Hi All,
I have successfully installed and built openLDAP and openSSL. Now I need to configure SSL. I have followed the link http://www.proscrutiny.com/howtos/OpenLDAP.html#confssl-co.
These are the settings in my "slapd.conf"
TLSCipherSuite HIGH:MEDIUM TLSCertificateFile /usr/local/etc/openldap/certs/newcert.pem TLSCertificateKeyFile /usr/local/etc/openldap/certs/privkey.pem TLSCACertificateFile /usr/local/ssl/misc/demoCA/cacert.pem TLSCACertificatePath /usr/local/ssl/misc/demoCA #TLSRandFile <filename> #TLSVerifyClient 0 ------------------------------------------------------------------------ -----
These are the settings in my "ldap.conf" # See ldap.conf(5) for details # This file should be world readable but not world wr
HOST 10.152.72.5 BASE dc=ad,dc=infosys,dc=com URI ldap://10.152.72.5 ldap://10.152.72.5:389 BINDDN "cn=Manager,dc=ad,dc=infosys,dc=com"
SIZELIMIT 12 TIMELIMIT 25 #DEREF never TLS_CACERT /usr/local/ssl/misc/demoCA/cacert.pem ~
When I run the command "./slapd -h 'ldap://10.152.72.5:389/ ldaps://10.152.72.5:636/' -d 255 ", and try to connect to the SSL port, I get the following error messages.
TLS trace: SSL_accept:SSLv3 flush data tls_read: want=5, got=5 0000: 15 03 01 00 02 ..... tls_read: want=2, got=2 0000: 02 30 .0 TLS trace: SSL3 alert read:fatal:unknown CA TLS trace: SSL_accept:failed in SSLv3 read client certificate A TLS: can't accept. TLS: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca s3_pkt.c :1057 connection_read(12): TLS accept failure error=-1 id=3, closing connection_closing: readying conn=3 sd=12 for close connection_close: conn=3 sd=12 daemon: removing 12 daemon: select: listen=7 active_threads=0 tvp=NULL daemon: select: listen=8 active_threads=0 tvp=NULL daemon: activity on 1 descriptor daemon: waked daemon: select: listen=7 active_threads=0 tvp=NULL daemon: select: listen=8 active_threads=0 tvp=NULL
Could you please suggest what is the probable reason for this. Have I configured something incorrectly. Earlier I had tried with a different CA. But the issue was there. That's why I created the Demo Certification Authority(using openssl). But the issue persists.
Regards, Monica Rana
-----Original Message----- From: Sameer N Ingole [mailto:strike@proscrutiny.com] Sent: Thursday, October 12, 2006 6:03 PM To: Monica_Rana Subject: Re: Problem in configuring SSL with openldap
Hi Monica,
Replying off list because this is more of a Solaris/OpenSSL issue. Please ignore my last mail, it was obscure.
If you are referring to Openssl installation, you may want to take a look at this http://www.sunfreeware.com/openssh8.html
Else download OpenSSL from: ftp://ftp.sunfreeware.com/pub/freeware/sparc/8/openssl-0.9.8d-sol8-sparc -local.gz
If you are referring to OpenSSL source installation (downloaded from openssl.org) then there are few things to note: Sun does not ship include libraries (for Solaris 9, I guess) You would want to compile shared version of libraries, it defaults to static By default it is compiled gnu-shared so and for solaris you need to specify solaris-shared instead of gnu-shared
So generally you would do this: edit Configure script - find solaris-x86-gcc or solaris-sparcv9-gcc etc as suitable * Change "gnu-shared" to "solaris-shared". * add "-R/usr/local/ssl/lib " just before "-lsocket"
So now your configure command would look something like..
./Configure solaris-x86-gcc shared
Some of the above things might be inconsistent as last time I worked on solaris was 11 months back.
Regards,
Sameer Ingole. http://weblogic.noroot.org/gallery2/
Monica_Rana wrote:
Hi Sameer,
I have followed the below mentioned steps:
- $ ./config
- $ make
- $ make test
- $ make install.
All the options ran without any errors. Do I need to do anything extra?
Regards, Monica Rana
-----Original Message----- From: Sameer N Ingole [mailto:strike@proscrutiny.com] Sent: Thursday, October 12, 2006 2:34 PM To: openldap-software@openldap.org Cc: Monica_Rana Subject: Re: Problem in configuring SSL with openldap
Did you custom compile Openssl? Did you install development libraries for Openssl?
