Greetings all,
I'm trying to figure out why Syncrepl is only syncing part of my provider's database when I use GSSAPI to connect. Both my provider and consumer are on 2.4.40. Here are all the steps I'm taking:
My provider is working fine, I've been using it for months now without any issues. I added this to the provider:
dn: olcOverlay={0}syncprov,olcDatabase={1}mdb,cn=config objectClass: olcSyncProvConfig olcOverlay: {0}syncprov olcSpCheckpoint: 100 10 structuralObjectClass: olcSyncProvConfig entryUUID: b32ac160-29e6-1036-8d0a-07ef98fd592e creatorsName: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth createTimestamp: 20161019012544Z olcSpSessionlog: 100 entryCSN: 20161024233803.817199Z#000000#000#000000 modifiersName: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth modifyTimestamp: 20161024233803Z
I also indexed entryCSN and entryUUID on the provider. I have olcAuthzRegexp setup on the provider as well.
olcAuthzRegexp: {0}"uid=admin,cn=harmonywave.com,cn=GSSAPI,cn=auth" "cn=admin,dc=harmonywave,dc=com" olcAuthzRegexp: {1}"uid=ldap/admin,cn=harmonywave.com,cn=GSSAPI,cn=auth" "dn.exact=gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth" olcAuthzRegexp: {2}"uid=syncprov,cn=harmonywave.com,cn=GSSAPI,cn=auth" "cn=syncprov,dc=harmonywave,dc=com" #not using this. olcAuthzRegexp: {3}"uid=.*/admin,cn=harmonywave.com,cn=GSSAPI,cn=auth" "cn=admin,dc=harmonywave,dc=com" olcAuthzRegexp: {4}"uid=host/([^.]*).harmonywave.com,cn=harmonywave.com,cn=GSSAPI,cn=auth" "cn=$1+ipHostNumber=.*,ou=Hosts,dc=harmonywave,dc=com" olcAuthzRegexp: {5}"uid=([^/]*),cn=harmonywave.com,cn=GSSAPI,cn=auth" "uid=$1,ou=End Users,ou=People,dc=harmonywave,dc=com"
On the consumer I have slapd installed. The first thing I did was change the olcSuffix on my database. I'm not sure if this is required or not.
dn: olcDatabase={1}mdb,cn=config changetype: modify replace: olcSuffix olcSuffix: dc=harmonywave,dc=com - replace: olcRootDN olcRootDN: cn=admin,dc=harmonywave,dc=com
Then I'm adding my ldap keytab for the consumer.
kadmin: ktadd -k /etc/ldap/ldap.keytab ldap/consumer.harmonywave.com consumer: ~# chown openldap:openldap /etc/ldap/ldap.keytab consumer: ~# chmod 0640 /etc/ldap/ldap.keytab
I edited my /etc/default/slapd file and pointed the KRB5_KTNAME environment variable to the new keytab then restarted slapd. Next I installed kstart and created a ticket cache.
consumer: ~# k5start -U -f /etc/ldap/ldap.keytab -K 10 -l 24h -k /tmp/krb5cc_108 -o openldap -b
I can see the ldap service's keytab with klist.
