openldap-software

openldap-software@openldap.org

2719 discussions

Configuration of slapo-rwm with cn=config scheme
by Master_Proper＠gmx.de 26 Jan '09

26 Jan '09

Dear all, I am currently trying to figure out how to configure the slapo-rwm overlay with the cn=config scheme. So far I was unable to find any documentation on this. The only way I could help myself is by using a "fake" slapd-conf file and converting it with slaptest -f fake.slapd.conf -F testconfig.d/ What I managed to do: 1. I created a file with the following content: $ cat rwm_moduleLoad.ldif dn: cn=module{0},cn=config changetype: modify add: olcModuleLoad olcModuleLoad: rwm.so and loaded it with ldapmodify -D "cn=admin,cn=config" -x -W -f rwm_moduleLoad.ldif 2. I tried to do the same with this file: $ cat rwm_activate.ldif dn: olcOverlay=rwm,olcDatabase={1}hdb,cn=config objectClass: olcOverlayConfig objectClass: olcRwmConfig olcOverlay: rwm olcRwmRewrite: rwm-rewriteEngine "on" olcRwmRewrite: rwm-rewriteMap "ldap" "attr2dn" "ldap://localhost/o=org?dn?sub" olcRwmRewrite: rwm-rewriteContext "bindDN" olcRwmRewrite: rwm-rewriteRule "^mail=[^,]+@[^,]+$" "${attr2dn($0)}" ":@I" olcRwmTFSupport: no olcRwmNormalizeMapped: FALSE When I wanted to add this file with ldapadd -D "cn=admin,cn=config" -x -W -f rwm_activate.ldif the following error message was returned: adding new entry "olcOverlay=rwm,olcDatabase={1}hdb,cn=config" ldap_add: Other (e.g., implementation specific) error (80) additional info: <olcRwmRewrite> handler exited with 1 Adding a file with only the follwing content suceeded: $ cat rwm_activate.ldif dn: olcOverlay=rwm,olcDatabase={1}hdb,cn=config objectClass: olcOverlayConfig objectClass: olcRwmConfig olcOverlay: rwm Can anybody help me on how to proceed? My goal is to get the sample configuration from the slapo-rwm man page working which rewrites the bindDN if an email-address is given. I am using @(#) $OpenLDAP: slapd 2.4.11 (Oct 24 2008 23:44:05) $ buildd@palmer:/build/buildd/openldap-2.4.11/debian/build/servers/slapd - the standard build on Ubuntu 8.10 (Intrepid Ibex). Thanks in advance for your support! Best regards, Proper -- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger

3 3

Syncrepl fails with LDAP_RES_INTERMEDIATE - SYNC_ID_SET
by Serge Dubrouski 25 Jan '09

25 Jan '09

Hello - I've had provider-consumer configuration working all right for about a month. Today I had to upgrade OS (RedHat 5) and restart services. After that one of my consumers failed with the following errors: Jan 24 19:32:54 rome slapd[2236]: do_syncrep2: rid=012 LDAP_RES_INTERMEDIATE - SYNC_ID_SET Jan 24 19:33:05 rome last message repeated 11 times And then started to delete records: Jan 24 19:33:40 rome slapd[2236]: syncrepl_entry: rid=012 be_modify (0) Jan 24 19:33:40 rome slapd[2236]: do_syncrep2: rid=012 LDAP_RES_SEARCH_RESULT Jan 24 19:33:40 rome slapd[2236]: do_syncrep2: cookie=rid=012,csn=20090125022613.018210Z#000000#000#000000 Jan 24 19:33:40 rome slapd[2236]: nonpresent_callback: rid=012 nonpresent UUID e7d215a2-3cc4-102d-8ea2-9f51782b1a5b, dn c=GB Jan 24 19:33:40 rome slapd[2236]: nonpresent_callback: rid=012 nonpresent UUID e7f0d37a-3cc4-102d-8ea3-9f51782b1a5b, dn o=.... Jan 24 19:33:40 rome slapd[2236]: nonpresent_callback: rid=012 nonpresent UUID e7f61ed4-3cc4-102d-8ea4-9f51782b1a5b, dn ..... To fix the problem I had to copy database from the provider to consumer and then restart that consumer. So what does that error mean and how to avoid it in the future? OpenLdap 2.4.13 DB 4.6-21 Thanks. -- Serge Dubrouski.

