You also should check the sshd_config and make sure you have "UsePAM yes" in
the config
-----Original Message-----
From: GanGan [mailto:gangan@zalteam.com]
Sent: Wednesday, October 29, 2008 12:03 PM
To: Lynn York
Cc: Hallvard B Furuseth; Openldap technical
Subject: RE: difference between /etc/ldap.conf /etc/openldap/ldap.conf
I did not touch so I do not think it comes from this files
On Wed, 29 Oct 2008 11:55:29 -0400, Lynn York <lyork(a)inetu.net> wrote:
Make sure have configured PAM properly. Here is an example of a
system-auth-ac file that I use that works properly:
[ /etc/pam.d/system-auth-ac ]
#%PAM-1.0
# This file is auto-generated.
# User changes will be destroyed the next time authconfig is run.
auth required pam_env.so
auth sufficient pam_unix.so nullok try_first_pass
auth sufficient pam_ldap.so use_first_pass
auth required pam_deny.so
account required pam_unix.so broken_shadow
account sufficient pam_localuser.so
account sufficient pam_succeed_if.so uid < 500 quiet
account [default=bad success=ok user_unknown=ignore] pam_ldap.so
account required pam_permit.so
password requisite pam_cracklib.so try_first_pass retry=3
password sufficient pam_unix.so md5 shadow nullok try_first_pass
use_authtok
password sufficient pam_ldap.so use_authtok
password required pam_deny.so
session optional pam_keyinit.so revoke
session required pam_limits.so
session [success=1 default=ignore] pam_succeed_if.so service in crond
quiet use_uid
session required pam_unix.so
session optional pam_ldap.so
[ end /etc/pam.d/system-auth-ac ]
-----Original Message-----
From: openldap-technical-bounces+lyork=inetu.net(a)openldap.org
[mailto:openldap-technical-bounces+lyork=inetu.net@openldap.org] On
Behalf
Of
GanGan
Sent: Wednesday, October 29, 2008 11:28 AM
To: Hallvard B Furuseth
Cc: Openldap technical
Subject: Re: difference between /etc/ldap.conf /etc/openldap/ldap.conf
thank you
I have a problem with my users authentication.
getent passwd
gives me my 4 users ldap
[...]
videl:x:503:1000:videl:/home/videl:/bin/bash
azerty:x:501:1000:azerty:/home/azerty:/bin/bash
wizz:x:515:1000:wizz:/home/wizz:/bin/bash
shen:x:509:1000:shen:/home/shen:/bin/bash
but impossible to connect.
[root@clitest3 /]# ssh videl(a)srvtest3.test.org
videl(a)srvtest3.test.org's password:
Permission denied, please try again.
videl(a)srvtest3.test.org's password:
Permission denied, please try again.
videl(a)srvtest3.test.org's password:
Permission denied (publickey,password).
log ldap server (srvtest3):
Oct 29 16:25:41 srvtest3 slapd[1947]: conn=19 fd=14 ACCEPT from
IP=127.0.0.1:40706 (IP=0.0.0.0:389)
Oct 29 16:25:41 srvtest3 slapd[1947]: conn=19 op=0 STARTTLS
Oct 29 16:25:41 srvtest3 slapd[1947]: conn=19 fd=14 TLS established
tls_ssf=256 ssf=256
Oct 29 16:25:41 srvtest3 slapd[1947]: conn=19 op=0 RESULT oid= err=0
text=
Oct 29 16:25:41 srvtest3 slapd[1947]: conn=19 op=1 BIND
dn="" method=128
Oct 29 16:25:41 srvtest3 slapd[1947]: conn=19 op=1 RESULT tag=97 err=0
text=
Oct 29 16:25:41 srvtest3 slapd[1947]: conn=19 op=2 SRCH
base="ou=user,dc=midian,dc=org" scope=2 deref=0
filter="(&(objectClass=posixAccount)(uid=videl))"
Oct 29 16:25:41 srvtest3 slapd[1947]: conn=19 op=2 SRCH attr=uid
userPassword uidNumber gidNumber cn homeDirectory loginShell gecos
description objectClass
Oct 29 16:25:41 srvtest3 slapd[1947]: conn=19 op=2 SEARCH RESULT tag=101
err=0 nentries=0 text=
Oct 29 16:25:45 srvtest3 slapd[1947]: conn=19 op=3 SRCH
base="ou=user,dc=midian,dc=org" scope=2 deref=0
filter="(&(objectClass=posixAccount)(uid=videl))"
Oct 29 16:25:45 srvtest3 slapd[1947]: conn=19 op=3 SRCH attr=uid
userPassword uidNumber gidNumber cn homeDirectory loginShell gecos
description objectClass
Oct 29 16:25:45 srvtest3 slapd[1947]: conn=19 op=3 SEARCH RESULT tag=101
err=0 nentries=0 text=
Oct 29 16:25:45 srvtest3 slapd[1947]: conn=20 fd=17 ACCEPT from
IP=127.0.0.1:40707 (IP=0.0.0.0:389)
Oct 29 16:25:45 srvtest3 slapd[1947]: conn=20 op=0 STARTTLS
Oct 29 16:25:45 srvtest3 slapd[1947]: conn=20 op=0 RESULT oid= err=0
text=
Oct 29 16:25:45 srvtest3 slapd[1947]: conn=20 fd=17 TLS established
tls_ssf=256 ssf=256
Oct 29 16:25:45 srvtest3 slapd[1947]: conn=20 op=1 BIND dn="" method=128
Oct 29 16:25:45 srvtest3 slapd[1947]: conn=20 op=1 RESULT tag=97 err=0
text=
Oct 29 16:25:45 srvtest3 slapd[1947]: conn=20 op=2 SRCH
base="ou=user,dc=midian,dc=org" scope=2 deref=0
filter="(&(host=srvtest3.test.org)(uid=videl))"
Oct 29 16:25:45 srvtest3 slapd[1947]: <= bdb_equality_candidates: (host)
index_param failed (18)
Oct 29 16:25:45 srvtest3 slapd[1947]: conn=20 op=2 SEARCH RESULT tag=101
err=0 nentries=0 text=
I do not understand why it is not working. :(
any idea ?
--
- GanGan -
www.system-linux.eu merci pour le clique sur la pub :p