consumer: ~# klist /tmp/krb5cc_108
Ticket cache: FILE:/tmp/krb5cc_108 Default principal: ldap/koprulu.harmonywave.com@HARMONYWAVE.COM
Valid starting Expires Service principal 10/28/2016 21:18:14 10/29/2016 07:18:14 krbtgt/HARMONYWAVE.COM@HARMONYWAVE.COM renew until 10/29/2016 21:18:14
Then I add my olcSaslRealm
dn: cn=config changetype: modify add: olcSaslRealm olcSaslRealm: HARMONYWAVE.COM
Here is what my database looks like right before I add olcSyncrepl:
dn: olcDatabase={1}mdb,cn=config objectClass: olcDatabaseConfig objectClass: olcMdbConfig olcDatabase: {1}mdb olcDbDirectory: /var/lib/ldap olcAccess: {0}to attrs=userPassword,shadowLastChange by self write by anonym ous auth by * none olcAccess: {1}to dn.base="" by * read olcAccess: {2}to * by * read olcLastMod: TRUE olcRootPW:: ... olcDbCheckpoint: 512 30 olcDbMaxSize: 1073741824 structuralObjectClass: olcMdbConfig entryUUID: 9a091324-2e84-1036-8b7a-73db8891632a creatorsName: cn=admin,cn=config createTimestamp: 20161024222607Z olcSuffix: dc=harmonywave,dc=com olcRootDN: cn=admin,dc=harmonywave,dc=com olcDbIndex: cn,uid eq olcDbIndex: entryCSN eq olcDbIndex: entryUUID eq olcDbIndex: member,memberUid eq olcDbIndex: objectClass eq olcDbIndex: uidNumber,gidNumber eq entryCSN: 20161029033105.691204Z#000000#000#000000 modifiersName: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth modifyTimestamp: 20161029033105Z
then I add olcSyncrepl to the consumer.
dn: olcDatabase={1}mdb,cn=config changetype: modify add: olcSyncrepl olcSyncrepl: {0}rid=000 provider=ldap://provider.harmonywave.com type=RefreshAndPersist retry="30 10 1800 +" searchbase="dc=harmonywave,dc=com" bindmethod=sasl saslmech=GSSAPI starttls=critical tls_cacert=/etc/ssl/certs/ca.harmonywave.com.pem tls_reqcert=demand
After that I slapcat on the consumer and I only see about 1/3 of my data from the provider. When I watch the log on the provider this is what I get:
Oct 28 21:39:02 baneling slapd[12540]: conn=4421 fd=36 ACCEPT from IP=10.1.30.19:55992 (IP=0.0.0.0:389) Oct 28 21:39:02 baneling slapd[12540]: conn=4421 op=0 EXT oid=1.3.6.1.4.1.1466.20037 Oct 28 21:39:02 baneling slapd[12540]: conn=4421 op=0 STARTTLS Oct 28 21:39:02 baneling slapd[12540]: conn=4421 op=0 RESULT oid= err=0 text= Oct 28 21:39:02 baneling slapd[12540]: conn=4421 fd=36 TLS established tls_ssf=128 ssf=128 Oct 28 21:39:02 baneling slapd[12540]: conn=1005 op=43768 SRCH base="dc=harmonywave,dc=com" scope=2 deref=0 filter="(&(|(objectClass=krbPrincipalAux)(objectClass=krbPrincipal))(krbPrincipalName=krbtgt/HARMONYWAVE.COM@HARMONYWAVE.COM))" Oct 28 21:39:02 baneling slapd[12540]: conn=1005 op=43768 SRCH attr=krbprincipalname krbcanonicalname objectclass krbprincipalkey krbmaxrenewableage krbmaxticketlife krbticketflags krbprincipalexpiration krbticketpolicyreference krbUpEnabled krbpwdpolicyreference krbpasswordexpiration krbLastFailedAuth krbLoginFailedCount krbLastSuccessfulAuth krbLastPwdChange krbLastAdminUnlock krbExtraData krbObjectReferences krbAllowedToDelegateTo Oct 28 21:39:02 baneling slapd[12540]: conn=1005 op=43768 SEARCH RESULT tag=101 err=0 nentries=1 text= Oct 28 21:39:02 baneling slapd[12540]: conn=1005 op=43769 SRCH base="dc=harmonywave,dc=com" scope=2 deref=0 