openldap-technical

openldap-technical@openldap.org

1 participants
9989 discussions

Re: olcTLSVerifyClient: demand not taking effect
by Peter Wood 13 Mar '12

13 Mar '12

On Mon, Mar 12, 2012 at 9:41 PM, Quanah Gibson-Mount <quanah(a)zimbra.com>wrote: > --On Monday, March 12, 2012 6:52 PM -0700 Peter Wood < > peterwood.sd(a)gmail.com> wrote: > > Hi, >> >> >> I setup openldap-2.4.23 server >> > > Why? I'd suggest you start with the current release, 2.4.30. You may > also want to look at <http://www.openldap.org/its/**index.cgi/?findid=7197<http://www.openldap.org/its/index.cgi/?findid=7197> > > > > That's the openldap version in centos6.2 repo. In production I try to stick with stock versions. Also I tried all variations of olcTLSVerifyClient: [demand|hard|true] with the same result. I don't think StartTLS is enabled. I'm wondering if just setting olcTLSCACertificateFile, olcTLSCertificateFile and olcTLSCertificateKeyFile is enough to get StartTLS enabled. It's very frustrating. I'd hate to go to ldaps just because I can't get StartTLS working. Is there anything else I have to set on the server to get StartTLS working? Thanks Peter

6 6

RE: OPENLDAP SYNCREPL
by Quanah Gibson-Mount 13 Mar '12

13 Mar '12

--On Tuesday, March 13, 2012 2:36 PM -0400 "Borresen, John - 0442 - MITLL" <john.borresen(a)ll.mit.edu> wrote: > Thanks, Howard; You are clearly missing the syncprov overlay on the accesslog DB, as I already stated. If you fix that, you'll get a lot further. --Quanah -- Quanah Gibson-Mount Sr. Member of Technical Staff Zimbra, Inc A Division of VMware, Inc. -------------------- Zimbra :: the leader in open source messaging and collaboration

1 0

RE: OPENLDAP SYNCREPL
by Quanah Gibson-Mount 13 Mar '12

13 Mar '12

--On Tuesday, March 13, 2012 1:12 PM -0400 "Borresen, John - 0442 - MITLL" <john.borresen(a)ll.mit.edu> wrote: > Thanks, Quanah; > > As requested: > > cn=config]# ll > total 140 > -rw------- 1 ldap ldap 398 Jan 24 11:28 cn=module{0}.ldif > -rw------- 1 ldap ldap 398 Feb 8 14:02 cn=module{1}.ldif > -rw------- 1 ldap ldap 397 Feb 21 09:06 cn=module{2}.ldif > -rw------- 1 ldap ldap 399 Feb 24 12:32 cn=module{3}.ldif You really don't need 4 separate files. ;) Use my cn=module{0}.ldif as a template for fixing yours. ;) I would also note that you're using delta-syncrepl, not syncrepl, and you failed to provide any of the configuration for the accesslog DB on the provider. My guess is that is the actual source of the error you are encountering. I.e., my guess is that you never loaded the syncprov overlay on the master's accesslog DB, which is also required. Here's an example configuration from my master's cn=accesslog configuration for the syncprov overlay there. Note that they *do* differ between your primary DB and your accesslog DB. root@zre-ldap002:/opt/zimbra/data/ldap/config/cn=config# ls olcDatabase\=\{2\}mdb olcOverlay={0}syncprov.ldif root@zre-ldap002:/opt/zimbra/data/ldap/config/cn=config# cat olcDatabase\=\{2\}mdb/olcOverlay\=\{0\}syncprov.ldif # AUTO-GENERATED FILE - DO NOT EDIT!! Use ldapmodify. # CRC32 fd177258 dn: olcOverlay={0}syncprov objectClass: olcOverlayConfig objectClass: olcSyncProvConfig olcOverlay: {0}syncprov olcSpNoPresent: TRUE olcSpReloadHint: TRUE structuralObjectClass: olcSyncProvConfig entryUUID: e97228d0-edf0-1030-98ed-dbd1519e60e2 creatorsName: cn=config createTimestamp: 20120217202252Z entryCSN: 20120217202252.161808Z#000000#000#000000 modifiersName: cn=config modifyTimestamp: 20120217202252Z --Quanah -- Quanah Gibson-Mount Sr. Member of Technical Staff Zimbra, Inc A Division of VMware, Inc. -------------------- Zimbra :: the leader in open source messaging and collaboration

