openldap-bugs April 2023

openldap-bugs@openldap.org

1 participants
117 discussions

[Issue 9367] New: back-mdb: encryption support
by openldap-its＠openldap.org 06 May '25

06 May '25

https://bugs.openldap.org/show_bug.cgi?id=9367 Issue ID: 9367 Summary: back-mdb: encryption support Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: backends Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- Need to add encryption support to the back-mdb backend, depends on issue#9364 -- You are receiving this mail because: You are on the CC list for the issue.

1 8

[Issue 10024] New: MDB_PREVSNAPSHOT broken
by openldap-its＠openldap.org 21 Feb '25

21 Feb '25

https://bugs.openldap.org/show_bug.cgi?id=10024 Issue ID: 10024 Summary: MDB_PREVSNAPSHOT broken Product: LMDB Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: liblmdb Assignee: bugs(a)openldap.org Reporter: markus(a)objectbox.io Target Milestone: --- It seems that the patch #9496 had a negative side effect on MDB_PREVSNAPSHOT. In certain cases, when opening the DB using MDB_PREVSNAPSHOT, the previous (2nd latest) commit is not selected. Instead, reads show that the latest commit was selected voiding the effect of MDB_PREVSNAPSHOT. I observed this in our test cases a while back. Today, I was finally able to reproduce it and debug into it. When creating the transaction to read the data, I debugged into mdb_txn_renew0. Here, ti (MDB_txninfo; env->me_txns) was non-NULL. However, ti->mti_txnid was 0 (!) and thus txn->mt_txnid was set to 0. That's the reason for always selecting the first (index 0) meta page inside mdb_txn_renew0: meta = env->me_metas[txn->mt_txnid & 1]; This line occurs twice (once for read txn and once for write txn; it affects both txn types). Thus, the chances of MDB_PREVSNAPSHOT selecting the correct meta page is 50-50. It's only correct if the first meta page (index 0) is the older one. I believe that this is related to #9496 because the patch, that was provided there, removed the initialization of "env->me_txns->mti_txnid" in mdb_env_open2. This would explain why txn->mt_txnid inside mdb_txn_renew0 was set to 0. I can confirm that adding back the following two lines back in fixes MDB_PREVSNAPSHOT: if (env->me_txns) env->me_txns->mti_txnid = meta.mm_txnid; The said patch including the removal of these two lines was applied in the commit(s) "ITS#9496 fix mdb_env_open bug from #8704" (Howard Chu on 09.04.21). I hope this information is useful to find a suitable fix. Please let me know if you have questions. Also, I'd be happy to help confirming a potential fix with our test suite. -- You are receiving this mail because: You are on the CC list for the issue.

1 7

[Bug 9245] New: devel/programming needs rewrite
by openldap-its＠openldap.org 28 Jan '25

28 Jan '25

https://bugs.openldap.org/show_bug.cgi?id=9245 Bug ID: 9245 Summary: devel/programming needs rewrite Product: website Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: website Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- The information on the devel/programming web page is at least a decade out of date and needs a complete overhaul. -- You are receiving this mail because: You are on the CC list for the bug.

1 1

[Issue 9886] New: At "sync" logging, nothing shows how long a write op took on consumers
by openldap-its＠openldap.org 17 Dec '24

17 Dec '24

https://bugs.openldap.org/show_bug.cgi?id=9886 Issue ID: 9886 Summary: At "sync" logging, nothing shows how long a write op took on consumers Product: OpenLDAP Version: unspecified Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- If sync logging is enabled on a consumer, there's no etime logged which means it is not possible to see how long a write op took on that consumer. This can be useful information to see how the node is performing, particularly if it is a read only node where there will be no general MOD timing logged. -- You are receiving this mail because: You are on the CC list for the issue.

1 4

[Issue 9827] New: Feature request for module argon2.so to support Argon2i, Argon2d, Argon2id
by openldap-its＠openldap.org 26 Nov '24