2 1

[OPENLDAP] slapd password confusion
by Technical Home 25 Jan '09

25 Jan '09

Hello, In my quest to install and understand how works a PDC Samba/OpenLDAP, I encountered a strange problem when setting my slapd admin password. Here is my server configuration : @(#) $OpenLDAP: slapd 2.4.11 (Oct 24 2008 23:44:05) $ buildd@palmer:/build/buildd/openldap-2.4.11/debian/build/servers/slapd I'm running ubuntu-server 8.10 Intrepid. My ubuntu is up to date. I installed the slapd package from ubuntu repository. dpkg asked me to specify a password for my admin account and I entered a password like this one : totototo12; And now when I try to modify my LDAP tree with the command "ldapmodify -x -D cn=admin,cn=config -W", at the password prompt, I can connect with all this password : totototo12; totototo12 totototo1 totototo totototo23 tototototo ... The only condition to login is that I wrote the beginning of my password : totototo Why slapd does not care about the end of my password ? If I specify a smaller password like toto12; in slapd configuration with dpkg-reconfigure, there is no problem... If you need more informations to help me to undersatnd what happens, just ask me ;) . Thanks in advance, Gilles

3 3

How can I *really* disable schema-checking?
by Salim Fadhley 24 Jan '09

24 Jan '09

I've recently inherited responsibility for an LDAP server for a large business critical operation. Unfortunately the previous developer simply added data with schema-checking off. They were using a very old version of OpenLDAP (which I can no longer use) which allowed them to disable all schema-checking. As a consequence the data is no longer compatible with the schema - all validation fails. I want to disable all schema-checking on my new server, so I used the slapd.conf directive "schemacheck off" - however this seems to be ignored. I know this because when I attempt to add an un-declared attribute to an entry in the database, the change is rejected. I understand that the "schemacheck" config directive has been deprecated in recent versions of slapd: But is there any other way to achive the same thing? I've been told that there is a class called "ExtensibleObject" - might this help? Please bear in mind that my database is big (approx 20Mb) and changing the data may break compatibility with the application. All I really want is to re-create the same kind of "anything-goes" platform that we had with the old 2.2.19 slapd which allowed me to disable all schema-checking. Thanks, Sal

4 6

Threads Backload
by Bill MacAllister 24 Jan '09

24 Jan '09

In looking at some load issues on our servers we have starting recording some cn=Monitor counters for analysis. In particular we would like to understand what cn=Backload,cn=Threads,cn=Monitor contains. On our servers we have threads set to 8 and we have seen maximum backload values of 56. Does this means there are 56 connections waiting for an execution thread? Bill +-------------------------------------------------------- | Bill MacAllister <whm(a)stanford.edu> | Systems Software Programmer, ITS Unix Systems, Stanford University

3 2

Re: dynlist-overlay and requesting an attribute
by Harry Jede 24 Jan '09

24 Jan '09

Am Montag 08 Dezember 2008 schrieb Pierangelo Masarati: > Wilhelm Meier wrote: > >> What version? > > > > 2.4.11 > > There have been at least two fixes to slapo-dynlist since 2.4.11. > Please check whether your issue has already been addressed. openldap Version 2.4.13 The definition: slapd.conf: overlay dynlist dynlist-attrset groupOfURLs memberURL member The record: ldapsearch -x -LLL -M '(&(cn=ab37) (member=uid=jedeh,ou=LEHRER,o=SCHULE,dc=schule,dc=xx))' member memberurl dn: cn=ab37,ou=GRUPPEN,o=SCHULE,dc=schule,dc=xx memberURL: ldap:///dc=schule,dc=xx??sub?(&(gidNumber=101)(sambasid=*)) member: uid=jedeh,ou=LEHRER,o=SCHULE,dc=schule,dc=xx SUCCESS: simple search ldapsearch -x -LLL cn=ab37 memberurl member dn: cn=ab37,ou=GRUPPEN,o=SCHULE,dc=schule,dc=xx memberURL: ldap:///dc=schule,dc=xx??sub?(&(gidNumber=101)(sambasid=*)) member: uid=jedeh,ou=LEHRER,o=SCHULE,dc=schule,dc=xx member: uid=schlotter,ou=LEHRER,o=SCHULE,dc=schule,dc=xx SUCCESS: The search on a static attribute: ldapsearch -x -LLL '(&(cn=ab37) (member=uid=jedeh,ou=LEHRER,o=SCHULE,dc=schule,dc=xx))' member memberurl dn: cn=ab37,ou=GRUPPEN,o=SCHULE,dc=schule,dc=xx memberURL: ldap:///dc=schule,dc=xx??sub?(&(gidNumber=101)(sambasid=*)) member: uid=jedeh,ou=LEHRER,o=SCHULE,dc=schule,dc=xx member: uid=schlotter,ou=LEHRER,o=SCHULE,dc=schule,dc=xx SUCCESS: The compare on a dynamic attribute: ldapcompare -x cn=ab37,ou=GRUPPEN,o=SCHULE,dc=schule,dc=xx member:uid=schlotter,ou=LEHRER,o=SCHULE,dc=schule,dc=xx TRUE FAIL: The search on a dynamic attribute: ldapsearch -x -LLL '(&(cn=ab37) (member=uid=schlotter,ou=LEHRER,o=SCHULE,dc=schule,dc=xx))' member memberurl Even if there is no static member attribute, the result is the same. dynlist works only partial. It is not possible to search for and find a dynamicly generated attribute. And this is the reason, why the command "id" will not enumerate group membership correctly. -- Gruss Harry Jede