filter="(&(|(objectClass=krbPrincipalAux)(objectClass=krbPrincipal))(krbPrincipalName=ldap/baneling.harmonywave.com@HARMONYWAVE.COM))" Oct 28 21:39:02 baneling slapd[12540]: conn=1005 op=43769 SRCH attr=krbprincipalname krbcanonicalname objectclass krbprincipalkey krbmaxrenewableage krbmaxticketlife krbticketflags krbprincipalexpiration krbticketpolicyreference krbUpEnabled krbpwdpolicyreference krbpasswordexpiration krbLastFailedAuth krbLoginFailedCount krbLastSuccessfulAuth krbLastPwdChange krbLastAdminUnlock krbExtraData krbObjectReferences krbAllowedToDelegateTo Oct 28 21:39:02 baneling slapd[12540]: conn=1005 op=43769 SEARCH RESULT tag=101 err=0 nentries=1 text= Oct 28 21:39:02 baneling slapd[12540]: conn=1005 op=43770 SRCH base="dc=harmonywave,dc=com" scope=2 deref=0 filter="(&(|(objectClass=krbPrincipalAux)(objectClass=krbPrincipal))(krbPrincipalName=ldap/koprulu.harmonywave.com@HARMONYWAVE.COM))" Oct 28 21:39:02 baneling slapd[12540]: conn=1005 op=43770 SRCH attr=krbprincipalname krbcanonicalname objectclass krbprincipalkey krbmaxrenewableage krbmaxticketlife krbticketflags krbprincipalexpiration krbticketpolicyreference krbUpEnabled krbpwdpolicyreference krbpasswordexpiration krbLastFailedAuth krbLoginFailedCount krbLastSuccessfulAuth krbLastPwdChange krbLastAdminUnlock krbExtraData krbObjectReferences krbAllowedToDelegateTo Oct 28 21:39:02 baneling slapd[12540]: conn=1005 op=43770 SEARCH RESULT tag=101 err=0 nentries=1 text= Oct 28 21:39:02 baneling slapd[12540]: conn=4421 op=1 BIND dn="" method=163 Oct 28 21:39:02 baneling slapd[12540]: conn=4421 op=1 RESULT tag=97 err=14 text=SASL(0): successful result: Oct 28 21:39:02 baneling slapd[12540]: conn=4421 op=2 BIND dn="" method=163 Oct 28 21:39:02 baneling slapd[12540]: conn=4421 op=2 RESULT tag=97 err=14 text=SASL(0): successful result: Oct 28 21:39:02 baneling slapd[12540]: conn=4421 op=3 BIND dn="" method=163 Oct 28 21:39:02 baneling slapd[12540]: conn=4421 op=3 BIND authcid="ldap/koprulu.harmonywave.com@HARMONYWAVE.COM" authzid="ldap/koprulu.harmonywave.com@HARMONYWAVE.COM" Oct 28 21:39:02 baneling slapd[12540]: conn=4421 op=3 BIND dn="uid=ldap/koprulu.harmonywave.com,cn=harmonywave.com,cn=gssapi,cn=auth" mech=GSSAPI sasl_ssf=56 ssf=128 Oct 28 21:39:02 baneling slapd[12540]: conn=4421 op=3 RESULT tag=97 err=0 text= Oct 28 21:39:02 baneling slapd[12540]: conn=4421 op=4 SRCH base="dc=harmonywave,dc=com" scope=2 deref=0 filter="(objectClass=*)" Oct 28 21:39:02 baneling slapd[12540]: conn=4421 op=4 SRCH attr=* + Oct 28 21:39:02 baneling slapd[12540]: conn=4421 op=5 UNBIND Oct 28 21:39:02 baneling slapd[12540]: conn=4421 fd=36 closed
The only thing I really notice from this is near the end of the file. It when it searches the base with attributes "*+", but then immediately unbinds. I've seen people stating that authzid is required, but when I don't provide it I still get a partial sync, so I'm not sure about this. I've restored my consumer to a clean install of slapd and repeated the above steps with minor variations several times but the consumer always syncs the exact same amount of data and then seems to stop.
Any help to point me in the right direction would be appreciated.
Thanks, Joshua Schaeffer **