openldap-technical October 2024

openldap-technical@openldap.org

16 participants
15 discussions

Multiple memberOf overlays
by John C. Pfeifer 05 Aug '25

05 Aug '25

I am in the process of converting an existing LDAP infrastructure to OpenLDAP. I have a case where it would be convenient for two different objectClasses to map into the memberOf attribute. Is it possible to define two overlay configs or will they end up fighting each other over the memberOf attribute? For instance: dn: olcOverlay={5}memberofA,olcDatabase={2}mdb,cn=config objectClass: olcOverlayConfig objectClass: olcMemberOf olcOverlay: {5}memberofA olcMemberOfDangling: error olcMemberOfRefInt: FALSE olcMemberOfGroupOC: objectClassA olcMemberOfMemberAD: member olcMemberOfMemberOfAD: memberOf dn: olcOverlay={6}memberofB,olcDatabase={2}mdb,cn=config objectClass: olcOverlayConfig objectClass: olcMemberOf olcOverlay: {6}memberofB olcMemberOfDangling: error olcMemberOfRefInt: FALSE olcMemberOfGroupOC: objectClassB olcMemberOfMemberAD: member olcMemberOfMemberOfAD: memberOf // John Pfeifer Division of Information Technology University of Maryland, College Park

4 3

olcPPolicyForwardUpdates not working
by Benjamin Renard 18 Jun '25

18 Jun '25

Hello, I have problem with the olcPPolicyForwardUpdates option that seem not working : On master and slave, I configured Ppolicy with pwdLockout. When I try to connect on master with a bad password, the pwdFailureTime attribute of the entry is successfully updated, but not if I do the same on the slave. On slave, my ppolicy configuration is exactly the same as on master but I add olcPPolicyForwardUpdates=TRUE. I also configured the chain overlay and the updateref parameter on the database. Extract of my slave configuration : olcDatabase={1}mdb,cn=config [...] olcSyncrepl: [...] olcUpdateRef: ldaps://ldap-master olcOverlay={0}chain,olcDatabase={1}mdb,cn=config objectClass: olcOverlayConfig objectClass: olcChainConfig objectClass: top olcOverlay: {0}chain olcChainReturnError: TRUE olcDatabase={0}ldap,olcOverlay={0}chain,olcDatabase={1}mdb,cn=config objectClass: olcLDAPConfig objectClass: olcChainDatabase objectClass: top olcDatabase: {0}ldap olcDbURI: ldaps://ldap-master olcDbIDAssertBind: bindmethod=simple binddn="[same user used in olcSyncrepl of the database]" credentials="secret" mode=self olcDbRebindAsUser: TRUE olcOverlay={1}ppolicy,olcDatabase={1}mdb,cn=config objectClass: olcOverlayConfig objectClass: olcPPolicyConfig objectClass: top olcOverlay: {1}ppolicy olcPPolicyHashCleartext: TRUE olcPPolicyUseLockout: TRUE olcPPolicyForwardUpdates: TRUE Do you have any idea of what I doing wrong ? Thanks, -- Benjamin Renard - Easter-eggs 44-46 rue de l'Ouest - 75014 Paris - France - Métro Gaité Phone: +33 (0) 1 43 35 00 37 - mailto:brenard@easter-eggs.com