2 3

OpenLDAP connecting to remote MySQL server with back-sql
by Jason B 24 Jan '09

24 Jan '09

Hi all, Question for you. I've been racking my brains over this one for most the day without much success, and it seems my Google-Fu is no match for this one. I'm hoping you can help. I'm attempting to setup OpenLDAP (2.4.13) with back-sql running as a module, relying on a MySQL server as a backend. My problem appears to be due to the fact I'm trying to run the database server on a remote host, not the same box as OpenLDAP. Attempting to start OpenLDAP gives the following error: ==>backsql_get_db_conn() ==>backsql_open_db_conn() backsql_open_db_conn: SQLConnect() to database "ldap" as user "dc1auth1" failed: Return code: -1 Native error code: 2002 SQL engine state: 08S01 Message: [MySQL][ODBC 3.51 Driver]Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) backsql_get_db_conn(): could not get connection handle -- returning NULL backsql_db_open(): connection failed, exiting However, obdc.ini (which has been separately tested) is configured to connect to the MySQL server on 192.168.1.34. My understanding is that the dbhost attribute in slapd.conf is ignored - we've set this anyway just to make sure. Extracts from each: Slapd.conf database sql suffix "dc=imagingthesouth,dc=com,dc=au" rootdn "cn=Hostmaster,dc=imagingthesouth,dc=com,dc=au" rootpw stat1c dbname ldap dbhost 192.168.1.36 dbuser dc1auth1 dbpass dc1auth1 subtree_cond "ldap_entries.dn LIKE CONCAT('%',?)" insentry_query "INSERT INTO ldap_entries (dn,oc_map_id,parent,keval) VALUES (?,?,?,?)" odbc.ini [ldap] Description = MySQL connection to Rhapsody Driver = MySQL DSN = ldap Host = 192.168.1.34 Server = 192.168.1.34 Servername = 192.168.1.34 USER = dc1auth1 PASSWORD = passgoeshere Database = rhapsody Port = 3306 Option = Stmt = I'm slightly out of my depth here - any assistance would be greatly appreciated! Many thanks, Jason.

4 3

schema checking
by Andreas Schoe 24 Jan '09

24 Jan '09

Hello, I installed and configured OpenLDAP to multimaster. The replication works great. But there is one problem: In Single Mode schema checking is still present. Since I configured to multimaster there isn't any schema checking. Example: In multimaster mode I can add multiple structural objecclasses to one entry. Is this a configuration problem? I read out that schema checking is always included. os: Solaris 10 8/07 s10s_u4wos_12b SPARC openldap: OpenLDAP 2.4.11 config: dynamic database: bdb olcOverlay: syncprov Best regards Andreas

2 2

Confused about configuring TLS
by Nathan Huesken 24 Jan '09

24 Jan '09

Hi, I want to use TLS on my slapd, which uses the slapd.d config way. On this page: http://www.openldap.org/doc/admin24/tls.html I find a discription of how to do it if one uses a slapd.conf. But how does it work with slapd.d? Thanks! Nathan

3 2

Master to slave replycation - Size limit exceeded
by Proskurin Kirill 24 Jan '09

24 Jan '09

Hello. I try to make a Master to slave replycation with LDAP 2.4.13. Then it was beound 500 entries - all was fine, but now it bigger and replycation fail on start with this error: do_syncrep2: rid=123 LDAP_RES_SEARCH_RESULT (4) Size limit exceeded do_syncrep2: rid=123 (4) Size limit exceeded do_syncrepl: rid=123 retrying (9 retries left) I google this and read few posts. Make all recomendation but nothing helps. I stoped on this conf: limits dn.exact="uid=replicator,ou=ServiceUsers,dc=CAS" size=unlimited time=unlimited limits anonymous size.soft=50 size.hard=100 size.unchecked=32767 time.soft=15 time.hard=60 size=unlimited sizelimit unlimited sizelimit size=unlimited ####################################################################### # BDB database definitions ####################################################################### syncrepl rid=123 provider=ldap://78.129.148.74:389 type=refreshAndPersist interval=0:0:01:00 retry="60 10 300 3" searchbase="dc=CAS" filter="(objectClass=*)" scope=sub attrs="*,+" schemachecking=off bindmethod=simple binddn="uid=replicator,ou=ServiceUsers,dc=CAS" credentials=secret timelimit=unlimited sizelimit=unlimited What else can I do? -- Best regards, Proskurin Kirill

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openldap-software