openldap-software

openldap-software@openldap.org

2719 discussions

Re: filtered logging
by Gavin Henry 01 Jul '07

01 Jul '07

<quote who="Kambiz Behrooz"> > Excise me. I should explain better > Log level is set to 0x240 but then we get both success and errors for > stats2 and config and there is no way to just get errors which we need > only. IIRC, try "loglevel none", this will only have high priority messages logged, i.e. erorrs. > > Thanks > >> If I understand right so I need to send it to >> openldap-software(a)openldap.org , right? > > Yes. > >> >> by the way I never used overlay before. > > Ok. > >> >> The company I work for use ldap pretty much and log file get big very >> fast >> and same times they are only interested on just "errors". Last time it >> was >> just a few lines on the file they needed and the log file contained over >> 100K lines. > > This is the information I was after. If they only want to log errors, > change the "loglevel" setting. See "man slapd.conf". This is what man > pages are for ;-) > > What loglevel is it currently on. > >> >> Thanks for the information >> >> Kind Regards, >> Kambiz Behrooz >> >> >> >> >> Kambiz Behrooz wrote: >>> I am new on openldap (and ldap and this maillist). >>> My company wants to have more control on the logging and I have to >>> make changes on openldap and probably make changes so the can be on >>> next version openldap. >>> >>> Does openldap use only syslog for all logging ? >>> where is easiest to begin ? >>> How good need the code be to have chance to be add to openldap ? >>> >>> Thanks for any information >>> >>> >> >> This is really for the openldap-software list. Please resend. >> >> Anyway.... >> >> Have you looked at the accesslog overlay? You haven't mentioned why/what >> logging is inadequate? >> >> Gavin >> >> >> -- >> Kind Regards, >> >> Gavin Henry. >> Managing Director. >> >> T +44 (0) 1224 279484 >> M +44 (0) 7930 323266 >> F +44 (0) 1224 824887 >> E ghenry(a)suretecsystems.com >> >> Open Source. Open Solutions(tm). >> >> http://www.suretecsystems.com/ >> >> >> >> ____________________________________________________________________________________ >> Building a website is a piece of cake. Yahoo! Small Business gives you >> all >> the tools to get online. >> http://smallbusiness.yahoo.com/webhosting > > > > ____________________________________________________________________________________ > Get the Yahoo! toolbar and be alerted to new email wherever you're > surfing. > http://new.toolbar.yahoo.com/toolbar/features/mail/index.php

1 0

WARNING: No dynamic config support for MODULE
by Manon Goo 01 Jul '07

01 Jul '07

Hi, I am using the slapd 2.3.30 debian package. I would like to have the schma and acl configuration dynamic so I am able to replicate it. but on the other hand I would like to use som overlays witch do not support the dynamic configuration. Is there any possibilty to keep schenas and acls in the dynamic configuration. And keeping the overlay and database configuration in an old style include file ? Manon Manon Goo Dembach Goo Informatik GmbH & Co KG Untersachsenhausen 33 D-50667 Köln Tel: +49 221 801483 0 Mobil: +49 177 8091974 Fax: +49 221 801483 20 Email: manon(a)dg-i.net Amtsgericht Köln HRA 22794, UST ID: DE242 159 527 Geschäftsführer: Manon Goo, Andreas Dembach Haftende Gesellschafterin: Dembach Goo Verwaltungs GmbH

3 3

multi-value attribute search result
by Piotr Wadas 01 Jul '07

01 Jul '07

Hello, using openldap 2.3.35. When I do a search for some attribute like "cn=foobar", and in set of attributes which are to be returned per-entry is "cn" attribute, all its values are returned. however, when I search with "cn=foo*", and entry has multiple "cn" values, like "cn=foo", "cn=joe", "cn=foobar", "cn=foobarX", "cn=bob", "cn=nofoobar" - is it possible to have "cn" returned, but only these values, which actually matched the filter ? Or, is it possible to find out how many values of "cn" in particular entry, matched? While doing such search in some specified case, I'm interested only with values "cn=foo", "cn=foobar" and "cn=foobarX", I do not care what are other "cn" values, nor even there are other values of "cn" which didn't match, or not. Such feature seems complicated, because filter actually may be build with many attributes, - and only if some of them are specified in return attributes, the matching values should be returned . Regards, Piotr

