Low Sensitivity/Aerospace Internal Use
Only
LTB-Project.org or OpenLDAP.org developers, please help:
I am still having problems with adding
(via .ldif file) the following LDIF file contents of /tmp/LDAP-CONFIG-TLS.ldif:
dn:
cn=config
changetype:
modify
add:
olcTLSCipherSuite
olcTLSCipherSuite:
TLSv1+RSA:\!EXP:\!MD5:\!NULL (<- not sure
if that argument is valid for that CipherSuite selection either)
I use the following ldapmodify command:
ldapmodify -x
-D "cn=admin,cn=config" -W -f /tmp/LDAP-CONFIG-TLS.ldif
Because I have debugging turned up (to
-d 32768), the results now look like:
modifying entry "cn=config"
52e68423 connection_input: conn=1000
deferring operation: binding
slapd: result.c:813: slap_send_ldap_result:
Assertion `!((rs->sr_err)<0)' failed.
ldap_result: Can't contact
LDAP server (-1)
I saw a thread on openldap.org on the
following link, http://www.openldap.org/lists/openldap-bugs/201308/msg00066.html
, that has the exact same error.
I can see that Howard Chu from Symas fixed the problem for Symas,
did LTB Project fix this problem? I cannot find any threads via websearch
for this issue.
What do I need to do in order to get
my LDAP running with TLS?
Warron French, MBA,
SCSA
From:
Warron S French <Warron.S.French@aero.org>
To:
Vikas Parashar <para.vikas@gmail.com>,
Cc:
Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>,
openldap-technical@openldap.org
Date:
01/27/2014 10:19 AM
Subject:
[WARNING: SPOOFED
E-MAIL--Non-Aerospace Sender] Re: Antw: OpenLDAP slapd problems - ldap_result:
Can't contact LDAP server (-1) --- Low Sensitivity/Aerospace Internal Use
Only
Sent by:
openldap-technical-bounces@OpenLDAP.org
Low Sensitivity/Aerospace Internal Use
Only
Vikas, thanks for replying some more, but your last email is a little out
of context for me personally.
I did drop the -b argument (and the associated value) and still the slapd
daemon crashed. I am starting to wonder if this is an OpenLDAP or
LTB Project OpenLDAP problem since no one else is chiming in with solutions
and troubleshooting.
As for the slaptest, it didn't generate any content into
the slapd.d directory at all. I mentioned this to the person I was
collaborating with since I am attempting to document a process from scratch-to-finish.
That same person suggested I attempt to use ApacheDirectoryStudio to interact
with the slapd and configurations. I just attempted to connect to
the cn=config ??Context?? And I was able to add an attribute (olcTLSCipherSuite),
but as soon as I attempted to add a value (HIGH:MEDIUM+TLSv1+SSLv3)
the connection dropped in ApacheDirectoryStudio.
Warron French, MBA, SCSA
From: Vikas
Parashar <para.vikas@gmail.com>
To: Warron
S French <Warron.S.French@aero.org>,
Cc: Ulrich
Windl <Ulrich.Windl@rz.uni-regensburg.de>, openldap-technical@openldap.org
Date: 01/27/2014
09:24 AM
Subject: Re:
Antw: OpenLDAP slapd problems - ldap_result: Can't contact LDAP server
(-1) --- Low Sensitivity/Aerospace Internal Use Only
Hi,
Sorry! that was the typo. -b for the base only. In ldap modify, you don't
need to use -b.
You can do the same thing with slapd.conf file. later on, you can create
a slapd.d directory with the help of slaptest command.
slaptest -f slapd.conf -F slapd.d
In this temporary directory, you will get a configuration({0}config.ldif)
file under slapd.d/cn=conifg directory. you can replace it and resxtart
the service.
Or in current ldapmodify, please run it with deeper debug level. You may
use -d option for it.
On Mon, Jan 27, 2014 at 6:46 PM, Warron S French <Warron.S.French@aero.org>
wrote:
Low Sensitivity/Aerospace Internal Use Only
Ulrich, I attempted what you suggested as well, but I got back a different
error. And I don't know if it makes any difference, but I don't have
TLS configurations in place yet; that is what I am attempting to accomplish.
Anyway, after performing the following command:
ldapmodify -ZZ -x -W -D cn=admin,cn=config -v -f /tmp/LDAP-CONFIG-TLS.ldif
I got the following error in response:
ldap_initialize( <DEFAULT> )
ldap_start_tls: Protocol error (2)
Additional info: unsupported extended operation
Thanks for the help,
Warron French, MBA, SCSA
From: "Ulrich
Windl" <Ulrich.Windl@rz.uni-regensburg.de>
To: "Warron
S French" <Warron.S.French@aero.org>,
<openldap-technical@openldap.org>,
Date: 01/27/2014
02:34 AM
Subject: Antw:
OpenLDAP slapd problems - ldap_result: Can't contact LDAP server (-1) ---
Low Sensitivity/Aerospace Internal Use Only
>>> Warron S French <Warron.S.French@aero.org>
schrieb am 24.01.2014 um 17:28 in
Nachricht
<OFE6BBFCB7.3C423E61-ON85257C6A.005A0B4C-85257C6A.005A6E20@notes.aero.org>:
> Low Sensitivity/Aerospace Internal Use Only
>
> Working on a CentOS-6.5 server, running LTB Project's slapd-2.4.38.
>
> Someone suggested I implement a cn=admin,cn=config for a cn=config
setup.
> (I don't know how to technically word that).
>
>
> Anyway, I need to make TLS-related changes and was told to do the
> following command:
>
> ldapmodify -x -D "cn=admin,cn=config" -W -d
256
Try "ldapmodify -ZZ -x -W -D cn=_your_admin_-v -f _your_ldif_file"
>
> ...then at the blank line type the following, each on a single line:
>
> Dn:
cn=config
> Changetype:
modify
> Add:
olcTLSCipherSuite
> OlcTLSCipherSuite: HIGH:MEDIUM+TLSv1+SSLv3
> <CTRL-D>
>
>
> I have been getting an error reponse of:
> ldap_result: Can't contact LDAP server (-1)
>
> This __ONLY__ occurs after I hit <CTRL-D>, not before. Yes,
the daemon,
> slapd, is actually running, but after this failure it abruptly stops.
I
> know this because in a separate terminal on the same system, I am
running
> a while-loop with a ps -e | grep slapd in it.
>
>
> Please note the "-x" option according to the man page for
ldapmodify is
> supposed to Use simple authentication instead of SASL.
>
>
> Thank you all for your help, hopefully you can:
>
> 1) tell me what this error means, and
> 2) how to fix my problem so that I can complete the olcTLSxxxx changes
I
> need to implement.
>
>
>
>
>
> Warron French, MBA, SCSA
> The Aerospace Corporation
> Sr. UNIX SA & Storage Admin
> Mailstop: CH1-230
> Desk: 571-307-5311
> Cell: 703-967-8936
>
>
> Low Sensitivity/Aerospace Internal Use Only
Low Sensitivity/Aerospace Internal Use Only
Low Sensitivity/Aerospace Internal Use Only
Low Sensitivity/Aerospace Internal Use Only