I suspect absence of development libraries is causing this problem. Also read http://www.columbia.edu/~ariel/ssleay/rsaref.html
Regards,
Sameer Ingole. http://weblogic.noroot.org/gallery2/
<snip>
-----Original Message----- From: Phillip [mailto:phuang@plasmon.cn] Sent: Thursday, October 12, 2006 1:07 PM To: Monica_Rana Cc: openldap-software@openldap.org Subject: Re: Problem in configuring SSL with openldap
Monica,
Maybe you've take a mistake in setting "env", just try:
env CPPFLAGS="-I/usr/local/include -I/usr/local/ssl/include - I/usr/local/db4/include" LDFLAGS="-L/usr/local/ssl/lib - L/usr/local/db4/lib" ./configure --with-tls --with-cyrus-sasl --enable- wrappers --enable-crypt --enable-bdb
You'd better verify the "include" and "lib" path for SSL and DB.
Regards, Phillip
On Thu, 2006-10-12 at 12:18 +0530, Monica_Rana wrote:
Hi All,
I have the following installed on solaris 8. openLDAP 2.3.27 openSSL 0.9.8b.
when i try to configure using the command env CPPFLAGS="-I/usr/local/include -I/usr/local/include/ssl - I/usr/local/include/db4" LDFLAGS="-L/usr/local/ssl/lib -L/usr/local/lib/db4" ./configure --with-tls --with-cyrus-sasl --enable-wrappers -- enable-crypt --enable-bdb it throws the error checking for openssl/ssl.h... yes checking for SSL_library_init in -lssl... no checking for ssl3_accept in -lssl... no checking OpenSSL library version (CRL checking capability)... yes configure: error: Could not locate TLS/SSL package.
Please let me know what could be the possible reson behind. PFA the config.log file.
Regards, Monica Rana
**************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***
--On Tuesday, October 17, 2006 3:08 PM +0530 Monica_Rana Monica_Rana@infosys.com wrote:
Hi All,
I have successfully installed and built openLDAP and openSSL. Now I need to configure SSL. I have followed the link http://www.proscrutiny.com/howtos/OpenLDAP.html#confssl-co.
These are the settings in my "slapd.conf"
Read the OpenLDAP admin guide, and you really probably shouldn't bother the openssl users with openldap configuration questions.
--Quanah
-- Quanah Gibson-Mount Principal Software Developer ITS/Shared Application Services Stanford University GnuPG Public Key: http://www.stanford.edu/~quanah/pgp.html
This looks like a problem in the way you created CA, Key and Certificate. Can you please explain how did you create it? That would be helpful.
Regards, Sadique
Monica_Rana wrote:
Hi All,
I have successfully installed and built openLDAP and openSSL. Now I need to configure SSL. I have followed the link http://www.proscrutiny.com/howtos/OpenLDAP.html#confssl-co.
These are the settings in my "slapd.conf"
TLSCipherSuite HIGH:MEDIUM TLSCertificateFile /usr/local/etc/openldap/certs/newcert.pem TLSCertificateKeyFile /usr/local/etc/openldap/certs/privkey.pem TLSCACertificateFile /usr/local/ssl/misc/demoCA/cacert.pem TLSCACertificatePath /usr/local/ssl/misc/demoCA #TLSRandFile <filename>
#TLSVerifyClient 0
These are the settings in my "ldap.conf" # See ldap.conf(5) for details # This file should be world readable but not world wr
HOST 10.152.72.5 BASE dc=ad,dc=infosys,dc=com URI ldap://10.152.72.5 ldap://10.152.72.5:389 BINDDN "cn=Manager,dc=ad,dc=infosys,dc=com"
SIZELIMIT 12 TIMELIMIT 25 #DEREF never TLS_CACERT /usr/local/ssl/misc/demoCA/cacert.pem ~
When I run the command "./slapd -h 'ldap://10.152.72.5:389/ ldaps://10.152.72.5:636/' -d 255 ", and try to connect to the SSL port, I get the following error messages.