6 10

Re: filtered logging
by Gavin Henry 01 Jul '07

01 Jul '07

<quote who="Kambiz Behrooz"> > If I understand right so I need to send it to > openldap-software(a)openldap.org , right? Yes. > > by the way I never used overlay before. Ok. > > The company I work for use ldap pretty much and log file get big very fast > and same times they are only interested on just "errors". Last time it was > just a few lines on the file they needed and the log file contained over > 100K lines. This is the information I was after. If they only want to log errors, change the "loglevel" setting. See "man slapd.conf". This is what man pages are for ;-) What loglevel is it currently on. > > Thanks for the information > > Kind Regards, > Kambiz Behrooz > > > ----- Original Message ---- > From: Gavin Henry <ghenry(a)suretecsystems.com> > To: Kambiz Behrooz <kambiz0318(a)yahoo.com> > Cc: openldap-devel(a)openldap.org > Sent: Friday, June 29, 2007 9:28:58 PM > Subject: Re: filtered logging > > > Kambiz Behrooz wrote: >> I am new on openldap (and ldap and this maillist). >> My company wants to have more control on the logging and I have to >> make changes on openldap and probably make changes so the can be on >> next version openldap. >> >> Does openldap use only syslog for all logging ? >> where is easiest to begin ? >> How good need the code be to have chance to be add to openldap ? >> >> Thanks for any information >> >> > > This is really for the openldap-software list. Please resend. > > Anyway.... > > Have you looked at the accesslog overlay? You haven't mentioned why/what > logging is inadequate? > > Gavin > > > -- > Kind Regards, > > Gavin Henry. > Managing Director. > > T +44 (0) 1224 279484 > M +44 (0) 7930 323266 > F +44 (0) 1224 824887 > E ghenry(a)suretecsystems.com > > Open Source. Open Solutions(tm). > > http://www.suretecsystems.com/ > > > > ____________________________________________________________________________________ > Building a website is a piece of cake. Yahoo! Small Business gives you all > the tools to get online. > http://smallbusiness.yahoo.com/webhosting

1 0

Re: Help needed for problems in building OpenLDAP 2.3.33 in Suse linux - reg.
by Aaron Richton 29 Jun '07

29 Jun '07

Please keep replies on the list. Are you reading what you're pasting? It's the exact same topmost error message as your previous post! My reply cut out that error message in particular, so you might hope to scan for that phrase in the future. The exact same advice is given in the error message itself, and I'd give you the exact same regurgitation as for your previous post. The only thing different is the filename. So, do whatever you did to resolve the previous message, just change to that new file...and try reading every word that you're transmitting (self-written, pasted or otherwise) before hitting send next time. On Fri, 29 Jun 2007, Aviator LDap wrote: > Hi Aaraon, > > Thanks for your inputs. I have followed your comments which > resolved problem > in the libssl.a and now i am getting problems in libcrypto. > Please find the > details below and kindly give inputs on this. > > > ucdata.c:411: warning: assignment discards qualifiers from > pointer target > type > > ar: creating liblunicode.a > > /usr/lib64/gcc/x86_64-suse-linux/4.1.0/../../../../x86_64-suse-linux/bin/ld: > /usr/local/ssl/lib/libcrypto.a(x86_64cpuid.o): relocation > R_X86_64_PC32 > against `OPENSSL_cpuid_setup' can not be used when making a > shared object; > recompile with -fPIC > > /usr/lib64/gcc/x86_64-suse-linux/4.1.0/../../../../x86_64-suse-linux/bin/ld: > final link failed: Bad value > > collect2: ld returned 1 exit status > > make[2]: *** [libldap.la] Error 1 > > make[1]: *** [all-common] Error 1 > > make: *** [all-common] Error 1 > > base64.o base64.c > regards, > dinesh > > > On 6/28/07, Aaron Richton <richton(a)nbcs.rutgers.edu> wrote: >> >> Uhhhh....recompile /usr/local/ssl/lib/libssl.a with -fPIC, >> perhaps? >> >> On Thu, 28 Jun 2007, Aviator LDap wrote: >> >> > /usr/local/ssl/lib/libssl.a(s3_pkt.o): relocation >> R_X86_64_32 against `a >> > local symbol' can not be used when making a shared >> object; recompile >> with >> > -fPIC >> >

1 0

problems importing users and groups
by Timeu 29 Jun '07

29 Jun '07

When I try to import users and groups to LDAP I get this error: ** *# ldapadd -x -D 'cn=administrador,dc=homolog,dc=com,dc=br' -W -f users.ldif Enter LDAP Password: adding new entry "uid=root,ou=People,dc=homolog,dc=com,dc=br" ldap_add: No such object (32) matched DN: dc=homolog,dc=com,dc=br* I already readed the FAQ and applied some modfications but it's still not importing... *here comes part of my users.ldif:* *dn: uid=root,ou=People,dc=homolog,dc=com,dc=br uid: root cn: root objectClass: account objectClass: posixAccount objectClass: top objectClass: shadowAccount userPassword: {crypt}$1$/8NOCC5o$qtKfYeX8NJc7zNpGkYpWy/ shadowLastChange: 13599 shadowMax: 99999 shadowWarning: 7 loginShell: /bin/bash uidNumber: 0 gidNumber: 0 homeDirectory: /root gecos: root* *and the base.ldif:* *dn: dc=homolog,dc=com,dc=br objectclass: dcObject objectclass: organization objectClass: top o: Medlynx dc: homolog* * * *dn: cn=administrador,dc=homolog,dc=com,dc=br objectclass: organizationalRole cn: administrador* -- Timeu F. Oliveira ----------------------------------------------------------------------- Confirmado: dias 28, 29 e 30 de Setembro de 2007 em Aracaju - SE. II ENSL - Encontro Nordestino de Software Livre I LIVRE-SE - Encontro Sergipano de Software Livre http://www.linux-se.org.br

