. There's also leftover BUILD_xxx cruft from backends that we've removed (e.g. back-shell BUILD_SHELL) that nothing else in the tree references any more. -- You are receiving this mail because: You are on the CC list for the issue.

1 5

[Issue 9367] New: back-mdb: encryption support
by openldap-its＠openldap.org 06 May '25

06 May '25

https://bugs.openldap.org/show_bug.cgi?id=9367 Issue ID: 9367 Summary: back-mdb: encryption support Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: backends Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- Need to add encryption support to the back-mdb backend, depends on issue#9364 -- You are receiving this mail because: You are on the CC list for the issue.

1 8

[Issue 10026] New: Refresh handling can skip entries (si_dirty not managed properly)
by openldap-its＠openldap.org 25 Mar '25

25 Mar '25

https://bugs.openldap.org/show_bug.cgi?id=10026 Issue ID: 10026 Summary: Refresh handling can skip entries (si_dirty not managed properly) Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: overlays Assignee: bugs(a)openldap.org Reporter: ondra(a)mistotebe.net Target Milestone: --- Take MPR plain syncrepl with 3+ providers. When a provider's own syncrepl session transitions to persist and a it starts a new parallel session towards another host, that session always has to start as a refresh. If that refresh serves entries to us, our handling of si_dirty is not consistent: - if the existing persist session serves some of these entries to us, we can "forget" to pass the others to a newly connected consumer - same if the refresh is abandoned and we start refreshing from a different provider that might be behind what we were being served (again our consumers could suffer) - if we restart, si_dirty is forgotten and our consumers suffer even worse We might need to be told (at the beginning of the refresh?) what the end state we're going for is, so we can keep si_dirty on until then. And somehow persist that knowledge in the DB... -- You are receiving this mail because: You are on the CC list for the issue.

1 9

[Issue 10162] New: Fix for binary attributes data corruption in back-sql
by openldap-its＠openldap.org 25 Mar '25

25 Mar '25

https://bugs.openldap.org/show_bug.cgi?id=10162 Issue ID: 10162 Summary: Fix for binary attributes data corruption in back-sql Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: backends Assignee: bugs(a)openldap.org Reporter: dex.tracers(a)gmail.com Target Milestone: --- Created attachment 1006 --> https://bugs.openldap.org/attachment.cgi?id=1006&action=edit Fix for binary attributes corruption on backed-sql I've configured slapd to use back-sql (mariadb through odbc) and observed issues with the BINARY data retrievals from the database. The length of the attributes was properly reported, but the correct data inside was always 16384 bytes and after that point - some junk (usually filled-up with AAAAAAAA and some other attributes data from memory). During the debugging - I've noticed that: - The MAX_ATTR_LEN (16384 bytes) is used to set the length of the data for BINARY columns when SQLBindCol is done inside of the "backsql_BindRowAsStrings_x" function - After SQLFetch is done - data in row->cols[i] is fetched up to the specified MAX_ATTR_LEN - After SQLFetch is done - the correct data size (greater than MAX_ATTR_LEN) is represented inside of the row->value_len I'm assuming that slapd allocates the pointer in memory (row->cols[i]), fills it with the specified amount of data (MAX_ATTR_LEN), but when forming the actual attribute data - uses the length from row->value_len and so everything from 16384 bytes position till row->value_len is just a junk from the memory (uninitialized, leftovers, data from other variables). After an investigation, I've find-out that: - for BINARY or variable length fields - SQLGetData should be used - SQLGetData supports chunked mode (if length is unknown) or full-read mode if the length is known - it could be used in pair with SQLBindCol after SQLFetch (!) Since we have the correct data length inside of row->value_len, I've just added the code to the backsql_get_attr_vals() function to overwrite the corrupted data with the correct data by issuing SQLGetData request. And it worked - binary data was properly retrieved and reported over LDAP! My current concerns / help needed - I'm not very familiar with the memory allocation/deallocation mechanisms, so I'm afraid that mentioned change can lead to memory corruption (so far not observed). Please review attached patch (testing was done on OPENLDAP_REL_ENG_2_5_13, and applied on the master branch for easier review/application). -- You are receiving this mail because: You are on the CC list for the issue.

