Hi all,
I have exactly the same issue.
My repro config is within the .tgz attached to this email.
admin user is cn=admin,dc=example,dc=com and test user is uid=chantra,ou=users,dc=example,dc=com
password for both of them is "foobarcode".
To reproduce, on Debian Lenny,
* untar the archive
* cd ldaps
* ./install.sh (WARNING: ONLY DO THIS ON A TEST MACHINE, current setup/db will be ERASED).
That will stop slapd, override the config with the repro config, erase the current database, inject the testing one with slapadd, give credential to /var/lib/ldap to openldap user, start slapd
Then, run:
for i in {1..10}; do ./ldapauth.sh $i; sleep 2; done; ./ldaps.sh
which will perform 10 failed authentication, with a pause of 2 seconds.
Finally, ldaps.sh will output the details of user uid=chantra,ou=users,dc=example,dc=com
@Jiri, have you found a solution yet?
In my repro, here is the result after the 10 failed auth:
# chantra, users, example.com
dn: uid=chantra,ou=users,dc=example,dc=com
structuralObjectClass: inetOrgPerson
entryUUID: 2e93af32-2d8d-102e-8fab-21ae2aafa5d0
creatorsName:
createTimestamp: 20090904105519Z
entryCSN: 20090904105519.875933Z#000000#000#000000
modifiersName:
modifyTimestamp: 20090904105519Z
pwdFailureTime: 20090904105614Z
pwdFailureTime: 20090904105616Z
pwdFailureTime: 20090904105618Z
pwdFailureTime: 20090904105620Z
entryDN: uid=chantra,ou=users,dc=example,dc=com
subschemaSubentry: cn=Subschema
hasSubordinates: FALSE
Again, here, we see only 4 pwdFailureTime (the 5th should have locked user ). Output of syslog is in the attached file called: pwdaccountlockout.txt
but, the main part might be:
Sep 4 12:53:11 lenny32-tpl slapd[4079]: bdb_modify_internal: 0x00000004: uid=chantra,ou=users,dc=example,dc=com
Sep 4 12:53:11 lenny32-tpl slapd[4079]: => access_allowed: delete access to "uid=chantra,ou=users,dc=example,dc=com" "pwdAccountLockedTime" requested
Sep 4 12:53:11 lenny32-tpl slapd[4079]: => dn: [2]
Sep 4 12:53:11 lenny32-tpl slapd[4079]: => acl_get: [3] attr pwdAccountLockedTime
Sep 4 12:53:11 lenny32-tpl slapd[4079]: => slap_access_allowed: result not in cache (pwdAccountLockedTime)
Sep 4 12:53:11 lenny32-tpl slapd[4079]: => acl_mask: access to entry "uid=chantra,ou=users,dc=example,dc=com", attr "pwdAccountLockedTime" requested
Sep 4 12:53:11 lenny32-tpl slapd[4079]: => acl_mask: to all values by "", (=0)
Sep 4 12:53:11 lenny32-tpl slapd[4079]: <= check a_dn_pat: cn=admin,dc=example,dc=com
Sep 4 12:53:11 lenny32-tpl slapd[4079]: <= check a_dn_pat: *
Sep 4 12:53:11 lenny32-tpl slapd[4079]: <= acl_mask: [2] applying read(=rscxd) (stop)
Sep 4 12:53:11 lenny32-tpl slapd[4079]: <= acl_mask: [2] mask: read(=rscxd)
Sep 4 12:53:11 lenny32-tpl slapd[4079]: => slap_access_allowed: delete access denied by read(=rscxd)
Sep 4 12:53:11 lenny32-tpl slapd[4079]: => access_allowed: no more rules
Sep 4 12:53:11 lenny32-tpl slapd[4079]: hdb_modify: modify failed (50)
Same here,
changing:
access to *
by dn="cn=admin,dc=example,dc=com" write
by * read
to
access to *
by dn="cn=admin,dc=example,dc=com" write
by * write
will write pwdAccountLockedtime, but then, users or even anonymous will get far too much credentials :s
I also tried with the settings of openldap-2.4.17/tests/data/slapd-ppolicy.conf, e.g:
access to attrs=userpassword
by self write
by * auth
access to *
by self write
by * read
to no avail.
Michael mentioned to try 2.4.17 which as changes that might affect pwdLockout (actually, ITS#6168 was because users where locked out while pwdLockout was set to FALSE, AFAICS), to no avail
Then, I tried the setting from the archive on Fedora11, and Debian Etch, same issue... There is surely something that I am missing here, but shouldn't pwdAccountLockedTime being handled by the daemon? no access rule should be set ( except the for the fact that the admin user can write/delete it).
What rule am I missing here?