1 0

Re-binding to a failed connection segfaults
by Jan Synacek 13 Mar '12

13 Mar '12

Hi list, I've created a small reproducer, that calls ldap_sasl_interactive_bind_s after it has been called once and failed, which causes a segfault. I've traced this bug with gdb: $ gdb ./reproducer GNU gdb (GDB) Fedora (7.3.50.20110722-10.fc16) Copyright (C) 2011 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /home/jsynacek/work/bz784989-openldap-rebinding/reproducer...done. (gdb) r Starting program: /home/jsynacek/work/bz784989-openldap-rebinding/reproducer [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". ldap_sasl_interactive_bind: user selected: GSSAPI ldap_int_sasl_bind: GSSAPI ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP localhost:636 ldap_new_socket: 7 ldap_prepare_socket: 7 ldap_connect_to_host: Trying ::1 636 ldap_pvt_connect: fd: 7 tm: -1 async: 0 TLS: error: tlsm_PR_Recv returned 0 - error 21:Is a directory TLS: error: connect - force handshake failure: errno 21 - moznss error -5938 TLS: can't connect: TLS error -5938:Encountered end of file. ldap_msgfree ldap_err2string bind failed: Can't contact LDAP server, retrying for fun and profit! ldap_sasl_interactive_bind: user selected: GSSAPI ldap_int_sasl_bind: GSSAPI Program received signal SIGSEGV, Segmentation fault. ldap_int_sasl_bind (ld=0x603130, dn=0x0, mechs=0x401a30 "GSSAPI", sctrls=0x0, cctrls=0x0, flags=1, interact=0x401660 <lutil_sasl_interact>, defaults=0x60cae0, result=0x0, rmech=0x7fffffffd878, msgid=0x7fffffffd88c) at ../../../libraries/libldap/cyrus.c:444 444 oldctx = ld->ld_defconn->lconn_sasl_authctx; (gdb) p ld->ldc->ldc_defconn $1 = (LDAPConn *) 0x0 If you set slapd to use TLS certs (uncomment the 'TLS*' lines in the config), there is no segfault. Reproducer and cn=config.ldif attached. Original bugreport: https://bugzilla.redhat.com/show_bug.cgi?id=784989 Regards, -- Jan Synacek BaseOS team Brno

2 1

olcTLSVerifyClient: demand not taking effect
by Peter Wood 12 Mar '12

12 Mar '12

Hi, I setup openldap-2.4.23 server on centos6.2 using cn=config. The server itself doesn't authenticate through ldap. Network clients are able to authenticate but the network traffic is unencrypted. Next step is to configure SSL/TLS. I was reading multiple sources of documentation, trying to understand what I'm doing not just follow instructions. I created a CA, generated certificate for the server and setup these in cn=config: olcTLSCACertificateFile: /etc/openldap/cacerts/CA.crt olcTLSCertificateFile: /etc/pki/tls/certs/ldapserver.crt olcTLSCertificateKeyFile: /etc/pki/tls/private/ldapserver-nopass.key olcTLSVerifyClient: demand I was expecting that after slapd restart clients will not being able to authenticate but they still can and the traffic is still unencrypted. On the server if I run tcpdump I can clearly see usernames and passwords. Service slapd is running as user ldap and I made sure the user has read access to all cert files and private keys. I enabled logging level "olcLogLevel: stats" but I don't see any errors in the log file. Shouldn't "olcTLSVerifyClient: demand" drop the connection if the client doesn't provide valid certificate? Thank you for any pointers. -- Peter

2 1

Dynamic to Static LDAP
by Gaurav Gugnani 12 Mar '12

12 Mar '12

Hello All, We are using openldap 2.4 in our systems with berkley DB as a backend. Now, in current scenario we are using static LDAP i.e. /etc/openldap/slapd.conf and whenever we want to change any configuration parameter then we need to re-start LDAP. So, we decided to switch to dynamic LDAP i.e. using cn=config. So, *my Q's is:* I made my system running on dynamic LDAP like from past 2 months and in this span of time i implemented several changes. Now, suppose today i plan to again move back to use static configuration - Will i able to save all my changes what i did in all this time? OR All changes made are lost? If Lost - Is there any way to retrieve the changes which i made? Please suggest. Thanks and Regards, Gaurav Gugnani