1 8

[Issue 10024] New: MDB_PREVSNAPSHOT broken
by openldap-its＠openldap.org 21 Feb '25

21 Feb '25

https://bugs.openldap.org/show_bug.cgi?id=10024 Issue ID: 10024 Summary: MDB_PREVSNAPSHOT broken Product: LMDB Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: liblmdb Assignee: bugs(a)openldap.org Reporter: markus(a)objectbox.io Target Milestone: --- It seems that the patch #9496 had a negative side effect on MDB_PREVSNAPSHOT. In certain cases, when opening the DB using MDB_PREVSNAPSHOT, the previous (2nd latest) commit is not selected. Instead, reads show that the latest commit was selected voiding the effect of MDB_PREVSNAPSHOT. I observed this in our test cases a while back. Today, I was finally able to reproduce it and debug into it. When creating the transaction to read the data, I debugged into mdb_txn_renew0. Here, ti (MDB_txninfo; env->me_txns) was non-NULL. However, ti->mti_txnid was 0 (!) and thus txn->mt_txnid was set to 0. That's the reason for always selecting the first (index 0) meta page inside mdb_txn_renew0: meta = env->me_metas[txn->mt_txnid & 1]; This line occurs twice (once for read txn and once for write txn; it affects both txn types). Thus, the chances of MDB_PREVSNAPSHOT selecting the correct meta page is 50-50. It's only correct if the first meta page (index 0) is the older one. I believe that this is related to #9496 because the patch, that was provided there, removed the initialization of "env->me_txns->mti_txnid" in mdb_env_open2. This would explain why txn->mt_txnid inside mdb_txn_renew0 was set to 0. I can confirm that adding back the following two lines back in fixes MDB_PREVSNAPSHOT: if (env->me_txns) env->me_txns->mti_txnid = meta.mm_txnid; The said patch including the removal of these two lines was applied in the commit(s) "ITS#9496 fix mdb_env_open bug from #8704" (Howard Chu on 09.04.21). I hope this information is useful to find a suitable fix. Please let me know if you have questions. Also, I'd be happy to help confirming a potential fix with our test suite. -- You are receiving this mail because: You are on the CC list for the issue.

1 7

[Bug 9186] New: RFE: More metrics in cn=monitor
by openldap-its＠openldap.org 19 Feb '25

19 Feb '25

https://bugs.openldap.org/show_bug.cgi?id=9186 Bug ID: 9186 Summary: RFE: More metrics in cn=monitor Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: backends Assignee: bugs(a)openldap.org Reporter: michael(a)stroeder.com Target Milestone: --- Currently I'm grepping metrics from syslog with mtail: https://gitlab.com/ae-dir/ansible-ae-dir-server/-/blob/master/templates/mta… With a new binary logging this is not possible anymore. Thus it would be nice if cn=monitor provides more metrics. 1. Overall connection count per listener starting at 0 when started. This would be a simple counter added to: entries cn=Listener 0,cn=Listeners,cn=Monitor 2. Counter for the various "deferring" messages separated by the reason for deferring. 3. Counters for all possible result codes. In my mtail program I also label it with the result type. -- You are receiving this mail because: You are on the CC list for the bug.

1 15

[Issue 10160] New: Add negset and negurl for slapo-constraint
by openldap-its＠openldap.org 19 Feb '25

19 Feb '25

https://bugs.openldap.org/show_bug.cgi?id=10160 Issue ID: 10160 Summary: Add negset and negurl for slapo-constraint Product: OpenLDAP Version: 2.6.6 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: overlays Assignee: bugs(a)openldap.org Reporter: manu(a)netbsd.org Target Milestone: --- Created attachment 1003 --> https://bugs.openldap.org/attachment.cgi?id=1003&action=edit Add negset and negurl for slapo-constraint Add negset and negurl constraints for slapo-constraint. THe two new types are logical not of set and url. They will fire a constraint violation if the set or LDAP URL query is non empty. -- You are receiving this mail because: You are on the CC list for the issue.

1 7

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openldap-bugs January 2024