3 20

openldap TLSv1.0 is enabled
by Andre Rodier 16 May '25

16 May '25

Hello, I have configured OpenLDAP using SSL certificate, but I have a few issues. Here the TLS configuration, especially "olcTLSProtocolMin: 3.3" > # AUTO-GENERATED FILE - DO NOT EDIT!! Use ldapmodify. > # CRC32 c70363a6 > dn: cn=config > objectClass: olcGlobal > cn: config > olcArgsFile: /var/run/slapd/slapd.args > olcLogLevel: none > olcPidFile: /var/run/slapd/slapd.pid > olcToolThreads: 1 > structuralObjectClass: olcGlobal > entryUUID: 40ee991a-0efe-103d-855a-11ff3a5638b4 > creatorsName: cn=config > createTimestamp: 20221213065102Z > olcPasswordCryptSaltFormat: $6$%.16s > olcTLSCACertificateFile: /etc/ldap/certs/ldap.homebox.world.issuer.crt > olcTLSCertificateKeyFile: /etc/ldap/certs/ldap.homebox.world.key > olcTLSCertificateFile: /etc/ldap/certs/ldap.homebox.world.crt > olcTLSProtocolMin: 3.3 > entryCSN: 20221214054517.926245Z#000000#000#000000 > modifiersName: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth > modifyTimestamp: 20221214054517Z But if I try sslscan: I see TLSv1.0, TLSv1.1 and TLSv1.2 enabled. Why ? > root@main:/etc/ldap/changes# sslscan ldap.homebox.world:636 > Version: 2.0.7 > OpenSSL 1.1.1n 15 Mar 2022 > > Connected to 2001:19f0:7402:86e:5400:4ff:fe38:b9b4 > > Testing SSL server ldap.homebox.world on port 636 using SNI name ldap.homebox.world > > SSL/TLS Protocols: > SSLv2 disabled > SSLv3 disabled > TLSv1.0 enabled > TLSv1.1 enabled > TLSv1.2 enabled > TLSv1.3 enabled > > TLS Fallback SCSV: > Server supports TLS Fallback SCSV > > TLS renegotiation: > Secure session renegotiation supported > > TLS Compression: > OpenSSL version does not support compression > Rebuild with zlib1g-dev package for zlib support > > Heartbleed: > TLSv1.3 not vulnerable to heartbleed > TLSv1.2 not vulnerable to heartbleed > TLSv1.1 not vulnerable to heartbleed > TLSv1.0 not vulnerable to heartbleed > > Supported Server Cipher(s): > Preferred TLSv1.3 128 bits TLS_AES_128_GCM_SHA256 Curve 25519 DHE 253 > Accepted TLSv1.3 256 bits TLS_AES_256_GCM_SHA384 Curve 25519 DHE 253 > Accepted TLSv1.3 256 bits TLS_CHACHA20_POLY1305_SHA256 Curve 25519 DHE 253 > Accepted TLSv1.3 128 bits TLS_AES_128_CCM_SHA256 Curve 25519 DHE 253 > Preferred TLSv1.2 256 bits ECDHE-RSA-AES256-GCM-SHA384 Curve 25519 DHE 253 > Accepted TLSv1.2 256 bits ECDHE-RSA-CHACHA20-POLY1305 Curve 25519 DHE 253 > Accepted TLSv1.2 128 bits ECDHE-RSA-AES128-GCM-SHA256 Curve 25519 DHE 253 > Accepted TLSv1.2 256 bits ECDHE-RSA-AES256-SHA Curve 25519 DHE 253 > Accepted TLSv1.2 128 bits ECDHE-RSA-AES128-SHA Curve 25519 DHE 253 > Accepted TLSv1.2 256 bits AES256-GCM-SHA384 > Accepted TLSv1.2 256 bits AES256-CCM > Accepted TLSv1.2 128 bits AES128-GCM-SHA256 > Accepted TLSv1.2 128 bits AES128-CCM > Accepted TLSv1.2 256 bits AES256-SHA > Accepted TLSv1.2 128 bits AES128-SHA > Preferred TLSv1.1 256 bits ECDHE-RSA-AES256-SHA Curve 25519 DHE 253 > Accepted TLSv1.1 128 bits ECDHE-RSA-AES128-SHA Curve 25519 DHE 253 > Accepted TLSv1.1 256 bits AES256-SHA > Accepted TLSv1.1 128 bits AES128-SHA > Preferred TLSv1.0 256 bits ECDHE-RSA-AES256-SHA Curve 25519 DHE 253 > Accepted TLSv1.0 128 bits ECDHE-RSA-AES128-SHA Curve 25519 DHE 253 > Accepted TLSv1.0 256 bits AES256-SHA > Accepted TLSv1.0 128 bits AES128-SHA > > Server Key Exchange Group(s): > TLSv1.3 128 bits secp256r1 (NIST P-256) > TLSv1.3 192 bits secp384r1 (NIST P-384) > TLSv1.3 260 bits secp521r1 (NIST P-521) > TLSv1.3 128 bits x25519 > TLSv1.3 224 bits x448 > TLSv1.3 112 bits ffdhe2048 > TLSv1.3 128 bits ffdhe3072 > TLSv1.3 150 bits ffdhe4096 > TLSv1.3 175 bits ffdhe6144 > TLSv1.3 192 bits ffdhe8192 > TLSv1.2 128 bits secp256r1 (NIST P-256) > TLSv1.2 192 bits secp384r1 (NIST P-384) > TLSv1.2 260 bits secp521r1 (NIST P-521) > TLSv1.2 128 bits x25519 > TLSv1.2 224 bits x448 > > SSL Certificate: > Signature Algorithm: sha256WithRSAEncryption > RSA Key Strength: 2048 > > Subject: ldap.homebox.world > Altnames: DNS:ldap.homebox.world > Issuer: (STAGING) Artificial Apricot R3 > > Not valid before: Dec 13 05:34:29 2022 GMT > Not valid after: Mar 13 05:34:28 2023 GMT Thanks for your insights. Andre