If needed, I can provide a VMDK of the repro, let me know and I will upload it somewhere.
Cheers,
chantra
> Hi,
>
> I am having troubles making the ppolicy overlay to prevent password
> guessing attacks with pwdLockout with slapd-2.4.11-1 in Debian Lenny.
>
> I set pwdMaxFailure to 3. In the user object I am testing with, I never get
> more than two entries for pwdFailureTime and pwdAccountLockedTime is never
> added at all.
>
> I tracked the problem down to the ACL settings in slapd.conf. With my default
> access to *
> by dn="cn=admin,dc=example,dc=net" write
> by * read
> , I get the above result. When I rewrite the last line to "by * write", it works.
>
> The pwdFailureTime is updated, because it is defined as
> NO-USER-MODIFICATION, which bypasses te ACL checks for write.
> The problem happens when pwdMaxFailure failed logins are reached,
> and ppolicy.c tries to update pwdFailureTime and pwdAccountLockedTime
> in a single request.
>
> How is this supposed to work?
> - Shouldn't pwdAccountLockedTime also be defined with NO-USER-MODIFICATION?
>
> - couldn't the update request in ppolicy.c be executed with higher
> privileges? I tried to set up an non-anonymous bind in
> pam_ldap but this did not help.
>
> - is there some recommended ACL setting to grant the necessary privileges so that
> ppolicy.c can update pwdAccountLockedTime, but users can't?
> I am a splapd newbie, so maybe I don't see something obvious, but in
> the log below, I see: "acl_mask: to all values by "", (=0)" -- that
> looks like an anonymous bind, right? Allowing write for the
> pwdAccountLockedTime attribute to anyone does not seem a good idea ;-)
>
>
>
> Thanks for any insight!
>
>
> Jiri
>
>
>
> P.S.: some detailed notes from my debugging are attached below:
>
> I am authenticating with pam-ldap. When I mis-type the password
> of a user and do a search on the user object (with a +, to see
> the operational attributes), the pwdFailureTime is created. This
> is good.
>
> When I preform the bad login again, I get a second value for
> pwdFailureTime. Still good.
>
> But on the next login, instead of getting a third value for
> pwdFailureTime and an updated value for pwdAccountLockedTime, nothing
> happens. I put some more debug info into ppolicy_bind_response() like
> this:
>
> -----
> * We only count those failures
> * which are not due to expire.
> */
> Debug(LDAP_DEBUG_ANY, "xxx: counting pwdFailureTime %i/%d\n", i, fc, 0);
> }
> }
> if ((ppb->pp.pwdMaxFailure > 0) &&
> (fc >= ppb->pp.pwdMaxFailure - 1)) {
> Debug(LDAP_DEBUG_ANY, "xxx: trying to insert pwdAccountLockedTime\n", 0, 0, 0);
> -----
>
> ... in the logs (with loglevel 65535), I really see:
>
> ------
> Aug 8 00:05:42 localhost slapd[15416]: xxx: counting pwdFailureTime 0/1
> Aug 8 00:05:42 localhost slapd[15416]: xxx: counting pwdFailureTime 1/2
> Aug 8 00:05:42 localhost slapd[15416]: xxx: trying to insert pwdAccountLockedTime
> [snip]
> Aug 8 00:05:42 localhost slapd[15416]: => access_allowed: delete access to "uid=j.bohac,ou=users,dc=example,dc=net" "pwdAccountLockedTime" requested
> Aug 8 00:05:42 localhost slapd[15416]: => acl_get: [2] attr pwdAccountLockedTime
> Aug 8 00:05:42 localhost slapd[15416]: => slap_access_allowed: result not in cache (pwdAccountLockedTime)
> Aug 8 00:05:42 localhost slapd[15416]: => acl_mask: access to entry "uid=j.bohac,ou=users,dc=example,dc=net", attr "pwdAccountLockedTime" requested
> Aug 8 00:05:42 localhost slapd[15416]: => acl_mask: to all values by "", (=0)
> Aug 8 00:05:42 localhost slapd[15416]: <= check a_dn_pat: cn=admin,dc=example,dc=net
> Aug 8 00:05:42 localhost slapd[15416]: <= check a_dn_pat: *
> Aug 8 00:05:42 localhost slapd[15416]: <= acl_mask: [2] applying read(=rscxd) (stop)
> Aug 8 00:05:42 localhost slapd[15416]: <= acl_mask: [2] mask: read(=rscxd)
> Aug 8 00:05:42 localhost slapd[15416]: => slap_access_allowed: delete access denied by read(=rscxd)
> Aug 8 00:05:42 localhost slapd[15416]: => access_allowed: no more rules
> ------
>
!DSPAM:4aa1064790404668414040!