26 Nov '24

https://bugs.openldap.org/show_bug.cgi?id=9827 Issue ID: 9827 Summary: Feature request for module argon2.so to support Argon2i, Argon2d, Argon2id Product: OpenLDAP Version: 2.6.1 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: juergen.sprenger(a)swisscom.com Target Milestone: --- Hi, This is a feature request. I would like to be able to chooses between Argon2i, Argon2d and Argon2id in slappasswd like in argon2 command: # argon2 Usage: argon2 [-h] salt [-i|-d|-id] [-t iterations] [-m log2(memory in KiB) | -k memory in KiB] [-p parallelism] [-l hash length] [-e|-r] [-v (10|13)] Password is read from stdin Parameters: salt The salt to use, at least 8 characters -i Use Argon2i (this is the default) -d Use Argon2d instead of Argon2i -id Use Argon2id instead of Argon2i -t N Sets the number of iterations to N (default = 3) -m N Sets the memory usage of 2^N KiB (default 12) -k N Sets the memory usage of N KiB (default 4096) -p N Sets parallelism to N threads (default 1) -l N Sets hash output length to N bytes (default 32) -e Output only encoded hash -r Output only the raw bytes of the hash -v (10|13) Argon2 version (defaults to the most recent version, currently 13) -h Print argon2 usage Example: /usr/local/etc/openldap # /usr/sbin/slappasswd -h "{ARGON2}" -o module-load="argon2.so i" -s secret /usr/local/etc/openldap # /usr/sbin/slappasswd -h "{ARGON2}" -o module-load="argon2.so d" -s secret /usr/local/etc/openldap # /usr/sbin/slappasswd -h "{ARGON2}" -o module-load="argon2.so id" -s secret Best regards Juergen Sprenger -- You are receiving this mail because: You are on the CC list for the issue.

1 7

[Issue 9952] New: Crash on exit with OpenSSL 3
by openldap-its＠openldap.org 26 Nov '24

26 Nov '24

https://bugs.openldap.org/show_bug.cgi?id=9952 Issue ID: 9952 Summary: Crash on exit with OpenSSL 3 Product: OpenLDAP Version: 2.6.2 Hardware: All OS: Linux Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: libraries Assignee: bugs(a)openldap.org Reporter: artur.zaprzala(a)gmail.com Target Milestone: --- A program using libldap will crash on exit after using SSL connection. How to reproduce on CentOS 9: Uncomment the following lines in /etc/pki/tls/openssl.cnf: [provider_sect] legacy = legacy_sect [legacy_sect] activate = 1 Run the command (you must enter a valid LDAP server address): python3 -c "import ldap; ldap.initialize('ldaps://<LDAP SERVER ADDRESS>').whoami_s()" Another example (no server required): python3 -c "import ctypes; ctypes.CDLL('libldap.so.2').ldap_pvt_tls_init_def_ctx(0)" Results: Segmentation fault (core dumped) Backtrace from gdb: Program received signal SIGSEGV, Segmentation fault. 0 ___pthread_rwlock_rdlock (rwlock=0x0) at pthread_rwlock_rdlock.c:27 1 0x00007ffff7c92f3d in CRYPTO_THREAD_read_lock (lock=<optimized out>) at crypto/threads_pthread.c:85 2 0x00007ffff7c8b126 in ossl_lib_ctx_get_data (ctx=0x7ffff7eff540 <default_context_int.lto_priv>, index=1, meth=0x7ffff7eb8a00 <provider_store_method.lto_priv>) at crypto/context.c:398 3 0x00007ffff7c98bea in get_provider_store (libctx=<optimized out>) at crypto/provider_core.c:334 4 ossl_provider_deregister_child_cb (handle=0x5555555ed620) at crypto/provider_core.c:1752 5 0x00007ffff7c8bf2f in ossl_provider_deinit_child (ctx=0x5555555d2650) at crypto/provider_child.c:279 6 OSSL_LIB_CTX_free (ctx=0x5555555d2650) at crypto/context.c:283 7 OSSL_LIB_CTX_free (ctx=0x5555555d2650) at crypto/context.c:276 8 0x00007ffff7634af6 in legacy_teardown (provctx=0x5555555ee9f0) at providers/legacyprov.c:168 9 0x00007ffff7c9901b in ossl_provider_teardown (prov=0x5555555ed620) at crypto/provider_core.c:1477 10 ossl_provider_free (prov=0x5555555ed620) at crypto/provider_core.c:683 11 0x00007ffff7c63956 in ossl_provider_free (prov=<optimized out>) at crypto/provider_core.c:668 12 evp_cipher_free_int (cipher=0x555555916c10) at crypto/evp/evp_enc.c:1632 13 EVP_CIPHER_free (cipher=0x555555916c10) at crypto/evp/evp_enc.c:1647 14 0x00007ffff7a6bc1d in ssl_evp_cipher_free (cipher=0x555555916c10) at ssl/ssl_lib.c:5925 15 ssl_evp_cipher_free (cipher=0x555555916c10) at ssl/ssl_lib.c:5915 16 SSL_CTX_free (a=0x555555ec1020) at ssl/ssl_lib.c:3455 17 SSL_CTX_free (a=0x555555ec1020) at ssl/ssl_lib.c:3392 18 0x00007fffe95edb89 in ldap_int_tls_destroy (lo=0x7fffe9616000 <ldap_int_global_options>) at /usr/src/debug/openldap-2.6.2-1.el9_0.x86_64/openldap-2.6.2/libraries/libldap/tls2.c:104 19 0x00007ffff7fd100b in _dl_fini () at dl-fini.c:138 20 0x00007ffff7873475 in __run_exit_handlers (status=0, listp=0x7ffff7a11658 <__exit_funcs>, run_list_atexit=run_list_atexit@entry=true, run_dtors=run_dtors@entry=true) at exit.c:113 21 0x00007ffff78735f0 in __GI_exit (status=<optimized out>) at exit.c:143 22 0x00007ffff785be57 in __libc_start_call_main (main=main@entry=0x55555556aa20 <main>, argc=argc@entry=4, argv=argv@entry=0x7fffffffe2b8) at ../sysdeps/nptl/libc_start_call_main.h:74 23 0x00007ffff785befc in __libc_start_main_impl (main=0x55555556aa20 <main>, argc=4, argv=0x7fffffffe2b8, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffe2a8) at ../csu/libc-start.c:409 24 0x000055555556b575 in _start () The problem is that ldap_int_tls_destroy() is called after the clean up of libssl. On program exit, at first default_context_int is cleaned up (OPENSSL_cleanup() was registered with atexit()): 0 ossl_lib_ctx_default_deinit () at crypto/context.c:196 1 OPENSSL_cleanup () at crypto/init.c:424 2 OPENSSL_cleanup () at crypto/init.c:338 3 0x00007ffff7873475 in __run_exit_handlers (status=0, listp=0x7ffff7a11658 <__exit_funcs>, run_list_atexit=run_list_atexit@entry=true, run_dtors=run_dtors@entry=true) at exit.c:113 4 0x00007ffff78735f0 in __GI_exit (status=<optimized out>) at exit.c:143 5 0x00007ffff785be57 in __libc_start_call_main (main=main@entry=0x55555556aa20 <main>, argc=argc@entry=4, argv=argv@entry=0x7fffffffe2c8) at ../sysdeps/nptl/libc_start_call_main.h:74 6 0x00007ffff785befc in __libc_start_main_impl (main=0x55555556aa20 <main>, argc=4, argv=0x7fffffffe2c8, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffe2b8) at ../csu/libc-start.c:409 7 0x000055555556b575 in _start () Then ossl_lib_ctx_get_data() tries to use default_context_int.lock, which is NULL. ldap_int_tls_destroy() is called by ldap_int_destroy_global_options(), registered by "__attribute__ ((destructor))". It seems that shared library destructors are always called before functions registered with atexit(). A solution may be to modify libraries/libldap/init.c to use atexit() instead of "__attribute__ ((destructor))". atexit() manual page says: "Since glibc 2.2.3, atexit() can be used within a shared library to establish functions that are called when the shared library is unloaded.". Functions registered with atexit() are called in the reverse order of their registration, so libssl must by initialized before libldap. If the order is wrong, libldap should detect it somehow and exit with abort(). -- You are receiving this mail because: You are on the CC list for the issue.