6 13

Replication Issue with OpenLDAP 2.6.3
by mridumit＠amdocs.com 18 Dec '24

18 Dec '24

Hi I am very new to OpenLDAP, and we have a multi master configuration with us and our replication is not working. The error we get in log file is mainly : slap_client_connect: URI=<provider url> DN="cn=<sample value>,dc=<sample value>,dc=<sample value>" ldap_sasl_bind_s failed (-1). Attaching below logs after starting slapd service , Could you please help us ? Oct 16 14:15:47 <our ldap host> slapd[853101]: @(#) $OpenLDAP: slapd 2.6.3 (Nov 15 2023 00:00:00) $#012#011openldap Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 11 (TLSProtocolMin 3.3) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 12 (TLSCertificateFile <path to crt file>) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 13 (TLSCertificateKeyFile <path to key file file>) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 14 (TLSCipherSuite ECDHE-RSA-AES256-SHA) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 17 (disallow bind_anon) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 19 (require bind) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 21 (security simple_bind=128) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 23 (serverID 001) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 23: SID=0x001 Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 25 (moduleload syncprov) Oct 16 14:15:47 <our ldap host> slapd[853101]: loaded module syncprov Oct 16 14:15:47 <our ldap host> slapd[853101]: module syncprov: null module registered Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 28 (database config) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 29 (rootdn cn=admin,cn=config) Oct 16 14:15:47 <our ldap host> slapd[853101]: >>> dnPrettyNormal: <cn=admin,cn=config> Oct 16 14:15:47 <our ldap host> slapd[853101]: <<< dnPrettyNormal: <cn=admin,cn=config>, <cn=admin,cn=config> Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 30 (rootpw ***) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 33 (database monitor) Oct 16 14:15:47 <our ldap host> slapd[853101]: >>> dnPrettyNormal: <cn=Monitor> Oct 16 14:15:47 <our ldap host> slapd[853101]: <<< dnPrettyNormal: <cn=Monitor>, <cn=monitor> Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 36 (database mdb) Oct 16 14:15:47 <our ldap host> slapd[853101]: mdb_db_init: Initializing mdb database Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 37 (suffix dc=<sample value>,dc=com) Oct 16 14:15:47 <our ldap host> slapd[853101]: >>> dnPrettyNormal: <dc=<sample value>,dc=com> Oct 16 14:15:47 <our ldap host> slapd[853101]: <<< dnPrettyNormal: <dc=<sample value>,dc=com>, <dc=<sample value>,dc=com> Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 38 (rootdn cn=Manager,dc=<sample value>,dc=com) Oct 16 14:15:47 <our ldap host> slapd[853101]: >>> dnPrettyNormal: <cn=Manager,dc=<sample value>,dc=com> Oct 16 14:15:47 <our ldap host> slapd[853101]: <<< dnPrettyNormal: <cn=Manager,dc=<sample value>,dc=com>, <cn=manager,dc=<sample value>,dc=com> Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 39 (rootpw ***) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 40 (directory /home/ldap) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 49 (syncrepl ***) Oct 16 14:15:47 <our ldap host> slapd[853101]: >>> dnNormalize: <cn=<sample value>,dc=<sample value>,dc=com> Oct 16 14:15:47 <our ldap host> slapd[853101]: <<< dnNormalize: <cn=<sample value>,dc=<sample value>,dc=com> Oct 16 14:15:47 <our ldap host> slapd[853101]: >>> dnNormalize: <dc=<sample value>,dc=com> Oct 16 14:15:47 <our ldap host> slapd[853101]: <<< dnNormalize: <dc=<sample value>,dc=com> Oct 16 14:15:47 <our ldap host> slapd[853101]: str2filter "(objectclass=*)" Oct 16 14:15:47 <our ldap host> slapd[853101]: begin get_filter Oct 16 14:15:47 <our ldap host> slapd[853101]: PRESENT Oct 16 14:15:47 <our ldap host> slapd[853101]: end get_filter 0 Oct 16 14:15:47 <our ldap host> slapd[853101]: Config: ** successfully added syncrepl rid=001 "<provider url>" Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 51 (mirrormode TRUE) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 52 (multiprovider on) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 55 (index entryCSN eq) Oct 16 14:15:47 <our ldap host> slapd[853101]: index entryCSN 0x0004 Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 56 (index entryUUID eq ) Oct 16 14:15:47 <our ldap host> slapd[853101]: index entryUUID 0x0004 Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 58 (index objectClass eq) Oct 16 14:15:47 <our ldap host> slapd[853101]: index objectClass 0x0004 Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 59 (index ps eq) Oct 16 14:15:47 <our ldap host> slapd[853101]: index ps 0x0004 Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 60 (index <sample value>-safe-id eq) Oct 16 14:15:47 <our ldap host> slapd[853101]: index <sample value>--id 0x0004 Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 61 (checkpoint 128 15) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 64 (overlay syncprov) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 66 (syncprov-checkpoint 100 10) Oct 16 14:15:47 <our ldap host> slapd[853101]: /etc/openldap/slapd.conf: line 72 (limits dn.exact=cn=<sample value>,dc=<sample value>,dc=com size=unlimited time=unlimited) Oct 16 14:15:47 <our ldap host> slapd[853101]: >>> dnNormalize: <cn=<sample value>,dc=<sample value>,dc=com> Oct 16 14:15:47 <our ldap host> slapd[853101]: <<< dnNormalize: <cn=<sample value>,dc=<sample value>,dc=com> Oct 16 14:15:47 <our ldap host> slapd[853101]: >>> dnNormalize: <cn=Subschema> Oct 16 14:15:47 <our ldap host> slapd[853101]: <<< dnNormalize: <cn=subschema> Oct 16 14:15:47 <our ldap host> slapd[853103]: slapd startup: initiated. Oct 16 14:15:47 <our ldap host> slapd[853103]: backend_startup_one: starting "cn=config" Oct 16 14:15:47 <our ldap host> slapd[853103]: config_back_db_open Oct 16 14:15:47 <our ldap host> slapd[853103]: config_back_db_open: line 0: warning: cannot assess the validity of the ACL scope within backend naming context Oct 16 14:15:47 <our ldap host> slapd[853103]: config_back_db_open: No explicit ACL for back-config configured. Using hardcoded default Oct 16 14:15:47 <our ldap host> slapd[853103]: config_build_entry: "cn=config" Oct 16 14:15:47 <our ldap host> slapd[853103]: slap_get_csn: conn=-1 op=0 generated new csn=20241016084547.895827Z#000000#001#000000 manage=0 Oct 16 14:15:47 <our ldap host> slapd[853103]: config_build_entry: "cn=module{0}" Oct 16 14:15:47 <our ldap host> slapd[853103]: slap_get_csn: conn=-1 