Thank you very much for that!! do you know if it support md5crypt or if there any stong algorithm instead? for example phpldapadmin has it as an option, but I want to force it.

Best regards Thanks for your time and support

On 08/25/2016 01:23 PM, Clément OUDOT wrote:

Le 25/08/2016 à 18:12, Net Warrior a écrit :

...

Hi Guys

I need some guidance on this, I configured a ppolicy for a DIT which has all the users in plain password, I added to following to the policy

changetype: modify replace: olcPPolicyHashCleartext olcPPolicyHashCleartext: FALSE

When the user reset it password, it changes from clear password to encrypted using ssha but I want to store them using md5crypt, what do I need to change in my configuration?

See olcPasswordHash parameter.

From man slapd-config :

   olcPasswordHash: <hash> [<hash>...]
          This  option  configures  one  or more hashes to be used 

in generation of user passwords stored in the userPassword attribute during processing of LDAP Password Modify Extended Operations (RFC 3062). The <hash> must be one of {SSHA}, {SHA}, {SMD5}, {MD5}, {CRYPT}, and {CLEARTEXT}. The default is {SSHA}.

          {SHA} and {SSHA} use the SHA-1 algorithm (FIPS 160-1), 

the latter with a seed.

          {MD5} and {SMD5} use the MD5 algorithm (RFC 1321), the 

latter with a seed.

          {CRYPT} uses the crypt(3).

          {CLEARTEXT} indicates that the new password should be 

added to userPassword as clear text.

          Note  that  this  option  does not alter the normal user 

applications handling of userPassword during LDAP Add, Modify, or other LDAP operations. This setting is only allowed in the frontend entry.

--On Thursday, August 25, 2016 3:03 PM -0300 Net Warrior netwarrior863@gmail.com wrote:

Thank you very much for that!! do you know if it support md5crypt or if there any stong algorithm instead? for example phpldapadmin has it as an

Use the contrib SSHA2 module. I personally use SSHA512 in my deployments.

--Quanah

--

Quanah Gibson-Mount

It depends on what your operating system’s crypt(3) supports. Most Linux/Unix system should support MD5crypt, but that is no longer considered secure (per the original author, PHK).

If you want to use SHA256crypt you would use:

olcPasswordCryptSaltFormat: $5$%.16s

If you want to use SHA512crypt, then

olcPasswordCryptSaltFormat: $6$%.16s

The SHA2crypt family is discussed more at:

https://en.wikipedia.org/wiki/Crypt_(C)#SHA2-based_scheme https://www.akkadia.org/drepper/sha-crypt.html

I’m not sure what the difference/s between SHA2crypt and SSHA2 is/are. Most Linux distributions use SHA512crypt to secure root’s password in the shadow(5) file if that means anything.

On Aug 25, 2016, at 13:02, Net Warrior netwarrior863@gmail.com wrote:

Thank you very much for that!! do you know if it support md5crypt or if there any stong algorithm instead? for example phpldapadmin has it as an option, but I want to force it.

Best regards Thanks for your time and support

On 08/25/2016 01:23 PM, Clément OUDOT wrote:

...

Le 25/08/2016 à 18:12, Net Warrior a écrit :

...

Hi Guys

I need some guidance on this, I configured a ppolicy for a DIT which has all the users in plain password, I added to following to the policy

changetype: modify replace: olcPPolicyHashCleartext olcPPolicyHashCleartext: FALSE

When the user reset it password, it changes from clear password to encrypted using ssha but I want to store them using md5crypt, what do I need to change in my configuration?

See olcPasswordHash parameter.

From man slapd-config :

  olcPasswordHash: <hash> [<hash>...]
         This  option  configures  one  or more hashes to be used in generation of user passwords stored in the userPassword attribute during processing of LDAP
         Password Modify Extended Operations (RFC 3062).  The <hash> must be one of {SSHA}, {SHA}, {SMD5}, {MD5}, {CRYPT}, and  {CLEARTEXT}.   The  default  is
         {SSHA}.

         {SHA} and {SSHA} use the SHA-1 algorithm (FIPS 160-1), the latter with a seed.

         {MD5} and {SMD5} use the MD5 algorithm (RFC 1321), the latter with a seed.

         {CRYPT} uses the crypt(3).

         {CLEARTEXT} indicates that the new password should be added to userPassword as clear text.

         Note  that  this  option  does not alter the normal user applications handling of userPassword during LDAP Add, Modify, or other LDAP operations.  This
         setting is only allowed in the frontend entry.

On Aug 25, 2016, at 19:54, Quanah Gibson-Mount quanah@zimbra.com wrote:

--On Thursday, August 25, 2016 8:46 PM -0400 David Magda dmagda@ee.ryerson.ca wrote:

...

It depends on what your operating system's crypt(3) supports. Most Linux/Unix system should support MD5crypt, but that is no longer considered secure (per the original author, PHK).

Some crypt implementations are non-portable, so using crypt can be problematic. Generally with the SSHA2 contrib module, there's not a need to go the crypt route.

More information at https://github.com/openldap/openldap/tree/master/contrib/slapd-modules/passwd/sha2

True, though if all the OpenLDAP servers are running on some variant of Linux or FreeBSD 9 or newer, then SHA256-crypt and SHA512-crypt should be available. Folks from Sun and IBM helped with the creation, so Solaris (10u6 and newer) and I’m guessing some versions of AIX may support it as well (see "/etc/security/pwdalg.cfg”).

Also, unless I’m misreading the C code above (which is entirely possible), it looks like the sha2.c contrib module only does one iteration of hashing. Whereas the SHA2-based-crypt algorithm does at least five thousand by default, and can optionally be told to do unto 999,999,999.

Also, straight SHA2, even with salting, is going to fall quite quickly to John the Ripper and such. The SHA2crypt has been designed specifically to be slow for the purposes of securely storing password hashes.

Quanah Gibson-Mount wrote:

--On Thursday, August 25, 2016 3:03 PM -0300 Net Warrior netwarrior863@gmail.com wrote:

...

Thank you very much for that!! do you know if it support md5crypt or if there any stong algorithm instead? for example phpldapadmin has it as an

Use the contrib SSHA2 module. I personally use SSHA512 in my deployments.

It only does one iteration which is considered fast to crack today.

Ciao, Michael.