Jerome, I’m not certain it’s required however as a matter of practice, I’ve always separated the server certificate from the key.
openssl pkcs12 -in bundle.pfx -nocerts -out slapdserver.key -nodes -> this will give you the key without the cert (olcTLSCertificateKeyFile) openssl pkcs12 -in bundle.pfx -nokeys -out slapdserver.pem -nodes -> this will give you the certificate without the key (olcTLSCertificateFile)
And include the path to the certificate issuing CA chain (olcTLSCACertificateFile) in pem format in your configuration.
We still have a few 2.4.59 replica’s that work just fine with the above approach although admittedly they aren’t running a version as old as what you are running. Hopefully that helps….
Best, Aaron
From: Jérôme BECOT jerome.becot@deveryware.com Sent: Monday, September 25, 2023 11:10 AM To: openldap-technical@openldap.org Subject: Help troubleshooting SSL certificates issue
Warning: This email is from outside the company. Be careful clicking links or attachments.
Hello,
We have a couple of old ldap servers (Debian 7/openldap 2.4.31) on which we try to replace the certificates. On these servers we have a bundled configuration:
# config dn: cn=config olcTLSCACertificateFile: /etc/ldap/tls/multi.deverywa.re.pem olcTLSCertificateFile: /etc/ldap/tls/multi.deverywa.re.pem olcTLSCertificateKeyFile: /etc/ldap/tls/multi.deverywa.re.pem
The file is a bundle containing both the certificates (wildcard and it's issuer) and the key. Until this year we just had to upload the new bundle and restart slapd. This year Gandi changed their signing certificate but it is still issued by UserTrust. But OpenLDAP refuses to use it now.
We tried to set LogLevel to any, but nothing really showed in the log. On the server side:
slapd[9217]: connection_read(16): TLS accept failure error=-1 id=1041, closing
On the client side (localhost):
openssl s_client -connect localhost:636 -servername ldap.deverywa.re CONNECTED(00000003) 140365161965224:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:177: --- no peer certificate available --- No client certificate CA names sent --- SSL handshake has read 0 bytes and written 315 bytes --- New, (NONE), Cipher is (NONE) Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1.2 Cipher : 0000 Session-ID: Session-ID-ctx: Master-Key: Key-Arg : None PSK identity: None PSK identity hint: None SRP username: None Start Time: 1695652388 Timeout : 300 (sec) Verify return code: 0 (ok)
We still use 2048 RSA key to generate the certificates. We have checked permissions and it is fine. How could I debug what's wrong on the server side ?
Thank you -- Jérôme BECOT Ingénieur DevOps Infrastructure
Téléphone fixe: 01 82 28 37 06 Mobile : +33 757 173 193 Deveryware - 43 rue Taitbout - 75009 PARIS https://www.deveryware.comhttps://urldefense.com/v3/__https:/www.deveryware.com__;!!PIfy-9xbww!BDpoZpMSRD8FwKe3tzRyRSZqBI7j-HhYu5k2anY8TpzoZ3M9l6TIRxLIOQhxzK93qIqoiBSLDgnqAPGoKSfO6cmx0KI$
[Deveryware_Logo]
---------------------------------------------------------------------- The information contained in this message may be privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify your representative immediately and delete this message from your computer. Thank you.