4 5

How to Modify OpenLDAP Entry for Replication
by Scott McLane Gardner 12 Mar '12

12 Mar '12

OpenLDAP newbie here, hopefully this is the right list to send this sort of thing to. I have successfully set up two OpenLDAP servers one as the master and the other replicating the masters database using the instructions in the ubuntu documentation, here: https://help.ubuntu.com/11.10/serverguide/C/openldap-server.html#openldap-s erver-replication What I'd like to do now is change the admin password on the master, but that will break the replication. How can I change the consumer configuration (further down the page linked above) to update it with the new password? I'm sure that using ldapmodify is probably what I want, I just don't know enough to do it correctly.

1 0

Large delay before transmitting search result
by Rene B. Elgaard 12 Mar '12

12 Mar '12

Hello, OpenLDAP 2.4.26 + BerkeleyDB 5.2.28, also seen on OpenLDAP 2.4.22 + BerkeleyDB 4.6.21 I am trying to investigate a response time issue. Basically I am doing a search with ldapsearch that results in the transfer of an 8.5 Mb binary entry. This takes around 800 ms measured on the server itself from the request has been received until the response has been delivered.. Looking at what is going on on the network I see a large delay between slapd receiving the search request and the actual start of the transfer. This delay accounts for around 600ms. So what is going on during this time ? I am on Solaris 10, so I use dtrace to look at slapd, and it turns out that it calls memmove(<ADDR>,<ADDR> + 1, ~8.5 Mb). That is it shifts the result 1 byte, and it does this 4 times. Each memmove takes around 150 ms, which accounts almost completely for the delay before doing the transfer over network. I have written a small C program which does the same memmove and verified that on my setup, it does indeed take 150ms to shift 8.5 Mb 1 byte. The stacktrace up until each memmove is 0 42451 memmove:entry *** Moving from 213650401 to 213650402 *** libc.so.1`memmove slapd`0x82461c9 slapd`ber_printf+0x4ff slapd`slap_send_search_entry+0x1a94 slapd`bdb_search+0x1ce0 slapd`fe_op_search+0x574 slapd`do_search+0xc82 slapd`0x80927a9 slapd`0x8092d21 slapd`0x8210034 The first line shows the source and destination address for memmove. The numbers themselves are not interesting, but the difference (1) is. Why is it shifting the buffer 1 byte ? If this could be optimized somehow, it could lead to a huge improvement in response time. Thanks, Rene

4 3

Re: slow or inconsistent syncrepl
by Amol Kulkarni 11 Mar '12

11 Mar '12

I see that I'm outdated in my tuning as per http://wiki.zimbra.com/wiki/OpenLDAP_Performance_Tuning. I'll do these changes and observe the servers. In the mean time a new observation regarding syncrepl is that if I do ldapmodify for 5 - 10 entries in one go the changes get replicated but if I change about 300 entries in one go, then some entries do not get replicated on some servers. These changes dont get replicated until I change those entries again. Does this indicate provider resource problem or consumer resource problem ( or normal behaviour ) ? ----- Original Message ----- From: Quanah Gibson-Mount Sent: 03/11/12 02:05 AM To: Amol Kulkarni, Howard Chu Subject: Re: slow or inconsistent syncrepl --On Saturday, March 10, 2012 2:34 PM +0100 Amol Kulkarni <amolkulkarni(a)gmx.com> wrote: > > >>> That depends entirely on the speed of your server and network. > > Taking the server part first - I'm also doubt that my provider server is > underpowered. > > Following are the ldap specific parameters on our provider server : > > entries : 0.5 million > avg entry size : 1k to 4k > cachesize : 0.5 million > dncachesize : 0.5 million > database type : bdb > bdb cachesize : 3 gb > ldap threads : 16 > > Foll is hardware configuration of the provider server : > ram : 8gb > swap : 8gb > cpu : Virtual machine with 4 cpus. (vmware vsphere) > architecture : 64 bit > > Also we have some administrative services/tasks running on the provider > server other than openldap. But the sar output seems normal i.e iowait > below 10 and idle time above 50. > > Does the hardware configuration seem ok for the given ldap size and > configuration ? > > If not, can u suggest some changes? You don't provide any useful information for suggesting changes. I would advise you read over <http://wiki.zimbra.com/wiki/OpenLDAP_Performance_Tuning> -- Quanah Gibson-Mount Sr. Member of Technical Staff Zimbra, Inc A Division of VMware, Inc. -------------------- Zimbra :: the leader in open source messaging and collaboration