op=0 generated new csn=20241016084547.896054Z#000000#001#000000 manage=0 Oct 16 14:15:47 <our ldap host> slapd[853103]: config_build_entry: "cn=schema" Oct 16 14:15:47 <our ldap host> slapd[853103]: slap_get_csn: conn=-1 op=0 generated new csn=20241016084547.897011Z#000000#001#000000 manage=0 Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn={0}core> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn={0}core> Oct 16 14:15:47 <our ldap host> slapd[853103]: config_build_entry: "cn={0}core" Oct 16 14:15:47 <our ldap host> slapd[853103]: slap_get_csn: conn=-1 op=0 generated new csn=20241016084547.899435Z#000000#001#000000 manage=0 Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn={1}> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn={1}> Oct 16 14:15:47 <our ldap host> slapd[853103]: config_build_entry: "cn={1}" Oct 16 14:15:47 <our ldap host> slapd[853103]: slap_get_csn: conn=-1 op=0 generated new csn=20241016084547.903375Z#000000#001#000000 manage=0 Oct 16 14:15:47 <our ldap host> slapd[853103]: config_build_entry: "olcDatabase={-1}frontend" Oct 16 14:15:47 <our ldap host> slapd[853103]: slap_get_csn: conn=-1 op=0 generated new csn=20241016084547.903549Z#000000#001#000000 manage=0 Oct 16 14:15:47 <our ldap host> slapd[853103]: config_build_entry: "olcDatabase={0}config" Oct 16 14:15:47 <our ldap host> slapd[853103]: slap_get_csn: conn=-1 op=0 generated new csn=20241016084547.903679Z#000000#001#000000 manage=0 Oct 16 14:15:47 <our ldap host> slapd[853103]: config_build_entry: "olcDatabase={1}monitor" Oct 16 14:15:47 <our ldap host> slapd[853103]: slap_get_csn: conn=-1 op=0 generated new csn=20241016084547.903828Z#000000#001#000000 manage=0 Oct 16 14:15:47 <our ldap host> slapd[853103]: config_build_entry: "olcDatabase={2}mdb" Oct 16 14:15:47 <our ldap host> slapd[853103]: slap_get_csn: conn=-1 op=0 generated new csn=20241016084547.904066Z#000000#001#000000 manage=0 Oct 16 14:15:47 <our ldap host> slapd[853103]: config_build_entry: "olcOverlay={0}syncprov" Oct 16 14:15:47 <our ldap host> slapd[853103]: slap_get_csn: conn=-1 op=0 generated new csn=20241016084547.904212Z#000000#001#000000 manage=0 Oct 16 14:15:47 <our ldap host> slapd[853103]: backend_startup_one: starting "cn=Monitor" Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnPretty: <cn=Backends> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnPretty: <cn=Backends> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Backends> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=backends> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnPretty: <cn=Connections> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnPretty: <cn=Connections> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Connections> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=connections> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnPretty: <cn=Databases> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnPretty: <cn=Databases> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Databases> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=databases> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnPretty: <cn=Listeners> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnPretty: <cn=Listeners> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Listeners> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=listeners> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnPretty: <cn=Log> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnPretty: <cn=Log> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Log> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=log> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnPretty: <cn=Operations> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnPretty: <cn=Operations> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Operations> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=operations> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnPretty: <cn=Overlays> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnPretty: <cn=Overlays> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Overlays> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=overlays> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnPretty: <cn=SASL> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnPretty: <cn=SASL> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=SASL> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=sasl> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnPretty: <cn=Statistics> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnPretty: <cn=Statistics> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Statistics> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=statistics> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnPretty: <cn=Threads> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnPretty: <cn=Threads> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Threads> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=threads> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnPretty: <cn=Time> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnPretty: <cn=Time> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Time> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=time> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnPretty: <cn=TLS> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnPretty: <cn=TLS> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=TLS> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=tls> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnPretty: <cn=Waiters> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnPretty: <cn=Waiters> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Waiters> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=waiters> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Backend 0> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=backend 0> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Database 0,cn=Databases,cn=Monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=database 0,cn=databases,cn=monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Backend 1> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=backend 1> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Backend 2> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=backend 2> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Database 1,cn=Databases,cn=Monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=database 1,cn=databases,cn=monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Backend 3> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=backend 3> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Backend 4> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=backend 4> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Max File Descriptors> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=max file descriptors> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Total> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=total> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Current> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=current> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Frontend> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=frontend> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Database 0> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=database 0> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Backend 0,cn=Backends,cn=Monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=backend 0,cn=backends,cn=monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Database 1> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=database 1> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Backend 2,cn=Backends,cn=Monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=backend 2,cn=backends,cn=monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Database 2> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=database 2> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Overlay 1,cn=Overlays,cn=Monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=overlay 1,cn=overlays,cn=monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Backend 3,cn=Backends,cn=Monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=backend 3,cn=backends,cn=monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Overlay 0> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=overlay 0> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Overlay 1,cn=Overlays,cn=Monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=overlay 1,cn=overlays,cn=monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Listener 0> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=listener 0> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Listener 1> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=listener 1> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Listener 2> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=listener 2> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Listener 3> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=listener 3> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Listener 4> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=listener 4> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Bind> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=bind> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Unbind> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=unbind> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Search> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=search> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Compare> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=compare> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Modify> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=modify> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Modrdn> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=modrdn> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Add> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=add> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Delete> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=delete> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Abandon> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=abandon> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Extended> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=extended> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Overlay 0> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=overlay 0> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Overlay 1> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=overlay 1> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Database 2,cn=Databases,cn=Monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=database 2,cn=databases,cn=monitor> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Overlay 2> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=overlay 2> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Bytes> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=bytes> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=PDU> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=pdu> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Entries> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=entries> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Referrals> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=referrals> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Max> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=max> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Max Pending> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=max pending> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Open> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=open> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Starting> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=starting> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Active> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=active> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Pending> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=pending> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Backload> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=backload> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=State> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=state> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Runqueue> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=runqueue> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Tasklist> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=tasklist> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Start> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=start> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Current> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=current> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Uptime> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=uptime> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Read> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=read> Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Write> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=write> Oct 