2 1

Problems in building OpenLDAP - reg.
by Aviator LDap 29 Jun '07

29 Jun '07

Hi Aaraon, Thanks for your inputs. I have followed your comments which resolved problem in the libssl.a and now i am getting problems in libcrypto. Please find the details below and kindly give inputs on this. ucdata.c:411: warning: assignment discards qualifiers from pointer target type ar: creating liblunicode.a /usr/lib64/gcc/x86_64-suse-linux/4.1.0/../../../../x86_64-suse-linux/bin/ld: /usr/local/ssl/lib/libcrypto.a(x86_64cpuid.o): relocation R_X86_64_PC32 against `OPENSSL_cpuid_setup' can not be used when making a shared object; recompile with -fPIC /usr/lib64/gcc/x86_64-suse-linux/4.1.0/../../../../x86_64-suse-linux/bin/ld: final link failed: Bad value collect2: ld returned 1 exit status make[2]: *** [libldap.la] Error 1 make[1]: *** [all-common] Error 1 make: *** [all-common] Error 1 base64.o base64.c regards, dinesh

1 0

/etc/openldap/slapd.conf and loglevel?
by mikee 28 Jun '07

28 Jun '07

Does loglevel have an effect when slapd is started (redhat: service ldap start) or only when data is loaded into the bdb database (slapadd -l /tmp/ldif). I restarted my slapd this morning and it appears to be using the logging level I specified in /etc/openldap/slapd.conf yesterday and not the logging level in /etc/openldap/slapd.conf today. Do logging levels persist from the original slapadd? Mike

2 2

Openldap out of memory problem
by jsianes＠andaluciajunta.es 28 Jun '07

28 Jun '07

Hello, I have a problem in a production environment using Openldap 2.2.13. The problem is, even establishing a reduced cachesize for Berkeley backend, my openldap server starts to consume more and more memory until all RAM is exhausted, causing server stop running (and sometimes backend corruption). I have followed indications included in faq-o-matic to calculate an accurate cache size for BDB backend (8MB), but the problem doesn't solves. At beginning, openlaps starts with few memory (as configuration indicates) but later more and more memory is consumed by the process. Here is the information about my ldap server and service in order you can give a solution. I want that mi slapd process doesn't cosume all fisical memory, basically. Server: - RAM: 1GB - Swap: 1GB Openldap: - version: 2.2.13 - sizelimit: 5000 Backend: - Type: bdb - checkpoint: 512 30 - cachesize: 5000 DB_CONFIG: - Cache (8MB): set_cachesize 0 8388608 1 - Other options: set_lg_regionmax 262144 set_lg_bsize 2097152 set_lg_dir /var/lib/ldap/logs set_lg_max 52428800 set_flags DB_LOG_AUTOREMOVE - dn2id.bdb size: 177MB - id2entry.bdb size: 555MB Top information: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ SWAP COMMAND 12547 ldap 19 0 509m 139m 13m S 1.3 13.9 9:30.32 369m slapd If I execute a pmap over slapd PID, there is a lot of RAM used by 'anon' piece of memory. Any commentary will be very appreciated. Thanks.

4 4

Help needed for problems in building OpenLDAP 2.3.33 in Suse linux - reg.
by Aviator LDap 28 Jun '07

28 Jun '07

Dear Friends, fetch.c: In function â€˜ldif_open_urlâ€™: fetch.c:52: warning: assignment discards qualifiers from pointer target type ar: creating liblutil.a ucdata.c: In function â€˜_uccase_lookupâ€™: ucdata.c:411: warning: assignment discards qualifiers from pointer target type ar: creating liblunicode.a */usr/lib64/gcc/x86_64-suse-linux/4.1.0/../../../../x86_64-suse-linux/bin/ld: /usr/local/ssl/lib/libssl.a(s3_pkt.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC /usr/local/ssl/lib/libssl.a: could not read symbols: Bad value *collect2: ld returned 1 exit status make[2]: *** [libldap.la] Error 1 make[1]: *** [all-common] Error 1 make: *** [all-common] Error 1 I am running out with this problem while trying to build OpenLDAP2.3.33 on Suse linux. Could anybody help me? regards, dinesh V

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openldap-software