2 1

Re: slow or inconsistent syncrepl
by Amol Kulkarni 10 Mar '12

10 Mar '12

>>That depends entirely on the speed of your server and network. Taking the server part first - I'm also doubt that my provider server is underpowered. Following are the ldap specific parameters on our provider server : entries : 0.5 million avg entry size : 1k to 4k cachesize : 0.5 million dncachesize : 0.5 million database type : bdb bdb cachesize : 3 gb ldap threads : 16 Foll is hardware configuration of the provider server : ram : 8gb swap : 8gb cpu : Virtual machine with 4 cpus. (vmware vsphere) architecture : 64 bit Also we have some administrative services/tasks running on the provider server other than openldap. But the sar output seems normal i.e iowait below 10 and idle time above 50. Does the hardware configuration seem ok for the given ldap size and configuration ? If not, can u suggest some changes? Thanks and Regards, Amol Kulkarni. ----- Original Message ----- From: Howard Chu Sent: 03/10/12 01:29 PM To: Amol Kulkarni Subject: Re: slow or inconsistent syncrepl Amol Kulkarni wrote: > Dear Quanah, > > Thanks a lot for these 2 pointers. I'll check out the 2.4.30 version. > We had used delta syncrepl earlier but our accesslog size used to grow > suddenly sometimes and the disk used to get full crashing/hanging the ldap > service itself on the provider. But at that time we had kept the max age for > the accesslog to be 7 days. I'll reduce it and give it a try again. > > Also it would be helpful if you can throw some light on : > > 2. On a really busy ldap server, can replication slow down drastically? i.e > does the read operations affect the replication in any way? Syncrepl executes as an LDAP Search operation, so of course it competes for server resources with other Search activity on the server. > 4. We are currently having about 60 consumers - is this too much ? What can be > the max numbers of consumers ? That depends entirely on the speed of your server and network. If you're seeing that replication speed is inconsistent, you probably should reduce the load on the provider. A simple approach in your scenario would be to just point the 10 consumers on the fast LAN at the provider, and configure these consumers to act as providers for your WAN nodes (i.e., cascaded replication). > 5. Sometimes we urgently need some particular node to be present on the > consumer - for which we cannot wait - in that case we get ldif of that node > from provider and do ldapadd on the consumer ( mirrormode is ON on the > consumers ). Is this safe and correct or could it cause some side effects ? Is > there a better way to handle it? If you have configured distinct serverIDs for each consumer, this might work. Otherwise, no, not safe, not correct. Fix your configuration layout, or fix your apps. If your apps can't wait then they are mis-designed; there is no such thing as instantaneous propagation of information in the real world. > Thanks and Regards, > Amol Kulkarni. > >> ----- Original Message ----- >> >> From: Quanah Gibson-Mount >> >> Sent: 03/09/12 11:57 PM >> >> To: Amol Kulkarni, openldap-technical(a)openldap.org >> >> Subject: Re: slow or inconsistent syncrepl >> >> >> >> --On Friday, March 09, 2012 2:20 PM +0100 Amol Kulkarni >> <amolkulkarni(a)gmx.com> wrote: >> >> > I have a following openldap setup with syncrepl : >> > - openldap version 2.4.23 >> >> This is your #1 issue. >> >> > - 1 provider and about 10 consumers in lan and 50 consumers on wan >> >> This is your #2 issue. >> >> Upgrade to a stable release. Use delta-syncrepl, which uses significantly >> less bandwidth than syncrepl. >> >> --Quanah >> >> -- >> >> Quanah Gibson-Mount >> Sr. Member of Technical Staff >> Zimbra, Inc >> A Division of VMware, Inc. >> -------------------- >> Zimbra :: the leader in open source messaging and collaboration -- -- Howard Chu CTO, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

openldap-technical