16 14:15:47 <our ldap host> slapd[853103]: backend_startup_one: starting "dc=<sample value>,dc=com" Oct 16 14:15:47 <our ldap host> slapd[853103]: mdb_db_open: "dc=<sample value>,dc=com" Oct 16 14:15:47 <our ldap host> slapd[853103]: mdb_db_open: database "dc=<sample value>,dc=com": dbenv_open(/home/ldap). Oct 16 14:15:47 <our ldap host> slapd[853103]: syncprov_db_open: starting syncprov for suffix dc=<sample value>,dc=com Oct 16 14:15:47 <our ldap host> slapd[853103]: => mdb_entry_get: ndn: "dc=<sample value>,dc=com" Oct 16 14:15:47 <our ldap host> slapd[853103]: => mdb_entry_get: oc: "(null)", at: "contextCSN" Oct 16 14:15:47 <our ldap host> slapd[853103]: mdb_dn2entry("dc=<sample value>,dc=com") Oct 16 14:15:47 <our ldap host> slapd[853103]: => mdb_dn2id("dc=<sample value>,dc=com") Oct 16 14:15:47 <our ldap host> slapd[853103]: <= mdb_dn2id: got id=0x1 Oct 16 14:15:47 <our ldap host> slapd[853103]: => mdb_entry_decode: Oct 16 14:15:47 <our ldap host> slapd[853103]: <= mdb_entry_decode Oct 16 14:15:47 <our ldap host> slapd[853103]: => mdb_entry_get: found entry: "dc=<sample value>,dc=com" Oct 16 14:15:47 <our ldap host> slapd[853103]: mdb_entry_get: rc=0 Oct 16 14:15:47 <our ldap host> slapd[853103]: slapd starting Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: added 4r listener=(nil) Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: added 7r listener=0x5612300dd830 Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: added 8r listener=0x5612300dd920 Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: added 9r listener=0x5612300ddad0 Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: added 10r listener=0x5612300ddbc0 Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: added 11r listener=0x5612300ddd10 Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: epoll: listen=7 active_threads=0 tvp=zero Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: epoll: listen=8 active_threads=0 tvp=zero Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: epoll: listen=9 active_threads=0 tvp=zero Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: epoll: listen=10 active_threads=0 tvp=zero Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: epoll: listen=11 active_threads=0 tvp=zero Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: activity on 1 descriptor Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: activity on: Oct 16 14:15:47 <our ldap host> slapd[853103]: Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: epoll: listen=7 active_threads=0 tvp=zero Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: epoll: listen=8 active_threads=0 tvp=zero Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: epoll: listen=9 active_threads=0 tvp=zero Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: epoll: listen=10 active_threads=0 tvp=zero Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: epoll: listen=11 active_threads=0 tvp=zero Oct 16 14:15:47 <our ldap host> slapd[853103]: >>> dnNormalize: <cn=Consumer 001> Oct 16 14:15:47 <our ldap host> slapd[853103]: <<< dnNormalize: <cn=consumer 001> Oct 16 14:15:47 <our ldap host> slapd[853103]: =>do_syncrepl rid=001 Oct 16 14:15:47 <our ldap host> slapd[853103]: slap_client_connect: URI=<provider url> DN="cn=<sample value>,dc=<sample value>,dc=com" ldap_sasl_bind_s failed (-1) Oct 16 14:15:47 <our ldap host> slapd[853103]: do_syncrepl: rid=001 rc -1 retrying (4 retries left) Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: activity on 1 descriptor Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: activity on: Oct 16 14:15:47 <our ldap host> slapd[853103]: Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: epoll: listen=7 active_threads=0 tvp=zero Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: epoll: listen=8 active_threads=0 tvp=zero Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: epoll: listen=9 active_threads=0 tvp=zero Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: epoll: listen=10 active_threads=0 tvp=zero Oct 16 14:15:47 <our ldap host> slapd[853103]: daemon: epoll: listen=11 active_threads=0 tvp=zero Oct 16 14:15:52 <our ldap host> slapd[853103]: daemon: epoll: listen=7 active_threads=0 tvp=zero Oct 16 14:15:52 <our ldap host> slapd[853103]: daemon: epoll: listen=8 active_threads=0 tvp=zero Oct 16 14:15:52 <our ldap host> slapd[853103]: daemon: epoll: listen=9 active_threads=0 tvp=zero Oct 16 14:15:52 <our ldap host> slapd[853103]: daemon: epoll: listen=10 active_threads=0 tvp=zero Oct 16 14:15:52 <our ldap host> slapd[853103]: daemon: epoll: listen=11 active_threads=0 tvp=zero Oct 16 14:15:52 <our ldap host> slapd[853103]: =>do_syncrepl rid=001 Oct 16 14:15:52 <our ldap host> slapd[853103]: slap_client_connect: URI=<provider url> DN="cn=<sample value>,dc=<sample value>,dc=com" ldap_sasl_bind_s failed (-1) Oct 16 14:15:52 <our ldap host> slapd[853103]: do_syncrepl: rid=001 rc -1 retrying (3 retries left) Oct 16 14:15:52 <our ldap host> slapd[853103]: daemon: activity on 1 descriptor Oct 16 14:15:52 <our ldap host> slapd[853103]: daemon: activity on: Oct 16 14:15:52 <our ldap host> slapd[853103]: Oct 16 14:15:52 <our ldap host> slapd[853103]: daemon: epoll: listen=7 active_threads=0 tvp=zero Oct 16 14:15:52 <our ldap host> slapd[853103]: daemon: epoll: listen=8 active_threads=0 tvp=zero Oct 16 14:15:52 <our ldap host> slapd[853103]: daemon: epoll: listen=9 active_threads=0 tvp=zero Oct 16 14:15:52 <our ldap host> slapd[853103]: daemon: epoll: listen=10 active_threads=0 tvp=zero Oct 16 14:15:52 <our ldap host> slapd[853103]: daemon: epoll: listen=11 active_threads=0 tvp=zero Oct 16 14:15:57 <our ldap host> slapd[853103]: daemon: epoll: listen=7 active_threads=0 tvp=zero Oct 16 14:15:57 <our ldap host> slapd[853103]: daemon: epoll: listen=8 active_threads=0 tvp=zero Oct 16 14:15:57 <our ldap host> slapd[853103]: daemon: epoll: listen=9 active_threads=0 tvp=zero Oct 16 14:15:57 <our ldap host> slapd[853103]: daemon: epoll: listen=10 active_threads=0 tvp=zero Oct 16 14:15:57 <our ldap host> slapd[853103]: daemon: epoll: listen=11 active_threads=0 tvp=zero Oct 16 14:15:57 <our ldap host> slapd[853103]: =>do_syncrepl rid=001 Oct 16 14:15:57 <our ldap host> slapd[853103]: slap_client_connect: URI=<provider url> DN="cn=<sample value>,dc=<sample value>,dc=com" ldap_sasl_bind_s failed (-1) Oct 16 14:15:57 <our ldap host> slapd[853103]: do_syncrepl: rid=001 rc -1 retrying (2 retries left) Oct 16 14:15:57 <our ldap host> slapd[853103]: daemon: activity on 1 descriptor