1 29

[Issue 9393] New: Provider a LDAP filter validation function
by openldap-its＠openldap.org 12 Nov '24

12 Nov '24

https://bugs.openldap.org/show_bug.cgi?id=9393 Issue ID: 9393 Summary: Provider a LDAP filter validation function Product: OpenLDAP Version: 2.4.56 Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: libraries Assignee: bugs(a)openldap.org Reporter: best(a)univention.de Target Milestone: --- In many situations I need to validate if a user submitted LDAP filter has valid syntax. It seems there is no official function to check this. Could you provide one? libraries/libldap/filter.c: ldap_pvt_put_filter() can be used as a basis. -- My current workaround is using a unconnected ldap connection and do a search with that filter. This yields a FILTER_ERROR (invalid filter) or a SERVER_DOWN error (invalid filter). See also: https://github.com/python-ldap/python-ldap/pull/272 -- You are receiving this mail because: You are on the CC list for the issue.

1 12

[Issue 9914] New: Add OS pagesize to the back-mdb monitor information
by openldap-its＠openldap.org 12 Nov '24

12 Nov '24

https://bugs.openldap.org/show_bug.cgi?id=9914 Issue ID: 9914 Summary: Add OS pagesize to the back-mdb monitor information Product: OpenLDAP Version: 2.6.3 Hardware: All OS: All Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: backends Assignee: bugs(a)openldap.org Reporter: quanah(a)openldap.org Target Milestone: --- The pagesize that back-mdb is using for pages should be exposed via the cn=monitor backend, as a remote client doing a query will not have that information available to it. -- You are receiving this mail because: You are on the CC list for the issue.