TLS trace: SSL_accept:SSLv3 flush data tls_read: want=5, got=5 0000: 15 03 01 00 02 ..... tls_read: want=2, got=2 0000: 02 30 .0 TLS trace: SSL3 alert read:fatal:unknown CA TLS trace: SSL_accept:failed in SSLv3 read client certificate A TLS: can't accept. TLS: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca s3_pkt.c :1057 connection_read(12): TLS accept failure error=-1 id=3, closing connection_closing: readying conn=3 sd=12 for close connection_close: conn=3 sd=12 daemon: removing 12 daemon: select: listen=7 active_threads=0 tvp=NULL daemon: select: listen=8 active_threads=0 tvp=NULL daemon: activity on 1 descriptor daemon: waked daemon: select: listen=7 active_threads=0 tvp=NULL daemon: select: listen=8 active_threads=0 tvp=NULL
Could you please suggest what is the probable reason for this. Have I configured something incorrectly. Earlier I had tried with a different CA. But the issue was there. That's why I created the Demo Certification Authority(using openssl). But the issue persists.
Regards, Monica Rana
-----Original Message----- From: Sameer N Ingole [mailto:strike@proscrutiny.com] Sent: Thursday, October 12, 2006 6:03 PM To: Monica_Rana Subject: Re: Problem in configuring SSL with openldap
Hi Monica,
Replying off list because this is more of a Solaris/OpenSSL issue. Please ignore my last mail, it was obscure.
If you are referring to Openssl installation, you may want to take a look at this http://www.sunfreeware.com/openssh8.html
Else download OpenSSL from: ftp://ftp.sunfreeware.com/pub/freeware/sparc/8/openssl-0.9.8d-sol8-sparc -local.gz
If you are referring to OpenSSL source installation (downloaded from openssl.org) then there are few things to note: Sun does not ship include libraries (for Solaris 9, I guess) You would want to compile shared version of libraries, it defaults to static By default it is compiled gnu-shared so and for solaris you need to specify solaris-shared instead of gnu-shared
So generally you would do this: edit Configure script - find solaris-x86-gcc or solaris-sparcv9-gcc etc as suitable
- Change "gnu-shared" to "solaris-shared".
- add "-R/usr/local/ssl/lib " just before "-lsocket"
So now your configure command would look something like..
./Configure solaris-x86-gcc shared
Some of the above things might be inconsistent as last time I worked on solaris was 11 months back.
Regards,
Sameer Ingole. http://weblogic.noroot.org/gallery2/
Monica_Rana wrote:
Hi Sameer,
I have followed the below mentioned steps:
- $ ./config
- $ make
- $ make test
- $ make install.
All the options ran without any errors. Do I need to do anything extra?
Regards, Monica Rana
-----Original Message----- From: Sameer N Ingole [mailto:strike@proscrutiny.com] Sent: Thursday, October 12, 2006 2:34 PM To: openldap-software@openldap.org Cc: Monica_Rana Subject: Re: Problem in configuring SSL with openldap
Did you custom compile Openssl? Did you install development libraries for Openssl?
I suspect absence of development libraries is causing this problem. Also read http://www.columbia.edu/~ariel/ssleay/rsaref.html
Regards,
Sameer Ingole. http://weblogic.noroot.org/gallery2/
<snip>
-----Original Message----- From: Phillip [mailto:phuang@plasmon.cn] Sent: Thursday, October 12, 2006 1:07 PM To: Monica_Rana Cc: openldap-software@openldap.org Subject: Re: Problem in configuring SSL with openldap
Monica,
Maybe you've take a mistake in setting "env", just try:
env CPPFLAGS="-I/usr/local/include -I/usr/local/ssl/include - I/usr/local/db4/include" LDFLAGS="-L/usr/local/ssl/lib - L/usr/local/db4/lib" ./configure --with-tls --with-cyrus-sasl --enable- wrappers --enable-crypt --enable-bdb
You'd better verify the "include" and "lib" path for SSL and DB.
Regards, Phillip
On Thu, 2006-10-12 at 12:18 +0530, Monica_Rana wrote:
Hi All,
I have the following installed on solaris 8. openLDAP 2.3.27 openSSL 0.9.8b.
when i try to configure using the command env CPPFLAGS="-I/usr/local/include -I/usr/local/include/ssl - I/usr/local/include/db4" LDFLAGS="-L/usr/local/ssl/lib -L/usr/local/lib/db4" ./configure --with-tls --with-cyrus-sasl --enable-wrappers -- enable-crypt --enable-bdb it throws the error checking for openssl/ssl.h... yes checking for SSL_library_init in -lssl... no checking for ssl3_accept in -lssl... no checking OpenSSL library version (CRL checking capability)... yes configure: error: Could not locate TLS/SSL package.
Please let me know what could be the possible reson behind. PFA the config.log file.
Regards, Monica Rana
**************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***
openldap-software@openldap.org
-
Monica_Rana -
Quanah Gibson-Mount -
Sadique Puthen