Thanks a lot for the reply Quanah.
Definitely makes sense to not use loglevels that don’t even apply. I was just kinda desperate and tried lots of things.
However I made progress lately and actually got it to work (was an ACL issue after all). So there is currently no need for further assistance. Though I will check if I still have that duplicate entry in the config. Thanks for pointing that out.
Unfortunately I didn’t get to write to the list as I wanted to write up something more comprehensive because the documentation on the meta backend is kinda sparse aside from the man page. Hopefully I will get to that in the next days to have something more recent than posts from 10 years ago for people who search for the same issue as I did.
Best regards and thanks again, Cyril
On 18 Dec 2024, at 22:59, Quanah Gibson-Mount quanah@fast-mail.org wrote:
--On Friday, November 29, 2024 12:37 PM +0100 cyril@stoll.info mailto:cyril@stoll.info wrote:
Hi there
Sorry for the long post however I aim to provide as much information as possible to help pinpoint the issue. Also sorry for any wrong wording as I am still a bit overwhelmed with OpenLDAP and struggle to understand everything I need.
From my predecessor I inherited an OpenLDAP 2.4.x cluster running on RHEL 7. My job is to migrate this cluster to OpenLDAP 2.6.x on RHEL 8. The cluster consists of two provider and four consumer servers. The old cluster was based on self-compiled original OpenLDAP binaries. For the new cluster I am using the LTB version of OpenLDAP, currently with version 2.6.8. I also switched from HDB to MDB with the new cluster and am using Let's Encrypt instead of DigiCert certificates and upped the TLS version from 1.0 to 1.2. And for the default password hashing algorhythm I switched from SSHA to ARGON2. So there are lots of changes that might potentially influence the meta databases though I did not see anything that suggests this.
I would remove the shell loglevel from your config since you don't use any shell backends.
Sometimes I'll use slapd in debug mode (-d -1) to get a full dump of everything to dig through.
I noted that you have a duplicate entry for one of the meta backends:
dn: olcMetaSub={0}uri,olcDatabase={2}meta,cn=config
dn: olcMetaSub={1}uri,olcDatabase={2}meta,cn=config
These appear to have identical configurations, which may be a problem? The other URIs on a same meta db have different rewrite options, but on the above, they are the same.
--Quanah