1 3

[Bug 9211] New: Relax control is not consistently access-restricted
by openldap-its＠openldap.org 25 Oct '24

25 Oct '24

https://bugs.openldap.org/show_bug.cgi?id=9211 Bug ID: 9211 Summary: Relax control is not consistently access-restricted Product: OpenLDAP Version: 2.4.49 Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: --- Component: slapd Assignee: bugs(a)openldap.org Reporter: ryan(a)openldap.org Target Milestone: --- The following operations can be performed by anyone having 'write' access (not even 'manage') using the Relax control: - modifying/replacing structural objectClass - adding/modifying OBSOLETE attributes Some operations are correctly restricted: - adding/modifying NO-USER-MODIFICATION attributes marked as manageable (Modification of non-conformant objects doesn't appear to be implemented at all.) In the absence of ACLs for controls, I'm of the opinion that all use of the Relax control should require manage access. The Relax draft clearly and repeatedly discusses its use cases in terms of directory _administrators_ temporarily relaxing constraints in order to accomplish a specific task. -- You are receiving this mail because: You are on the CC list for the bug.

1 13

[Issue 9920] New: MDB_PAGE_FULL with master3 (encryption) because there is no room for the authentication data (MAC)
by openldap-its＠openldap.org 25 Oct '24

25 Oct '24

https://bugs.openldap.org/show_bug.cgi?id=9920 Issue ID: 9920 Summary: MDB_PAGE_FULL with master3 (encryption) because there is no room for the authentication data (MAC) Product: LMDB Version: unspecified Hardware: x86_64 OS: Mac OS Status: UNCONFIRMED Keywords: needs_review Severity: normal Priority: --- Component: liblmdb Assignee: bugs(a)openldap.org Reporter: info(a)parlepeuple.fr Target Milestone: --- Created attachment 915 --> https://bugs.openldap.org/attachment.cgi?id=915&action=edit proposed patch Hello, on master3, using the encryption at rest feature, I am testing as follow: - on a new named database, i set the encryption function with mdb_env_set_encrypt(env, encfunc, &enckey, 32) - note that I chose to have a size parameter (The size of authentication data in bytes, if any. Set this to zero for unauthenticated encryption mechanisms.) of 32 bytes. - I add 2 entries on the DB, trying to saturate the first page. I chose to add a key of 33 Bytes and a value of 1977 Bytes, so the size of each node is 2010 Bytes (obviously the 2 keys are different). - This passes and the DB has just one leaf_pages, no overflow_pages, no branch_pages, an a depth of 1. - If I add one byte to the values I insert (starting again from a blank DB), then , instead of seeing 2 overflow_pages, I get an error : MDB_PAGE_FULL. - this clearly should not have happened. - Here is some tracing : add to leaf page 2 index 0, data size 48 key size 7 [74657374646200] add to leaf page 3 index 0, data size 1978 key size 33 [000000000000000000000000000000000000000000000000000000000000000000] add to branch page 5 index 0, data size 0 key size 0 [null] add to branch page 5 index 1, data size 0 key size 33 [000000000000000000000000000000000000000000000000000000000000000000] add to leaf page 4 index 0, data size 1978 key size 33 [000000000000000000000000000000000000000000000000000000000000000000] add to leaf page 4 index 1, data size 1978 key size 33 [020202020202020202020202020202020202020202020202020202020202020202] not enough room in page 4, got 1 ptrs upper-lower = 2020 - 2 = 2016 node size = 2020 Looking at the code, I understand that there is a problem at line 9005 : } else if (node_size + data->mv_size > mc->mc_txn->mt_env->me_nodemax) { where me_nodemax is incorrect, as it is not taking into account that some bytes will be needed for the MAC authentication code, which size is in env->me_esumsize. me_nodemax is calculated at line 5349: env->me_nodemax = (((env->me_psize - PAGEHDRSZ ) / MDB_MINKEYS) & -2) - sizeof(indx_t); So I substract me_esumsize with a "- env->me_esumsize" here: env->me_nodemax = (((env->me_psize - PAGEHDRSZ - env->me_esumsize) / MDB_MINKEYS) & -2) - sizeof(indx_t); I also substract it from me_maxfree_1pg in the line above, and in pmax in line 10435. I do not know if my patch is correct, but it solves the issue. Maybe there are other places in the code where the me_esumsize should be substracted from the available size. By example, when calculating the number of overflow pages in OVPAGES, it does not take into account me_esumsize, but I think it is ok, because there is only one MAC for the entire set of OV pages, and there is room for it in the first OV page. See the attached proposed patch. -- You are receiving this mail because: You are on the CC list for the issue.

1 40

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openldap-bugs April 2023