4 9

Re: multi-master OpenLDAP with SASL/GSSAPI
by Travis Bean 04 Nov '24

04 Nov '24

On Tue, Jul 30, 2024 at 2:29 PM Quanah Gibson-Mount <quanah(a)fast-mail.org> wrote: > > > > --On Sunday, July 28, 2024 7:09 PM -0700 Travis Bean <tbean74(a)gmail.com> > wrote: > > > I developed a Bash script (https://launchpad.net/linuxha) to automate > > the installation and configuration of complex Linux software that is > > out of reach for most people. I want the syntax of this script to be > > perfect so I can use it as a teaching tool to educate people about > > Linux. > > > > If anyone on this mailing list is knowledgeable about multi-master > > OpenLDAP with SASL/GSSAPI authentication, please review the > > OpenLDAP/SASL/GSSAPI code that is part of my LinuxHA script and > > provide feedback. Thank you. > Just glancing at your script I see errors, such as: > > SASL_MECH GSSAPI PLAIN > > for ldap.conf. The man page clearly notes this takes a SINGLE mechanism. If ldap.conf(5) only supports one SASL mechanism for the SASL_MECH variable, then the man page at https://www.openldap.org/software/man.cgi?query=ldap.conf needs to be updated to clarify this. I originally configured the SASL_MECH variable for OpenLDAP's ldap.conf(5) the same way I configured the mech_list variable for Postfix's smtpd.conf and the auth_mechanisms variable for Dovecot's 10-auth.conf. I configured multiple SASL mechanisms for each of these variables for testing purposes. For a local area network, a system administrator has complete control over all the workstations and can make sure they all have Kerberos installed. For internet facing servers providing services to the wide area network (WAN), it makes sense to use a second SASL mechanism (something other than SASL/GSSAPI) in case any WAN devices do not have Kerberos installed, since a sysadmin may have no control over what is installed on WAN devices. I recently replaced libpam-ldap and libnss-ldap with sssd-ldap and sssd-krb5 for LinuxHA, since SSSD is a much better solution for identity and authentication. > Also, SASL/PLAIN is insecure and should never be used. Technically this is true. Even though when SASL/PLAIN is used in conjunction with Transport Layer Security, the credentials are encrypted. When ldap.conf(5) is installed on a server (as was the case when I was testing ldap.conf(5) on LinuxHA), using SASL/PLAIN is not insecure because it is only connected to a local socket on the local machine. > Another note is that SASL/GSASPI is extremely dependent on valid hostname > resolution. The pam ldap.conf seems unlikely to work (ldap://localhost for > the URI). When /etc/ldap.conf (the configuration file for PADL’s pam_ldap and nss_ldap modules) or /etc/ldap/ldap.conf (the configuration file for client applications such as ldapsearch, ldapadd, ldapmodify, and ldapdelete) is installed on a server rather than a workstation, you use "uri ldap://localhost", or "uri ldap://127.0.0.1", or better yet use LDAP over IPC mechanisms (LDAP over Inter-Process Communication) a.k.a. UNIX domain sockets (i.e., "uri ldapi:///"). See the following webpage for further details: https://datatracker.ietf.org/doc/html/draft-chu-ldap-ldapi-00 > I see so many things that are bad practice in this script in general I'm > not going to spend any more time reviewing it. I have tried very hard to make sure there are no “bad practices” incorporated into LinuxHA. From a security standpoint, I have attempted to design LinuxHA so it is one step ahead of standard security policies. Everytime Canonical releases a new version of Ubuntu Server, the configuration for LinuxHA has to be updated. I have tested LinuxHA on seven versions of Ubuntu Server thus far — from 12.04 to 24.04. Even though I try to go through all the software packages incorporated into LinuxHA everytime Canonical releases a new version of Ubuntu Server to see if any configuration file has changed and needs to be updated, it may take awhile to complete these updates. If you find any misconfiguration in LinuxHA, please submit a bug report: https://bugs.launchpad.net/linuxha/+filebug Kind regards, Travis Bean

3 2

Removing AutoCA overlay, objectClass, etc
by Brendan Kearney 29 Oct '24

29 Oct '24

list members, i have a multi-provider footprint that i want to remove the AutoCA functionality from. when i loaded the overlay, i set it to disabled, per the below: dn: olcOverlay={5}autoca objectClass: olcOverlayConfig objectClass: olcAutoCAConfig objectClass: top olcOverlay: {5}autoca structuralObjectClass: olcAutoCAConfig entryUUID: 739501f2-49ad-103e-911a-3dc9b40470bf creatorsName: uid=brendan,ou=domainusers,ou=users,dc=bpk2,dc=com createTimestamp: 20240117175614Z olcAutoCADays: 3650 olcAutoCAKeybits: 2048 olcDisabled: TRUE olcAutoCAserverKeybits: 2048 olcAutoCAuserClass: inetOrgPerson olcAutoCAserverClass: device olcAutoCAserverDays: 1826 olcAutoCAuserDays: 365 olcAutoCAuserKeybits: 2048 entryCSN: 20240117192443.210024Z#000000#001#000000 modifiersName: uid=brendan,ou=domainusers,ou=users,dc=bpk2,dc=com modifyTimestamp: 20240117192443Z note, olcDisabled is set to true. it seems that something went awry and even though i didn't want the capability active, i wound up with some caCertificate and caPrivateKey objects created in the DIT. it looks like i may have added the overlay in an active state and disabled it after the caCertificate/PrivateKey objects were created. i want to clean up things and remove the AutoCA pieces until i can test them better. what process is needed to remove the objects and overlay, as replication may play a part in some of the effort? i could imagine that deleting the caCertificate and caPrivateKey objects would be relatively straight forward, but the overlay may prove a bit more complicated. i found a message on this list from some time ago, https://www.openldap.com/lists/openldap-technical/201811/msg00075.html, that says i can stop the slapd instance, remove the overlay ldif files and restart the instance, to accomplish this task. the issue that i am trying to avoid is having to take down the entire fully replicated DIT, in order to delete the overlay and not have replication recreate it because one active node "didn't get the memo". are there any insights into how i can delete overlays without having replication recreate the objects i want to remove, all while still providing at least one instance to service requests? if it clarifies things, i am running 3 slapd instances behind a load balancer and both the config DB and DIT are replicated between all nodes. if it comes to it, i could take down all instances to perform this work, but i would like to avoid it if possible. thanks in advance, brendan kearney

