From the results below it looks like your
server is not even coming up. This would explain why you are not able to search
or add entries. Next thing to look at is to see if you are getting any useful
information in the slapd.log. This should be in /var/log/slapd.log. If you don’t
know where it is located then try using the locate command I think ubuntu
should have that or something equivalent.
If you don’t find one then you might
need to enable the log in /etc/syslog.conf.
I use RH so I assume something similar is
available on ubuntu.
I added the list back to the CC so others
that might know more about ubuntu specifics can help and so they can assist you
as well.
--Kris
From: Donny George
[mailto:donny008@gmail.com]
Sent: Wednesday, November 19, 2008
3:13 PM
To: Burton, Kris - Acision
Subject: Re: cont contact server
since 3 days+please help
hello kris
this are the results that i get when i try to listen , guess this is not wat u
were expecting
root@ubuntu:/home/administrator# ps -eaf | grep slapd
root 14183 14172 0 22:07 pts/0
00:00:00 grep slapd
root@ubuntu:/home/administrator# netstat -na | grep 389
root@ubuntu:/home/administrator# telnet 10.4.139.5
389
Trying 10.4.139.5...
telnet: Unable to connect to remote host: Connection refused
i tried the earlier steps like ldapsearch -d 255 after reading different forums
of ldap but please dont misunderstand me to be an expert in openldap
could you tell me how to establish the connectivity or where did i go wrong
thanking you
don
On Wed, Nov 19, 2008 at 10:16 AM,
Have you on the server side verified that LDAP is up and
listening on the proper port?
ps –eaf | grep slapd
netstat -na | grep 389
tcp
0 0 0.0.0.0:389
0.0.0.0:*
LISTEN
If the above come back and indicate it is up and listening
see if you can telnet to the <ip> 389 and get something back.
Also you could check to see if you are getting errors on
server startup by checking the slapd.log on the server side and see if it is
reporting any errors.
If you are using the command line search are you specifying
the remote server using the –h option?
Most of the errors seem to indicate there is nothing
listening on the server to handle the search request.
--Kris Burton
From:
openldap-technical-bounces+kris.burton=acision.com@OpenLDAP.org [mailto:openldap-technical-bounces+kris.burton=acision.com@OpenLDAP.org] On Behalf Of Donny George
Sent: Wednesday, November 19, 2008
8:47 AM
To: openldap-technical@openldap.org
Subject: cont contact server since
3 days+please help
hello all
i am a beginner with openldap and installed a server and a client with
ldap(both machines ubuntu 8.04)
but once i tried to populate the database at the server it gave the error that
it couldnt contact the server. i cudnt connect to the server frmo the client
either.
i ran the command ldapsearch -d 255 to debug and heres the result
ldap_create
ldap_pvt_sasl_getmech
ldap_search
put_filter: "(objectclass=*)"
put_filter: simple
put_simple_filter: "objectclass=*"
ldap_build_search_req ATTRS: supportedSASLMechanisms
ldap_send_initial_request
ldap_new_connection 1 1 0
ldap_int_open_connection
ldap_connect_to_host: TCP 10.4.139.5:389
ldap_new_socket: 3
ldap_prepare_socket: 3
ldap_connect_to_host: Trying 10.4.139.5:389
ldap_pvt_connect: fd: 3 tm: -1 async: 0
ldap_close_socket: 3
ldap_err2string
ldap_sasl_interactive_bind_s: Can't contact LDAP server (-1)
and if i run ldapsearch -x it gives the message
ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1)
please someone help, i dont know where i cud start to solve this error.
--
Donny George
This e-mail and any attachment is for authorised use by the intended
recipient(s) only. It may contain proprietary material, confidential
information and/or be subject to legal privilege. It should not be copied,
disclosed to, retained or used by, any other party. If you are not an intended
recipient then please promptly delete this e-mail and any attachment and all
copies and inform the sender. Thank you.
--
Donny George