3 8

Unnamed sub-databases in LMDB
by ruben.soh＠rutgers.edu 26 Oct '24

26 Oct '24

Background: I am trying to implement a fully dynamic connectivity algorithm, based on this paper (https://dl.acm.org/doi/10.1145/502090.502095), using LMDB as the backend. Other implementations use an in-memory binary search tree. I am currently working on trying to implement an Euler Tour Forest using LMDB. Essentially, an Euler Tour of an unbalanced tree is obtained by doing a DFS and assigning an increasing index every time we visit a node (https://en.m.wikipedia.org/wiki/Euler_tour_technique). An Euler Tour Tree is simply a balanced tree containing the euler tour index as the key and a pointer to the node as the value, so I plan to store each Euler Tour Tree using an LMDB database. Problem: I need an unlimited amount of sub-databases - my first thought was to use mdb_dbi_open, however, it seems like this doesn't scale well because a list of named sub-databases is stored in every transaction. In the talk about LMDB's functionality at CMU (https://www.youtube.com/watch?v=tEa5sAh-kVk) there is some reference to sub-databases, but from reading the code it seems like unnamed sub-databases are only used for sorted duplicate keys. Am I correct in thinking that I'm going to need to add some new code to support unnamed sub-databases, or is there some way to do it that I'm not recognizing? And if I do need to change things, where should I start? Ruben Soh

2 1

Error after OpenLDAP update from 2.4 to 2.5 - ppolicy schema
by sharbich＠t-online.de 21 Oct '24

21 Oct '24

Hello, unfortunately I missed the update version note for the schema ppolicy. After updating and restarting the slapd service, I can no longer delete the schema. I get the following error message: "root@dsme01:~# slapcat -n0 > config.ldif olcAttributeTypes: value #0 olcAttributeTypes: Duplicate attributeType: "1.3.6.1.4.1.42.2.27.8.1.1" config error processing cn={15}ppolicy,cn=schema,cn=config: olcAttributeTypes: Duplicate attributeType: "1.3.6.1.4.1.42.2.27.8.1.1" slapcat: bad configuration file!" What can I do now? Greetings from Stefan Harbich

3 2

Help me understand LMDB internals
by ruben.soh＠rutgers.edu 20 Oct '24

20 Oct '24

I am a student trying to understand the code for LMDB. One thing I am confused about - there is apparently no mutex for creating a reader transaction. In the function mdb_txn_renew0, which is called by mdb_txn_begin to create the transaction, I see that if we are creating a read-only transaction, we select a meta page without acquiring any mutex. Then, the meta page snapshotted in these lines (and accessed later in the function as well): /* Copy the DB info and flags */ memcpy(txn->mt_dbs, meta->mm_dbs, CORE_DBS * sizeof(MDB_db)); /* Moved to here to avoid a data race in read TXNs */ txn->mt_next_pgno = meta->mm_last_pg+1; What happens if a write transaction commits to the meta page while this copy is happening? Isn't it possible that the reader transaction will have copied an inconsistent view of the meta page? Sincerely, Ruben

2 1

Re: Replication issue during performance test with MMR configuration and LastBind enabled
by Falgon 16 Oct '24

16 Oct '24

Hello, I'm working on the same project as Meheni. Thanks for your answer, we'll try version 2.6 OpenLDAP using the lastbind-precision. However we have several questions for the current version we're using. Is this a known problem and referenced somewhere? (we haven't found it) Is it normal to find no replication error logs even in stats + sync mode? We ran some tests in sequential mode (300,000 accounts one after the other) and managed to reproduce the problem. -Denis Le mer. 11 oct. 2023 à 14:11, Quanah Gibson-Mount <quanah(a)fast-mail.org> a écrit : > > > --On Tuesday, October 10, 2023 9:30 PM +0200 Ziani Meheni > <mehani06(a)gmail.com> wrote: > > > > > > > Hello, we are working on a project and we've come across a problem with > > the replication after performance testing : > > You need to use OpenLDAP 2.6 and then set the: > > lastbind-precision > > value. I use 5 minutes. > > --Quanah >

4 8

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

openldap-technical October 2024